Re: I/O errors while dding between 2 SATA drives

[Tejun <htejun@gmail.com>]

James Lamanna wrote:
> I received the following errors while executing a
> dd if=/dev/sdb of=/dev/sda bs=1M
> between 2 500GB SATA Seagate Barracuda drives on 2.6.12 (Gentoo 2005.1
> "Live" CD)
>
> ata1: command 0x35 timeout stat 0xd1 host_stat 0x21
> ata1: status=0xd1 { Busy }
> end request: I/O Error dev sda, sector 51188392
> Buffer I/O Error on device sda, logical block 6398549
> lost page write due to I/O Error on sda
> ATA: abnormal status 0xD1 on port 0x9F7
> ATA: abnormal status 0xD1 on port 0x9F7
> ATA: abnormal status 0xD1 on port 0x9F7
>
> The message repeats every so often with the sector count increasing by
> 8 and logical block count increasing by 1.
>
> Is it bad hardware? (sda is brand new)
> And is the copy hosed?

[CC'ing linux-ide]

Hi, James.

Please post full dmesg and yeah the copy is probably hosed.  dd's exit 
code will tell you.  Do 'echo $$'.

--
tejun
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/