Hi,
I'd appreciate more testing of this SATA ACPI patch.
It applies to 2.6.16-git9.
It's been posted on linux-ide several times (earlier versions),
but it needs more exposure/testing/feedback.
This is the quilt 'combined' patch. The patch series is also
available at
http://www.xenotime.net/linux/SATA/2.6.16-git9/
---
From: Randy Dunlap <[email protected]>
Add support for ACPI methods to SATA suspend/resume.
Add calls to ACPI methods for SATA drives.
Use ata_exec_internal().
libata new debugging macro definitions
Add and use 'noacpi' parameter for libata-acpi.
Add and use 'printk' parameter for libata (parts).
Update Documentation/kernel-parameters.txt, including atapi_enabled.
Signed-off-by: Randy Dunlap <[email protected]>
---
Documentation/DocBook/libata.tmpl | 6
Documentation/kernel-parameters.txt | 13
drivers/scsi/Kconfig | 5
drivers/scsi/Makefile | 3
drivers/scsi/libata-acpi.c | 586 ++++++++++++++++++++++++++
drivers/scsi/libata-core.c | 17
drivers/scsi/libata.h | 38 +
include/linux/libata.h | 58 ++
8 files changed, 718 insertions(+), 8 deletions(-)
--- linux-2615-g9.orig/drivers/scsi/Makefile
+++ linux-2615-g9/drivers/scsi/Makefile
@@ -164,6 +164,9 @@ CFLAGS_ncr53c8xx.o := $(ncr53c8xx-flags-
zalon7xx-objs := zalon.o ncr53c8xx.o
NCR_Q720_mod-objs := NCR_Q720.o ncr53c8xx.o
libata-objs := libata-core.o libata-scsi.o
+ifeq ($(CONFIG_SCSI_SATA_ACPI),y)
+ libata-objs += libata-acpi.o
+endif
oktagon_esp_mod-objs := oktagon_esp.o oktagon_io.o
# Files generated that shall be removed upon make clean
--- linux-2615-g9.orig/drivers/scsi/Kconfig
+++ linux-2615-g9/drivers/scsi/Kconfig
@@ -599,6 +599,11 @@ config SCSI_SATA_INTEL_COMBINED
depends on IDE=y && !BLK_DEV_IDE_SATA && (SCSI_SATA_AHCI || SCSI_ATA_PIIX)
default y
+config SCSI_SATA_ACPI
+ bool
+ depends on SCSI_SATA && ACPI
+ default y
+
config SCSI_BUSLOGIC
tristate "BusLogic SCSI support"
depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API
--- linux-2615-g9.orig/include/linux/libata.h
+++ linux-2615-g9/include/linux/libata.h
@@ -33,9 +33,11 @@
#include <asm/io.h>
#include <linux/ata.h>
#include <linux/workqueue.h>
+#include <acpi/acpi.h>
/*
- * compile-time options
+ * compile-time options: to be removed as soon as all the drivers are
+ * converted to the new debugging mechanism
*/
#undef ATA_DEBUG /* debugging output */
#undef ATA_VERBOSE_DEBUG /* yet more debugging output */
@@ -71,6 +73,38 @@
}
#endif
+/* NEW: debug levels */
+#define HAVE_LIBATA_MSG 1
+
+enum {
+ ATA_MSG_DRV = 0x0001,
+ ATA_MSG_INFO = 0x0002,
+ ATA_MSG_PROBE = 0x0004,
+ ATA_MSG_WARN = 0x0008,
+ ATA_MSG_MALLOC = 0x0010,
+ ATA_MSG_CTL = 0x0020,
+ ATA_MSG_INTR = 0x0040,
+ ATA_MSG_ERR = 0x0080,
+};
+
+#define ata_msg_drv(p) ((p)->msg_enable & ATA_MSG_DRV)
+#define ata_msg_info(p) ((p)->msg_enable & ATA_MSG_INFO)
+#define ata_msg_probe(p) ((p)->msg_enable & ATA_MSG_PROBE)
+#define ata_msg_warn(p) ((p)->msg_enable & ATA_MSG_WARN)
+#define ata_msg_malloc(p) ((p)->msg_enable & ATA_MSG_MALLOC)
+#define ata_msg_ctl(p) ((p)->msg_enable & ATA_MSG_CTL)
+#define ata_msg_intr(p) ((p)->msg_enable & ATA_MSG_INTR)
+#define ata_msg_err(p) ((p)->msg_enable & ATA_MSG_ERR)
+
+static inline u32 ata_msg_init(int dval, int default_msg_enable_bits)
+{
+ if (dval < 0 || dval >= (sizeof(u32) * 8))
+ return default_msg_enable_bits; /* should be 0x1 - only driver info msgs */
