Re: netconsole problem

["JaniD++" <djani22@dynamicweb.hu>]

----- Original Message ----- 
From: "Matt Mackall" <mpm@selenic.com>
To: "JaniD++" <djani22@dynamicweb.hu>
Cc: <linux-kernel@vger.kernel.org>
Sent: Sunday, February 12, 2006 11:43 PM
Subject: Re: netconsole problem


> On Sun, Feb 12, 2006 at 11:45:52PM +0100, JaniD++ wrote:
> > > On Fri, Feb 10, 2006 at 03:23:23PM +0100, JaniD++ wrote:
> > > > Hello, list,
> > > >
> > > > I have a little problem, with netconsole.
> > > > It does not work for me.
> > > >
> > > > On the "client":
> > > >
> > > > modprobe netconsole netconsole=@/,514@192.168.2.100/
> > > > dmesg:
> > > > netconsole: local port 6665
> > > > netconsole: interface eth0
> > > > netconsole: remote port 514
> > > > netconsole: remote IP 192.168.2.100
> > > > netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
> > > > netconsole: local IP 192.168.2.50
> > > > netconsole: network logging started
> > > >
> > > > (kernel: 2.6.15-rc5, and 2.6.16-rc1,2)
> > > >
> > > > On the server:
> > > > ]# netcat -u -l -v -s 192.168.2.100 -p 514
> > > > 192.168.2.100: inverse host lookup failed: Unknown host
> > > > listening on [192.168.2.100] 514 ...
> > > >
> > > > And nothing comes.
> > > >
> > > > The firewall is off on both system.
> > > > The ping comes from any direction.
> > > >
> > > > If i try the remote and local syslog, it works well, two.
> > > > And in this case, the netlog only displays what the syslog is sends.
> > > >
> > > > What can be the problem?
> > >
> > > Perhaps your console log level is set too low. Fedora for instance is
> > > very quiet by default.
> >
> > Sorry, i was not clear enough....
> > The system, what i want to debug is RedHat 9.0, with kernel 2.6.15,
2.6.16-*
> > The syslog server is Fedora, and the syslog to syslog messages is works,
but
> > netconsole to syslog (and netconsole to netcat) is the problem,
including
> > the init-message!
> >
> > At this time i try to receive with another redhat 9, but it looks like
the
> > netconsole did not working properly for me. :(
>
> Netconsole logging level is based off the _console log level_, which
> defaults to quiet on recent Redhat releases. If it doesn't show up on
> the console, netconsole doesn't see it either.

The netconsole had worked for me some months ago, but i have made some
changes on the system... (some software, more hardware)
OK, i will see it.
Where can i get/set this loglevel?

Thanks,
Janos

>
> -- 
> Mathematics is the supreme nostalgia of our time.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/