Re: Display corruption with radeonfb after resuming from suspend-to-ram

[Pavel Machek <pavel@ucw.cz>]

Hi!

> I have a hard-to-reproduce problem with radeonfb and suspend-to-ram:
> 
> I'm using radeonfb with fbcon in a pure console environment for most
> os the time (with mplayer on X11 being the rare exception) and I
> sometimes encounter display corruption after resuming from suspend to
> RAM. My notebook is a ThinkPad X31 with this Radeon model:
> 
> 0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY (prog-if 00 [VGA])
>         Subsystem: IBM: Unknown device 052f
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B+
>         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 66 (2000ns min), Cache Line Size: 0x08 (32 bytes)
>         Interrupt: pin A routed to IRQ 11
>         Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
>         Region 1: I/O ports at 3000 [size=256]
>         Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
>         Expansion ROM at c0120000 [disabled] [size=128K]
>         Capabilities: <available only to root>
> 
> Resuming from suspend-to-ram works flawless in roughly 98% of all cases, but
> sometimes the display gets corrupted; some bits are set in the display in a
> weird way and the display starts to shift with every line break. An
> example:

Happens here, too... or happened, I think I have a solution. Reseting
video card during resume seems like a way to go.

Could you get s2ram.c from www.sf.net/projects/suspend, and add your
X31 with same parameters as X32 system, and let me know if it helps?

(You'll need an -mm kernel for parameter to be passed into kernel).

								Pavel
-- 
Thanks, Sharp!
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/