+ if (!dval)
+ return 0;
+ return (1 << dval) - 1;
+}
+
/* defines only for the constants which don't work well as enums */
#define ATA_TAG_POISON 0xfafbfcfdU
@@ -315,6 +349,11 @@ struct ata_device {
u16 cylinders; /* Number of cylinders */
u16 heads; /* Number of heads */
u16 sectors; /* Number of sectors per track */
+
+#ifdef CONFIG_SCSI_SATA_ACPI
+ /* ACPI objects info */
+ acpi_handle obj_handle;
+#endif
};
struct ata_port {
@@ -356,6 +395,8 @@ struct ata_port {
unsigned int hsm_task_state;
unsigned long pio_task_timeout;
+ u32 msg_enable;
+
void *private_data;
};
@@ -640,9 +681,9 @@ static inline u8 ata_wait_idle(struct at
if (status & (ATA_BUSY | ATA_DRQ)) {
unsigned long l = ap->ioaddr.status_addr;
- printk(KERN_WARNING
- "ATA: abnormal status 0x%X on port 0x%lX\n",
- status, l);
+ if (ata_msg_warn(ap))
+ printk(KERN_WARNING "ATA: abnormal status 0x%X on port 0x%lX\n",
+ status, l);
}
return status;
@@ -734,7 +775,8 @@ static inline u8 ata_irq_ack(struct ata_
status = ata_busy_wait(ap, bits, 1000);
if (status & bits)
- DPRINTK("abnormal status 0x%X\n", status);
+ if (ata_msg_err(ap))
+ printk(KERN_ERR "abnormal status 0x%X\n", status);
/* get controller status; clear intr, err bits */
if (ap->flags & ATA_FLAG_MMIO) {
@@ -752,8 +794,10 @@ static inline u8 ata_irq_ack(struct ata_
post_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
}
- VPRINTK("irq ack: host_stat 0x%X, new host_stat 0x%X, drv_stat 0x%X\n",
- host_stat, post_stat, status);
+ if (ata_msg_intr(ap))
+ printk(KERN_INFO "%s: irq ack: host_stat 0x%X, new host_stat 0x%X, drv_stat 0x%X\n",
+ __FUNCTION__,
+ host_stat, post_stat, status);
return status;
}
--- linux-2615-g9.orig/Documentation/DocBook/libata.tmpl
+++ linux-2615-g9/Documentation/DocBook/libata.tmpl
@@ -787,6 +787,12 @@ and other resources, etc.
!Idrivers/scsi/libata-scsi.c
</chapter>
+ <chapter id="libataAcpi">
+ <title>libata ACPI interfaces/methods</title>
+!Edrivers/scsi/ata_acpi.c
+!Idrivers/scsi/ata_acpi.c
+ </chapter>
+
<chapter id="ataExceptions">
<title>ATA errors & exceptions</title>
--- /dev/null
+++ linux-2615-g9/drivers/scsi/libata-acpi.c
@@ -0,0 +1,586 @@
+/*
+ * libata-acpi.c
+ * Provides ACPI support for PATA/SATA.
+ *
+ * Copyright (C) 2005 Intel Corp.
+ * Copyright (C) 2005 Randy Dunlap
+ */
+
+#include <linux/ata.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <acpi/acpi.h>
+#include "scsi.h"
+#include <linux/libata.h>
+#include <linux/pci.h>
+#include "libata.h"
+
+#include <acpi/acpi_bus.h>
+#include <acpi/acnames.h>
+#include <acpi/acnamesp.h>
+#include <acpi/acparser.h>
+#include <acpi/acexcep.h>
+#include <acpi/acmacros.h>
+#include <acpi/actypes.h>
+
+#define SATA_ROOT_PORT(x) (((x) >> 16) & 0xffff)
+#define SATA_PORT_NUMBER(x) ((x) & 0xffff) /* or NO_PORT_MULT */
+#define NO_PORT_MULT 0xffff
+#define SATA_ADR_RSVD 0xffffffff
+
+#define REGS_PER_GTF 7
+struct taskfile_array {
+ u8 tfa[REGS_PER_GTF]; /* regs. 0x1f1 - 0x1f7 */
+};
+
+/**
+ * sata_get_dev_handle - finds acpi_handle and PCI device.function
+ * @dev: device to locate
+ * @handle: returned acpi_handle for @dev
+ * @pcidevfn: return PCI device.func for @dev
+ *
+ * This function is somewhat SATA-specific. Or at least the
+ * IDE and SCSI versions of this function are different,
+ * so it's not entirely generic code.
+ *
+ * Returns 0 on success, <0 on error.
+ */
+static int sata_get_dev_handle(struct device *dev, acpi_handle *handle,
+ acpi_integer *pcidevfn)
+{
+ struct pci_dev *pci_dev;
+ acpi_integer addr;
+
+ pci_dev = to_pci_dev(dev); /* NOTE: PCI-specific */
+ /* Please refer to the ACPI spec for the syntax of _ADR. */
+ addr = (PCI_SLOT(pci_dev->devfn) << 16) | PCI_FUNC(pci_dev->devfn);
+ *pcidevfn = addr;
+ *handle = acpi_get_child(DEVICE_ACPI_HANDLE(dev->parent), addr);
+ if (!*handle)
+ return -ENODEV;
+ return 0;
+}
+
+struct walk_info { /* can be trimmed some */
+ struct device *dev;
+ struct acpi_device *adev;
+ acpi_handle handle;
+ acpi_integer pcidevfn;
+ unsigned int drivenum;
+ acpi_handle obj_handle;
+ struct ata_port *ataport;
+ struct ata_device *atadev;
+ u32 sata_adr;
+ int status;
+ char basepath[ACPI_PATHNAME_MAX];
+ int basepath_len;
+};
+
+static acpi_status get_devices(acpi_handle handle,
+ u32 level, void *context, void **return_value)
+{
+ acpi_status status;
+ struct walk_info *winfo = context;
+ struct acpi_buffer namebuf = {ACPI_ALLOCATE_BUFFER, NULL};
+ char *pathname;
+ struct acpi_buffer buffer;
+ struct acpi_device_info *dinfo;
+
+ status = acpi_get_name(handle, ACPI_FULL_PATHNAME, &namebuf);
+ if (status)
+ goto ret;
+ pathname = namebuf.pointer;
+
+ buffer.length = ACPI_ALLOCATE_BUFFER;
+ buffer.pointer = NULL;
+ status = acpi_get_object_info(handle, &buffer);
+
+ if (ACPI_SUCCESS(status)) {
+ dinfo = buffer.pointer;
+
+ /* find full device path name for pcidevfn */
+ if (dinfo && (dinfo->valid & ACPI_VALID_ADR) &&
+ dinfo->address == winfo->pcidevfn) {
+ if (ata_msg_probe(winfo->ataport))
+ printk(KERN_DEBUG
+ ":%s: matches pcidevfn (0x%llx)\n",
+ pathname, winfo->pcidevfn);
+ strlcpy(winfo->basepath, pathname,
+ sizeof(winfo->basepath));
+ winfo->basepath_len = strlen(pathname);
+ goto out;
+ }
+
+ /* if basepath is not yet known, ignore this object */
+ if (!winfo->basepath_len)
+ goto out;
+
+ /* if this object is in scope of basepath, maybe use it */
+ if (strncmp(pathname, winfo->basepath,
+ winfo->basepath_len) == 0) {
+ if (!(dinfo->valid & ACPI_VALID_ADR))
+ goto out;
+ if (ata_msg_probe(winfo->ataport))
+ printk(KERN_DEBUG "GOT ONE: (%s) "
+ "root_port = 0x%llx, port_num = 0x%llx\n",
+ pathname,
+ SATA_ROOT_PORT(dinfo->address),
+ SATA_PORT_NUMBER(dinfo->address));
+ /* heuristics: */
+ if (SATA_PORT_NUMBER(dinfo->address) != NO_PORT_MULT)
+ if (ata_msg_probe(winfo->ataport))
+ printk(KERN_DEBUG
+ "warning: don't know how to handle SATA port multiplier\n");
+ if (SATA_ROOT_PORT(dinfo->address) ==
+ winfo->ataport->port_no &&
+ SATA_PORT_NUMBER(dinfo->address) == NO_PORT_MULT) {
+ if (ata_msg_probe(winfo->ataport))
+ printk(KERN_DEBUG
+ "THIS ^^^^^ is the requested SATA drive (handle = 0x%p)\n",
+ handle);
+ winfo->sata_adr = dinfo->address;
+ winfo->obj_handle = handle;
+ }
+ }
+out:
+ acpi_os_free(dinfo);
+ }
+ acpi_os_free(pathname);
+
+ret:
+ return status;
+}
+
+/* Get the SATA drive _ADR object. */
+static int get_sata_adr(struct device *dev, acpi_handle handle,
+ acpi_integer pcidevfn, unsigned int drive,
+ struct ata_port *ap,
+ struct ata_device *atadev, u32 *dev_adr)
+{
+ acpi_status status;
+ struct walk_info *winfo;
+ int err = -ENOMEM;
+
+ winfo = kzalloc(sizeof(struct walk_info), GFP_KERNEL);
+ if (!winfo)
+ goto out;
+
+ winfo->dev = dev;
+ winfo->atadev = atadev;
+ winfo->ataport = ap;
+ if (acpi_bus_get_device(handle, &winfo->adev) < 0)
+ if (ata_msg_probe(ap))
+ printk(KERN_DEBUG "acpi_bus_get_device failed\n");
+ winfo->handle = handle;
+ winfo->pcidevfn = pcidevfn;
+ winfo->drivenum = drive;
+
+ status = acpi_get_devices(NULL, get_devices, winfo, NULL);
+ if (ACPI_FAILURE(status)) {
+ if (ata_msg_probe(ap))
+ printk(KERN_DEBUG "%s: acpi_get_devices failed\n",
+ __FUNCTION__);
+ err = -ENODEV;
+ } else {
+ *dev_adr = winfo->sata_adr;
+ atadev->obj_handle = winfo->obj_handle;
+ err = 0;
+ }
+ kfree(winfo);
+out:
+ return err;
+}
+
+/**
+ * ata_acpi_push_id - send Identify data to a drive
+ * @ap: the ata_port for the drive
+ * @ix: drive index
+ *
+ * Must be after Identify (Packet) Device -- uses its data.
+ */
+int ata_acpi_push_id(struct ata_port *ap, unsigned int ix)
+{
+ acpi_handle handle;
+ acpi_integer pcidevfn;
+ int err = -ENODEV;
+ struct device *dev = ap->host_set->dev;
+ struct ata_device *atadev = &ap->device[ix];
+ u32 dev_adr;
+ acpi_status status;
+ struct acpi_object_list input;
+ union acpi_object in_params[1];
+
+ if (noacpi)
+ return 0;
+
+ if (ata_msg_probe(ap))
+ printk(KERN_DEBUG
+ "%s: ap->id: %d, ix = %d, port#: %d, hard_port#: %d\n",
+ __FUNCTION__, ap->id, ix,
+ ap->port_no, ap->hard_port_no);
+
+ /* Don't continue if not a SATA device. */
+ if (!ata_id_is_sata(atadev->id)) {
+ if (ata_msg_probe(ap))
+ printk(KERN_DEBUG "%s: ata_id_is_sata is False\n",
+ __FUNCTION__);
+ goto out;
+ }
+
+ /* Don't continue if device has no _ADR method.
+ * _SDD is intended for known motherboard devices. */
+ err = sata_get_dev_handle(dev, &handle, &pcidevfn);
+ if (err < 0) {
+ if (ata_msg_probe(ap))
+ printk(KERN_DEBUG
+ "%s: sata_get_dev_handle failed (%d\n",
+ __FUNCTION__, err);
+ goto out;
+ }
+
+ /* Get this drive's _ADR info. if not already known. */
+ if (!atadev->obj_handle) {
+ dev_adr = SATA_ADR_RSVD;
+ err = get_sata_adr(dev, handle, pcidevfn, ix, ap, atadev,
+ &dev_adr);
+ if (err < 0 || dev_adr == SATA_ADR_RSVD ||
+ !atadev->obj_handle) {
+ if (ata_msg_probe(ap))
+ printk(KERN_DEBUG "%s: get_sata_adr failed: "
+ "err=%d, dev_adr=%u, obj_handle=0x%p\n",
+ __FUNCTION__, err, dev_adr,
+ atadev->obj_handle);
+ goto out;
+ }
+ }
+
+ /* Give the drive Identify data to the drive via the _SDD method */
+ /* _SDD: set up input parameters */
+ input.count = 1;
+ input.pointer = in_params;
+ in_params[0].type = ACPI_TYPE_BUFFER;
+ in_params[0].buffer.length = sizeof(atadev->id);
+ in_params[0].buffer.pointer = (u8 *)atadev->id;
+ /* Output buffer: _SDD has no output */
+
+ /* It's OK for _SDD to be missing too. */
+ swap_buf_le16(atadev->id, ATA_ID_WORDS);
+ status = acpi_evaluate_object(atadev->obj_handle, "_SDD", &input, NULL);
+ swap_buf_le16(atadev->id, ATA_ID_WORDS);
+
+ err = ACPI_FAILURE(status) ? -EIO : 0;
+ if (err < 0) {
+ if (ata_msg_probe(ap))
+ printk(KERN_DEBUG
+ "ata%u(%u): %s _SDD error: status = 0x%x\n",
+ ap->id, ap->device->devno,
+ __FUNCTION__, status);
+ }
+out:
+ return err;
+}
+EXPORT_SYMBOL_GPL(ata_acpi_push_id);
+
+/**
+ * do_drive_get_GTF - get the drive bootup default taskfile settings
+ * @ap: the ata_port for the drive
+ * @atadev: target ata_device
+ * @gtf_length: number of bytes of _GTF data returned at @gtf_address
+ * @gtf_address: buffer containing _GTF taskfile arrays
+ *
+ * This applies to both PATA and SATA drives.
+ *
+ * The _GTF method has no input parameters.
+ * It returns a variable number of register set values (registers
+ * hex 1F1..1F7, taskfiles).
+ * The <variable number> is not known in advance, so have ACPI-CA
+ * allocate the buffer as needed and return it, then free it later.
+ *
+ * The returned @gtf_length and @gtf_address are only valid if the
+ * function return value is 0.
+ */
+int do_drive_get_GTF(struct ata_port *ap, struct ata_device *atadev,
+ unsigned int *gtf_length, unsigned long *gtf_address)
+{
+ acpi_status status;
+ acpi_handle handle;
+ acpi_integer pcidevfn;
+ u32 dev_adr;
+ struct acpi_buffer output;
+ union acpi_object *out_obj;
+ struct device *dev = ap->host_set->dev;
+ int err = -ENODEV;
+
+ if (ata_msg_probe(ap))
+ printk(KERN_DEBUG
+ "%s: ENTER: ap->id: %d, port#: %d, hard_port#: %d\n",
+ __FUNCTION__, ap->id,
+ ap->port_no, ap->hard_port_no);
+
+ *gtf_length = 0;
+ *gtf_address = 0UL;
+
+ if (noacpi)
+ return 0;
+
+ if (!ata_dev_present(atadev) ||
+ (ap->flags & ATA_FLAG_PORT_DISABLED)) {
+ if (ata_msg_probe(ap))
+ printk(KERN_DEBUG "%s: ERR: "
+ "ata_dev_present: %d, PORT_DISABLED: %lu\n",
+ __FUNCTION__, ata_dev_present(atadev),
+ ap->flags & ATA_FLAG_PORT_DISABLED);
+ goto out;
+ }
+
+ /* Don't continue if device has no _ADR method.
+ * _GTF is intended for known motherboard devices. */
+ err = sata_get_dev_handle(dev, &handle, &pcidevfn);
+ if (err < 0) {
+ if (ata_msg_probe(ap))
+ printk(KERN_DEBUG
+ "%s: sata_get_dev_handle failed (%d\n",
+ __FUNCTION__, err);
+ goto out;
+ }
+
+ /* Get this drive's _ADR info. if not already known. */
+ if (!atadev->obj_handle) {
+ dev_adr = SATA_ADR_RSVD;
+ err = get_sata_adr(dev, handle, pcidevfn, 0, ap, atadev,
+ &dev_adr);
+ if (err < 0 || dev_adr == SATA_ADR_RSVD ||
+ !atadev->obj_handle) {
+ if (ata_msg_probe(ap))
+ printk(KERN_DEBUG "%s: get_sata_adr failed: "
+ "err=%d, dev_adr=%u, obj_handle=0x%p\n",
+ __FUNCTION__, err, dev_adr,
+ atadev->obj_handle);
+ goto out;
+ }
+ }
+
+ /* Setting up output buffer */
+ output.length = ACPI_ALLOCATE_BUFFER;
+ output.pointer = NULL; /* ACPI-CA sets this; save/free it later */
+
+ /* _GTF has no input parameters */
+ err = -EIO;
+ status = acpi_evaluate_object(atadev->obj_handle, "_GTF",
+ NULL, &output);
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_DEBUG
+ "%s: Run _GTF error: status = 0x%x\n",
+ __FUNCTION__, status);
+ goto out;
+ }
+
+ if (!output.length || !output.pointer) {
+ printk(KERN_DEBUG
+ "%s: Run _GTF: length or ptr is NULL (0x%llx, 0x%p)\n",
+ __FUNCTION__,
+ (unsigned long long)output.length, output.pointer);
+ acpi_os_free(output.pointer);
+ goto out;
+ }
+
+ out_obj = output.pointer;
+ if (out_obj->type != ACPI_TYPE_BUFFER) {
+ acpi_os_free(output.pointer);
+ printk(KERN_DEBUG "%s: Run _GTF: error: "
+ "expected object type of ACPI_TYPE_BUFFER, got 0x%x\n",
+ __FUNCTION__, out_obj->type);
+ err = -ENOENT;
+ goto out;
+ }
+
+ if (out_obj->buffer.length % REGS_PER_GTF) {
+ if (ata_msg_drv(ap))
+ printk(KERN_ERR "%s: unexpected GTF length (%d)\n",
+ __FUNCTION__, out_obj->buffer.length);
+ err = -ENOENT;
+ goto out;
+ }
+
+ *gtf_length = out_obj->buffer.length;
+ *gtf_address = (unsigned long)out_obj->buffer.pointer;
+ err = 0;
+out:
+ return err;
+}
+EXPORT_SYMBOL_GPL(do_drive_get_GTF);
+
+/**
+ * taskfile_load_raw - send taskfile registers to host controller
+ * @ap: Port to which output is sent
+ * @gtf: raw ATA taskfile register set (0x1f1 - 0x1f7)
+ *
+ * Outputs ATA taskfile to standard ATA host controller using MMIO
+ * or PIO as indicated by the ATA_FLAG_MMIO flag.
+ * Writes the control, feature, nsect, lbal, lbam, and lbah registers.
+ * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect,
+ * hob_lbal, hob_lbam, and hob_lbah.
+ *
+ * This function waits for idle (!BUSY and !DRQ) after writing
+ * registers. If the control register has a new value, this
+ * function also waits for idle after writing control and before
+ * writing the remaining registers.
+ *
+ * LOCKING: TBD:
+ * Inherited from caller.
+ */
+static void taskfile_load_raw(struct ata_port *ap,
+ struct ata_device *atadev,
+ const struct taskfile_array *gtf)
+{
+ if (ata_msg_probe(ap))
+ printk(KERN_DEBUG "%s: (0x1f1-1f7): hex: "
+ "%02x %02x %02x %02x %02x %02x %02x\n",
+ __FUNCTION__,
+ gtf->tfa[0], gtf->tfa[1], gtf->tfa[2],
+ gtf->tfa[3], gtf->tfa[4], gtf->tfa[5], gtf->tfa[6]);
+
+ if (ap->ops->qc_issue) {
+ struct ata_taskfile tf;
+ unsigned int err;
+
+ ata_tf_init(ap, &tf, atadev->devno);
+
+ /* convert gtf to tf */
+ tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; /* TBD */
+ tf.protocol = atadev->class == ATA_DEV_ATAPI ?
+ ATA_PROT_ATAPI_NODATA : ATA_PROT_NODATA;
+ tf.feature = gtf->tfa[0]; /* 0x1f1 */
+ tf.nsect = gtf->tfa[1]; /* 0x1f2 */
+ tf.lbal = gtf->tfa[2]; /* 0x1f3 */
+ tf.lbam = gtf->tfa[3]; /* 0x1f4 */
+ tf.lbah = gtf->tfa[4]; /* 0x1f5 */
+ tf.device = gtf->tfa[5]; /* 0x1f6 */
+ tf.command = gtf->tfa[6]; /* 0x1f7 */
+
+ if (ata_msg_probe(ap))
+ printk(KERN_DEBUG "call ata_exec_internal:\n");
+ err = ata_exec_internal(ap, atadev, &tf, DMA_NONE, NULL, 0);
+ if (err && ata_msg_probe(ap))
+ printk(KERN_ERR "%s: ata_exec_internal failed: %u\n",
+ __FUNCTION__, err);
+ } else
+ if (ata_msg_warn(ap))
+ printk(KERN_WARNING
+ "%s: SATA driver is missing qc_issue function entry points\n",
+ __FUNCTION__);
+}
+
+/**
+ * do_drive_set_taskfiles - write the drive taskfile settings from _GTF
+ * @ap: the ata_port for the drive
+ * @atadev: target ata_device
+ * @gtf_length: total number of bytes of _GTF taskfiles
+ * @gtf_address: location of _GTF taskfile arrays
+ *
+ * This applies to both PATA and SATA drives.
