Re: libata PATA status report on 2.6.16-rc1-mm5

[Chris Boot <bootc@bootc.net>]

On 8 Feb 2006, at 17:26, Alan Cox wrote:

> On Mer, 2006-02-08 at 15:44 +0000, Chris Boot wrote:
> > My next step will be to play with the CD drive. Any hints on
> > stress-testing the drive? Obviously writing a CD then comparing to  
> > the
> > ISO will be one step, but any others?
> The PATA specific code is almost entirely in the setup stages. Once  
> the
> setup is done then (with the exception of early PIIX devices, radisys,
> triflex and a couple of other oddities) there is no "new" code  
> actually
> being run.
>
> Alan
Well, I've just tried 2.6.16-rc2-ide2 on another VIA-based machine  
and it seems to work just fine, allowing me to say CONFIG_IDE=n :-)  
The CD drives work just fine including writing CDs, so I'm going to  
try writing a DVD soon, which should stress it a little more.  
However, I keep getting the following messages in dmesg:
[4294985.285000] Assertion failed! qc->n_elem > 0,drivers/scsi/libata- 
core.c,ata_fill_sg,line=2635
[4294985.377000] Assertion failed! qc->n_elem > 0,drivers/scsi/libata- 
core.c,ata_fill_sg,line=2635
This seems mostly harmless as everything seems to just work, but  
curious nonetheless.
HTH,
Chris

--
Chris Boot
bootc@bootc.net
http://www.bootc.net/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/