Sander wrote (ao):
# Hi Jeff and others,
#
# I get a kernel BUG message when I try to create a raid1 or raid5 over
# nine 64MB partitions located on nine sata disks (Maxtor Pro 500) on a
# fresh setup. The system locks hard: no sysrq.
#
# The onboard controller is an nVidia nForce with three disks.
# The six other disks are connected to a Marvell 88SX6081 controller.
#
# Last night and the first half of today all disks were tested with
# badblocks in write mode, which the system survived just fine (one disk
# out of ten detected as broken, so nine disks left).
#
# A google search leads me to
#
# http://www.uwsg.iu.edu/hypermail/linux/kernel/0601.2/0479.html
#
# and
#
# http://www.uwsg.iu.edu/hypermail/linux/kernel/0601.2/0626.html
#
# I had MSI disabled in the .config already, and will try again with debug
# options set.
#
# In the mean time, is this of any help?
#
# I can try any patch you throw at me, or any config option, as this
# system is not in production yet.
#
# Sander
#
# Linux version 2.6.16-rc3 (root@elisha) (gcc version 4.0.3 20060104 (prerelease) (Debian 4.0.2-6))
#
# mdadm -C -l1 -n9 /dev/md0 /dev/sda1 /dev/sdb1 /dev/sdc1 \
# /dev/sdd1 /dev/sde1 /dev/sdf1 /dev/sdg1 /dev/sdh1 /dev/sdi1
#
# [19697.866199] md: bind<sda1>
# [19697.866251] md: bind<sdc1>
# [19697.866294] md: bind<sdd1>
# [19697.866332] md: bind<sde1>
# [19697.866374] md: bind<sdf1>
# [19697.866414] md: bind<sdg1>
# [19697.866454] md: bind<sdh1>
# [19697.866492] md: bind<sdi1>
# [19697.866531] md: bind<sdj1>
# [19697.866734] raid1: raid set md0 active with 9 out of 9 mirrors
# [19697.866888] ----------- [cut here ] --------- [please bite here ] ---------
# [19697.866921] Kernel BUG at drivers/scsi/sata_mv.c:1018
# [19697.866950] invalid opcode: 0000 [1] SMP
# [19697.866984] CPU 1
# [19697.867010] Modules linked in:
# [19697.867040] Pid: 2491, comm: mdadm Not tainted 2.6.16-rc3 #1
# [19697.867075] RIP: 0010:[<ffffffff8029975a>] <ffffffff8029975a>{mv_qc_prep+307}
# [19697.867103] RSP: 0000:ffff81013fc9bd28 EFLAGS: 00010002
# [19697.867152] RAX: ffff81000c63f03d RBX: ffff81013a691500 RCX: ffff81000c63f02a
# [19697.867186] RDX: ffff81013a5639d8 RSI: 0000000000000046 RDI: ffff81013a5639b8
# [19697.867220] RBP: ffff81013a5639b8 R08: 0000000000000004 R09: ffff81013fc9bc4c
# [19697.867267] R10: 00000000000000c3 R11: ffffffff802e188d R12: 0000000000000000
# [19697.867302] R13: ffff81013a563480 R14: ffffffff8027d502 R15: ffff81013a563480
# [19697.867335] FS: 00002b35e01f7ae0(0000) GS:ffff81013fc759c0(0000) knlGS:0000000000000000
# [19697.867384] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
# [19697.867415] CR2: 0000000000511768 CR3: 00000001333fc000 CR4: 00000000000006e0
# [19697.867450] Process mdadm (pid: 2491, threadinfo ffff81013a040000, task ffff81013a591020)
# [19697.867497] Stack: ffff81013a5639b8 ffff81013a5639b8 ffff81013a603280 ffffffff802932bd
# [19697.867546] ffff81013a603280 ffff81013a5639b8 ffff81013a562280 ffff81013a563558
# [19697.867624] ffff81013a563480 ffffffff8027d502
# [19697.867662] Call Trace: <IRQ> <ffffffff802932bd>{ata_qc_issue+794}
# [19697.867710] <ffffffff8027d502>{scsi_done+0} <ffffffff8029765d>{ata_scsi_translate+172}
# [19697.867778] <ffffffff802972ae>{ata_scsi_rw_xlat+0} <ffffffff8027d502>{scsi_done+0}
I would like to add that this is on a 64bit Opteron system. With these
debug options enabled, I get (albeit little) extra output.
Is there anything I can do to get more output?
CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_KOBJECT=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set
[ 500.043196] md: bind<sda1>
[ 500.043320] md: bind<sdb1>
[ 500.046718] md: bind<sdc1>
[ 500.046828] md: bind<sdd1>
[ 500.046935] md: bind<sde1>
[ 500.047043] md: bind<sdf1>
[ 500.047147] md: bind<sdg1>
[ 500.047254] md: bind<sdh1>
[ 500.047357] md: bind<sdi1>
[ 500.047834] raid1: raid set md0 active with 9 out of 9 mirrors
[ 500.048039] ----------- [cut here ] --------- [please bite here ] ---------
[ 500.048093] Kernel BUG at drivers/scsi/sata_mv.c:1018
[ 500.048143] invalid opcode: 0000 [1] SMP
[ 500.048241] CPU 1
[ 500.048309] Modules linked in:
[ 500.048381] Pid: 2379, comm: mdadm Not tainted 2.6.16-rc3 #1
[ 500.048431] RIP: 0010:[<ffffffff802b17e3>] <ffffffff802b17e3>{mv_qc_prep+320}
[ 500.048503] RSP: 0000:ffff81013fca7bd8 EFLAGS: 00010002
[ 500.048592] RAX: ffff810006c9a03d RBX: ffff81013b35dda0 RCX: ffff810006c9a08a
[ 500.048646] RDX: ffff81013ac44aa0 RSI: 0000000000000092 RDI: ffff81013ac44a80
[ 500.048701] RBP: ffff81013fca7bf8 R08: 0000000000000004 R09: ffff81013fca7afc
[ 500.048757] R10: 00000000000000c3 R11: ffffffff80585968 R12: ffff81013ac44a80
[ 500.048812] R13: 0000000000000000 R14: ffff81013ac44548 R15: ffffffff80293f69
[ 500.048867] FS: 00002adb0f5c4ae0(0000) GS:ffff81013fc52e88(0000) knlGS:0000000000000000
[ 500.048936] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 500.048990] CR2: 00007ffffff98e98 CR3: 000000013295c000 CR4: 00000000000006e0
[ 500.049046] Process mdadm (pid: 2379, threadinfo ffff81013a26e000, task ffff81013b2b7820)
[ 500.049114] Stack: ffff81013b385a48 ffff81013ac44548 ffff81013ac44a80 ffff81013b385a48
[ 500.049277] ffff81013fca7c48 ffffffff802aae98 ffff81013fca7c48 ffff81013ac44548
[ 500.049491] ffff81013b385a48 ffff81013ac44a80
[ 500.049622] Call Trace: <IRQ> <ffffffff802aae98>{ata_qc_issue+855}
[ 500.049779] <ffffffff80293f69>{scsi_done+0} <ffffffff802af549>{ata_scsi_translate+190}
[ 500.049958] <ffffffff802af187>{ata_scsi_rw_xlat+0} <ffffffff80293f69>{scsi_done+0}
[ 535.019510] BUG: spinlock lockup on CPU#1, mdadm/2379, ffff81013f6c4b78
[ 535.019561]
[ 535.019562] Call Trace: <IRQ> <ffffffff80217e87>{_raw_spin_lock+219}
[ 535.019718] <ffffffff80398a25>{_spin_lock+9} <ffffffff802b1d6f>{mv_interrupt+86}
[ 535.019889] <ffffffff801403af>{handle_IRQ_event+48} <ffffffff8014048f>{__do_IRQ+167}
[ 535.020064] <ffffffff8010d2c5>{do_IRQ+62} <ffffffff8010ae64>{ret_from_intr+0}
[ 535.020236] <ffffffff80114a5f>{smp_send_stop+71} <ffffffff80123819>{panic+165}
[ 535.023678] <ffffffff8010beee>{show_stack+211} <ffffffff8012604c>{do_exit+133}
[ 535.023851] <ffffffff8010c3e9>{kernel_math_error+0} <ffffffff8010c999>{do_trap+237}
[ 535.024022] <ffffffff80293f69>{scsi_done+0} <ffffffff8010ce10>{do_invalid_op+157}
[ 535.024194] <ffffffff802b17e3>{mv_qc_prep+320} <ffffffff802fe42a>{pci_conf1_read+204}
[ 535.024523] <ffffffff8021bfbb>{pci_bus_read_config_dword+121} <ffffffff8010b5fd>{error_exit+0}
[ 535.024696] <ffffffff80293f69>{scsi_done+0} <ffffffff802b17e3>{mv_qc_prep+320}
[ 535.024868] <ffffffff802aae98>{ata_qc_issue+855} <ffffffff80293f69>{scsi_done+0}
[ 535.025038] <ffffffff802af549>{ata_scsi_translate+190}
--
Humilis IT Services and Solutions
http://www.humilis.net
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
