Re: skge bridge & hw csum failure (Was: Re: [BUG] sky2 broken for Yukon PCI-E Gigabit Ethernet Controller 11ab:4362 (rev 19))

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jan 30, 2006 at 04:15:51PM -0800, Stephen Hemminger wrote:
> Okay, what is the hardware version:
> 	dmesg | grep skge
> Maybe that chip rev is no good.
skge 1.3 addr 0xd042c000 irq 169 chip Yukon-Lite rev 7
skge eth0: addr 00:10:f3:06:83:d4
skge 1.3 addr 0xd0420000 irq 193 chip Yukon-Lite rev 7
skge eth1: addr 00:10:f3:06:83:d5
skge 1.3 addr 0xd0424000 irq 185 chip Yukon-Lite rev 7
skge eth2: addr 00:10:f3:06:83:d6
skge 1.3 addr 0xd0428000 irq 177 chip Yukon-Lite rev 7
skge eth3: addr 00:10:f3:06:83:d7

In related news, the box has been running with a 2.6.16-rc1-git4 based
kernel for 8 hours now without any errors. First kernel+driver version
that does that (apart from vendor-sk98lin on a kernel without slab
debugging ;) ;) ;) ). 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux