This patch adds raid5_reshape and end_reshape which will
start and finish the reshape processes.
raid5_reshape is only enabled in CONFIG_MD_RAID5_RESHAPE is set,
to discourage accidental use.
Don't use this on valuable data.
Read the 'help' for the CONFIG_MD_RAID5_RESHAPE entry.
and Make sure to avoid use on valuable data.
Signed-off-by: Neil Brown <[email protected]>
### Diffstat output
./drivers/md/Kconfig | 24 +++++++++
./drivers/md/md.c | 7 +-
./drivers/md/raid5.c | 117 ++++++++++++++++++++++++++++++++++++++++++++++
./include/linux/raid/md.h | 3 -
4 files changed, 147 insertions(+), 4 deletions(-)
diff ./drivers/md/Kconfig~current~ ./drivers/md/Kconfig
--- ./drivers/md/Kconfig~current~ 2006-01-24 10:39:52.000000000 +1100
+++ ./drivers/md/Kconfig 2006-01-24 10:40:21.000000000 +1100
@@ -127,6 +127,30 @@ config MD_RAID5
If unsure, say Y.
+config MD_RAID5_RESHAPE
+ bool "Support adding drives to a raid-5 array (highly experimental)"
+ depends on MD_RAID5 && EXPERIMENTAL
+ ---help---
+ A RAID-5 set can be expanded by adding extra drives. This
+ requires "restriping" the array which means (almost) every
+ block must be written to a different place.
+
+ This option allows this restriping to be done while the array
+ is online. However it is VERY EARLY EXPERIMENTAL code.
+ In particular, if anything goes wrong while the restriping
+ is happening, such as a power failure or a crash, all the
+ data on the array will be LOST beyond any reasonable hope
+ of recovery.
+
+ This option is provided for experimentation and testing.
+ Please do NOT use it on valuable data without good, tested, backups.
+
+ Any reasonable current version of 'mdadm' can start an expansion
+ with e.g. mdadm --grow /dev/md0 --raid-disks=6
+ Note: The array can only be expanded, not contracted.
+ There should be enough spares already present to make the new
+ array workable.
+
config MD_RAID6
tristate "RAID-6 mode"
depends on BLK_DEV_MD
diff ./drivers/md/md.c~current~ ./drivers/md/md.c
--- ./drivers/md/md.c~current~ 2006-01-24 10:39:52.000000000 +1100
+++ ./drivers/md/md.c 2006-01-24 10:40:21.000000000 +1100
@@ -158,12 +158,12 @@ static int start_readonly;
*/
static DECLARE_WAIT_QUEUE_HEAD(md_event_waiters);
static atomic_t md_event_count;
-static void md_new_event(mddev_t *mddev)
+void md_new_event(mddev_t *mddev)
{
atomic_inc(&md_event_count);
wake_up(&md_event_waiters);
}
-
+EXPORT_SYMBOL_GPL(md_new_event);
/*
* Enables to iterate over all existing md arrays
* all_mddevs_lock protects this list.
@@ -4444,7 +4444,7 @@ static DECLARE_WAIT_QUEUE_HEAD(resync_wa
#define SYNC_MARKS 10
#define SYNC_MARK_STEP (3*HZ)
-static void md_do_sync(mddev_t *mddev)
+void md_do_sync(mddev_t *mddev)
{
mddev_t *mddev2;
unsigned int currspeed = 0,
@@ -4679,6 +4679,7 @@ static void md_do_sync(mddev_t *mddev)
set_bit(MD_RECOVERY_DONE, &mddev->recovery);
md_wakeup_thread(mddev->thread);
}
+EXPORT_SYMBOL_GPL(md_do_sync);
/*
diff ./drivers/md/raid5.c~current~ ./drivers/md/raid5.c
--- ./drivers/md/raid5.c~current~ 2006-01-24 10:40:14.000000000 +1100
+++ ./drivers/md/raid5.c 2006-01-24 10:40:21.000000000 +1100
@@ -1022,6 +1022,8 @@ static int add_stripe_bio(struct stripe_
return 0;
}
+static void end_reshape(raid5_conf_t *conf);
+
int stripe_to_pdidx(sector_t stripe, raid5_conf_t *conf, int disks)
{
int sectors_per_chunk = conf->chunk_size >> 9;
@@ -1832,6 +1834,10 @@ static sector_t sync_request(mddev_t *md
if (sector_nr >= max_sector) {
/* just being told to finish up .. nothing much to do */
unplug_slaves(mddev);
+ if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery)) {
+ end_reshape(conf);
+ return 0;
+ }
if (mddev->curr_resync < max_sector) /* aborted */
bitmap_end_sync(mddev->bitmap, mddev->curr_resync,
@@ -2452,6 +2458,114 @@ static int raid5_resize(mddev_t *mddev,
return 0;
}
+static int raid5_reshape(mddev_t *mddev, int raid_disks)
+{
+ raid5_conf_t *conf = mddev_to_conf(mddev);
+ int err;
+ mdk_rdev_t *rdev;
+ struct list_head *rtmp;
+ int spares = 0;
+ int added_devices = 0;
+
+ if (mddev->degraded ||
+ test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
+ return -EBUSY;
+ if (conf->raid_disks > raid_disks)
+ return -EINVAL; /* Cannot shrink array yet */
+ if (conf->raid_disks == raid_disks)
+ return 0; /* nothing to do */
+
+ /* Can only proceed if there are plenty of stripe_heads.
+ * We need a minimum of one full stripe,, and for sensible progress
+ * it is best to have about 4 times that.
+ * If we require 4 times, then the default 256 4K stripe_heads will
+ * allow for chunk sizes up to 256K, which is probably OK.
+ * If the chunk size is greater, user-space should request more
+ * stripe_heads first.
+ */
+ if ((mddev->chunk_size / STRIPE_SIZE) * 4 > conf->max_nr_stripes) {
+ printk(KERN_WARNING "raid5: reshape: not enough stripes. Needed %lu\n",
+ (mddev->chunk_size / STRIPE_SIZE)*4);
+ return -ENOSPC;
+ }
+
+ ITERATE_RDEV(mddev, rdev, rtmp)
+ if (rdev->raid_disk < 0 &&
+ !test_bit(Faulty, &rdev->flags))
+ spares++;
+ if (conf->raid_disks + spares < raid_disks-1)
+ /* Not enough devices even to make a degraded array
+ * of that size
+ */
+ return -EINVAL;
+
+ err = resize_stripes(conf, raid_disks);
+ if (err)
+ return err;
+
+ spin_lock_irq(&conf->device_lock);
+ conf->previous_raid_disks = conf->raid_disks;
+ mddev->raid_disks = conf->raid_disks = raid_disks;
+ conf->expand_progress = 0;
+ spin_unlock_irq(&conf->device_lock);
+
+ /* Add some new drives, as many as will fit.
+ * We know there are enough to make the newly sized array work.
+ */
+ ITERATE_RDEV(mddev, rdev, rtmp)
+ if (rdev->raid_disk < 0 &&
+ !test_bit(Faulty, &rdev->flags)) {
+ if (raid5_add_disk(mddev, rdev)) {
+ char nm[20];
+ set_bit(In_sync, &rdev->flags);
+ conf->working_disks++;
+ added_devices++;
+ sprintf(nm, "rd%d", rdev->raid_disk);
+ sysfs_create_link(&mddev->kobj, &rdev->kobj, nm);
+ } else
+ break;
+ }
+
+ mddev->degraded = (raid_disks - conf->previous_raid_disks) - added_devices;
+ clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
+ clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
+ set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
+ set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
+ mddev->sync_thread = md_register_thread(md_do_sync, mddev,
+ "%s_reshape");
+ if (!mddev->sync_thread) {
+ mddev->recovery = 0;
+ spin_lock_irq(&conf->device_lock);
+ mddev->raid_disks = conf->raid_disks = conf->previous_raid_disks;
+ conf->expand_progress = MaxSector;
+ spin_unlock_irq(&conf->device_lock);
+ return -EAGAIN;
+ }
+ md_wakeup_thread(mddev->sync_thread);
+ md_new_event(mddev);
+ return 0;
+}
+
+static void end_reshape(raid5_conf_t *conf)
+{
+ struct block_device *bdev;
+
+ conf->mddev->array_size = conf->mddev->size * (conf->mddev->raid_disks-1);
+ set_capacity(conf->mddev->gendisk, conf->mddev->array_size << 1);
+ conf->mddev->changed = 1;
+
+ bdev = bdget_disk(conf->mddev->gendisk, 0);
+ if (bdev) {
+ mutex_lock(&bdev->bd_inode->i_mutex);
+ i_size_write(bdev->bd_inode, conf->mddev->array_size << 10);
+ mutex_unlock(&bdev->bd_inode->i_mutex);
+ bdput(bdev);
+ }
+ spin_lock_irq(&conf->device_lock);
+ conf->expand_progress = MaxSector;
+ spin_unlock_irq(&conf->device_lock);
+}
+
static void raid5_quiesce(mddev_t *mddev, int state)
{
raid5_conf_t *conf = mddev_to_conf(mddev);
@@ -2490,6 +2604,9 @@ static struct mdk_personality raid5_pers
.spare_active = raid5_spare_active,
.sync_request = sync_request,
.resize = raid5_resize,
+#if CONFIG_MD_RAID5_RESHAPE
+ .reshape = raid5_reshape,
+#endif
.quiesce = raid5_quiesce,
};
diff ./include/linux/raid/md.h~current~ ./include/linux/raid/md.h
--- ./include/linux/raid/md.h~current~ 2006-01-24 10:39:52.000000000 +1100
+++ ./include/linux/raid/md.h 2006-01-24 10:40:21.000000000 +1100
@@ -92,7 +92,8 @@ extern void md_super_write(mddev_t *mdde
extern void md_super_wait(mddev_t *mddev);
extern int sync_page_io(struct block_device *bdev, sector_t sector, int size,
struct page *page, int rw);
-
+extern void md_do_sync(mddev_t *mddev);
+extern void md_new_event(mddev_t *mddev);
#define MD_BUG(x...) { printk("md: bug in file %s, line %d\n", __FILE__, __LINE__); md_print_devices(); }
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]