+ *
+ * Write {gtf_address, length gtf_length} in groups of
+ * REGS_PER_GTF bytes.
+ */
+int do_drive_set_taskfiles(struct ata_port *ap, struct ata_device *atadev,
+ unsigned int gtf_length, unsigned long gtf_address)
+{
+ int err = -ENODEV;
+ int gtf_count = gtf_length / REGS_PER_GTF;
+ int ix;
+ struct taskfile_array *gtf;
+
+ if (ata_msg_probe(ap))
+ printk(KERN_DEBUG
+ "%s: ENTER: ap->id: %d, port#: %d, hard_port#: %d\n",
+ __FUNCTION__, ap->id,
+ ap->port_no, ap->hard_port_no);
+
+ if (noacpi)
+ return 0;
+
+ if (!ata_dev_present(atadev) ||
+ (ap->flags & ATA_FLAG_PORT_DISABLED))
+ goto out;
+ if (!gtf_count) /* shouldn't be here */
+ goto out;
+
+ if (ata_msg_probe(ap))
+ printk(KERN_DEBUG
+ "%s: total GTF bytes = %u (0x%x), gtf_count = %d\n",
+ __FUNCTION__, gtf_length, gtf_length, gtf_count);
+ if (gtf_length % REGS_PER_GTF) {
+ if (ata_msg_drv(ap))
+ printk(KERN_ERR "%s: unexpected GTF length (%d)\n",
+ __FUNCTION__, gtf_length);
+ goto out;
+ }
+
+ for (ix = 0; ix < gtf_count; ix++) {
+ gtf = (struct taskfile_array *)
+ (gtf_address + ix * REGS_PER_GTF);
+
+ /* send all TaskFile registers (0x1f1-0x1f7) *in*that*order* */
+ taskfile_load_raw(ap, atadev, gtf);
+ }
+
+ err = 0;
+out:
+ return err;
+}
+EXPORT_SYMBOL_GPL(do_drive_set_taskfiles);
+
+/**
+ * ata_acpi_exec_tfs - get then write drive taskfile settings
+ * @ap: the ata_port for the drive
+ *
+ * This applies to both PATA and SATA drives.
+ */
+int ata_acpi_exec_tfs(struct ata_port *ap)
+{
+ int ix;
+ int ret;
+ unsigned int gtf_length;
+ unsigned long gtf_address;
+
+ if (ata_msg_probe(ap))
+ printk(KERN_DEBUG "%s: ENTER:\n", __FUNCTION__);
+
+ if (noacpi)
+ return 0;
+
+ for (ix = 0; ix < ATA_MAX_DEVICES; ix++) {
+ printk(KERN_DEBUG "%s: call get_GTF, ix=%d\n",
+ __FUNCTION__, ix);
+ ret = do_drive_get_GTF(ap, &ap->device[ix],
+ >f_length, >f_address);
+ if (ret < 0) {
+ if (ata_msg_probe(ap))
+ printk(KERN_DEBUG "%s: get_GTF error (%d)\n",
+ __FUNCTION__, ret);
+ break;
+ }
+
+ printk(KERN_DEBUG "%s: call set_taskfiles, ix=%d\n",
+ __FUNCTION__, ix);
+ ret = do_drive_set_taskfiles(ap, &ap->device[ix],
+ gtf_length, gtf_address);
+ acpi_os_free((void *)gtf_address);
+ if (ret < 0) {
+ if (ata_msg_probe(ap))
+ printk(KERN_DEBUG
+ "%s: set_taskfiles error (%d)\n",
+ __FUNCTION__, ret);
+ break;
+ }
+ }
+
+ if (ata_msg_probe(ap))
+ printk(KERN_DEBUG "%s: ret=%d\n", __FUNCTION__, ret);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ata_acpi_exec_tfs);
--- linux-2615-g9.orig/drivers/scsi/libata-core.c
+++ linux-2615-g9/drivers/scsi/libata-core.c
@@ -82,6 +82,14 @@ int atapi_enabled = 0;
module_param(atapi_enabled, int, 0444);
MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
+int noacpi = 0;
+module_param(noacpi, int, 0444);
+MODULE_PARM_DESC(noacpi, "Disables use of ACPI in suspend/resume when set");
+
+int libata_printk = ATA_MSG_DRV;
+module_param_named(printk, libata_printk, int, 0644);
+MODULE_PARM_DESC(printk, "Set libata printk flags"); /* in linux/libata.h */
+
MODULE_AUTHOR("Jeff Garzik");
MODULE_DESCRIPTION("Library module for ATA devices");
MODULE_LICENSE("GPL");
@@ -1104,7 +1112,7 @@ int ata_qc_complete_internal(struct ata_
* None. Should be called with kernel context, might sleep.
