Re: NCR 53c700-66 MCA(EISA) doesn't want to work(2.4.x)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sad, 2006-02-11 at 22:55 +0100, Zdenek Styblik wrote:
> I have Intel Professional Workstation with LP468 motherboard which has
> everything else except PCI. There is integrated SCSI controller NCR
> 53c700-66 50pin which is probably on MCA(or EISA bus). Problem is that
> I can't make it work. I tried NCR 53c7xx, 8xx support(naturally), but

I had an old panther board years and years ago although it blew up in
the end and which is similar. I always used the IDE on it.

There is an NCR53C700 core driver in the SCSI layer and MCA drivers for
a couple of boards but at minimum I suspect you are looking at writing a
new board interface assuming you can get enough information to do so.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux