Re: spurious 8259A interrupt: IRQ7

["Jiri Slaby" <xslaby@fi.muni.cz>]

>Hello,
>
>I have this problem with irq 7. There are many ERR interrupts as you can see in
>the table below.
>Count of errorneous is similar to count of radeon interrupts (since start of
>system).
>It appears in all kernels I tried (since 2.6.11.7).
>           CPU0       
>  0:     367164          XT-PIC  timer
>  1:       2397          XT-PIC  i8042
>  2:          0          XT-PIC  cascade
>  5:       5355          XT-PIC  ATI IXP, eth0
>  8:          1          XT-PIC  rtc
>  9:        163          XT-PIC  acpi
> 10:      25595          XT-PIC  ehci_hcd:usb1, ohci_hcd:usb2, ohci_hcd:usb3
> 11:      85385          XT-PIC  radeon@pci:0000:01:05.0
> 12:       4991          XT-PIC  i8042
> 14:       8576          XT-PIC  ide0
> 15:      12774          XT-PIC  ide1
>NMI:          0 
>LOC:     367136 
>ERR:      82119
>MIS:          0
>
>without running X, there is no ERR (and also no irq 11).
>Card:
>01:05.0 VGA compatible controller: ATI Technologies Inc RS300M AGP [Radeon Mobility 9100IGP] (prog-if 00 [VGA])
>        Subsystem: ASUSTeK Computer Inc.: Unknown device 1902
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>        Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 64 (2000ns min), Cache Line Size 10
>        Interrupt: pin A routed to IRQ 11
>        Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M]
>        Region 1: I/O ports at d000 [size=256]
>        Region 2: Memory at fda00000 (32-bit, non-prefetchable) [size=64K]
>        Expansion ROM at fd900000 [disabled] [size=128K]
>        Capabilities: [58] AGP version 3.0
>                Status: RQ=256 Iso- ArqSz=0 Cal=7 SBA+ ITACoh- GART64- HTrans- 64bit+ FW+ AGP3+ Rate=x4,x8
>                Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8
>        Capabilities: [50] Power Management version 2
>                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Me again, I found out, that if I load parport_pc (its irq handler takes
care of irq7, i guess) earlier than X starts, there is no line spurious IRQ7.
Does this mean badly written radeon int handler or somewhat?

thanks,
--
Jiri Slaby         www.fi.muni.cz/~xslaby
~\-/~      jirislaby@gmail.com      ~\-/~
B67499670407CE62ACC8 22A032CC55C339D47A7E
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/