Unable to read DVDs - what could be wrong?

[Helge Hafting <helge.hafting@broadpark.no>]

(Using kernel 2.6.16rc2 on amd64)

I have this dvd writer:
hda: PLEXTOR DVDR PX-712A, ATAPI CD/DVD-ROM drive

It works well for reading and burning CDs, but it seem to be unable to
use DVDs.

I tried to mount a dvd, and got "No medium found".
cat /dev/hda also got that message, so it can't be a missing fs driver.

I only have one data dvd - it could theoretically be broken.
But attempts to play movies are equally fruitless, and I know those works.

Booting with a dvd in the drive gives me this in dmesg:

VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
    ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: PLEXTOR DVDR PX-712A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 94X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hda: packet command error: status=0x51 { DriveReady SeekComplete Error }
hda: packet command error: error=0x44 { AbortedCommand 
LastFailedSense=0x04 }
ide: failed opcode was: unknown
ATAPI device hda:
  Error: Hardware error -- (Sense key=0x04)
  Tracking servo failure -- (asc=0x09, ascq=0x01)
  The failed "Read Cd/Dvd Capacity" packet command was:
  "25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "

I have upgraded the device from firmware 1.01 to the latest which is 
1.07.  That and a cold boot changed nothing.

Am I doing something wrong/stupid here?  Strange if it is broken,
I haven't used it that much and it is flawless with CDs.

Helge Hafting
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/