*/
-static unsigned
+unsigned int
ata_exec_internal(struct ata_port *ap, struct ata_device *dev,
struct ata_taskfile *tf,
int dma_dir, void *buf, unsigned int buflen)
@@ -1420,6 +1428,8 @@ void ata_dev_config(struct ata_port *ap,
if (ap->ops->dev_config)
ap->ops->dev_config(ap, &ap->device[i]);
+
+ ata_acpi_push_id(ap, i);
}
/**
@@ -1460,6 +1470,8 @@ static int ata_bus_probe(struct ata_port
if (ap->flags & ATA_FLAG_PORT_DISABLED)
goto err_out_disable;
+ ata_acpi_exec_tfs(ap);
+
return 0;
err_out_disable:
@@ -4238,6 +4250,7 @@ int ata_device_resume(struct ata_port *a
}
if (!ata_dev_present(dev))
return 0;
+ ata_acpi_exec_tfs(ap);
if (dev->class == ATA_DEV_ATA)
ata_start_drive(ap, dev);
@@ -4487,6 +4500,8 @@ int ata_device_add(const struct ata_prob
(ap->mwdma_mask << ATA_SHIFT_MWDMA) |
(ap->pio_mask << ATA_SHIFT_PIO);
+ ap->msg_enable = libata_printk;
+
/* print per-port info to dmesg */
printk(KERN_INFO "ata%u: %cATA max %s cmd 0x%lX ctl 0x%lX "
"bmdma 0x%lX irq %lu\n",
--- linux-2615-g9.orig/drivers/scsi/libata.h
+++ linux-2615-g9/drivers/scsi/libata.h
@@ -41,6 +41,8 @@ struct ata_scsi_args {
/* libata-core.c */
extern int atapi_enabled;
+extern int noacpi;
+extern int libata_printk;
extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
struct ata_device *dev);
extern int ata_rwcmd_protocol(struct ata_queued_cmd *qc);
@@ -52,6 +54,42 @@ extern void ata_dev_select(struct ata_po
extern void swap_buf_le16(u16 *buf, unsigned int buf_words);
extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg);
extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg);
+extern unsigned int ata_exec_internal(struct ata_port *ap,
+ struct ata_device *dev,
+ struct ata_taskfile *tf,
+ int dma_dir, void *buf, unsigned int buflen);
+
+
+/* libata-acpi.c */
+#ifdef CONFIG_SCSI_SATA_ACPI
+extern int ata_acpi_push_id(struct ata_port *ap, unsigned int ix);
+extern int do_drive_get_GTF(struct ata_port *ap, struct ata_device *atadev,
+ unsigned int *gtf_length, unsigned long *gtf_address);
+extern int do_drive_set_taskfiles(struct ata_port *ap, struct ata_device *atadev,
+ unsigned int gtf_length, unsigned long gtf_address);
+extern int ata_acpi_exec_tfs(struct ata_port *ap);
+#else
+static inline int ata_acpi_push_id(struct ata_port *ap, unsigned int ix)
+{
+ return 0;
+}
+static inline int do_drive_get_GTF(struct ata_port *ap,
+ struct ata_device *atadev,
+ unsigned int *gtf_length, unsigned long *gtf_address)
+{
+ return 0;
+}
+static inline int do_drive_set_taskfiles(struct ata_port *ap,
+ struct ata_device *atadev,
+ unsigned int gtf_length, unsigned long gtf_address)
+{
+ return 0;
+}
+static inline int ata_acpi_exec_tfs(struct ata_port *ap)
+{
+ return 0;
+}
+#endif
/* libata-scsi.c */
--- linux-2615-g9.orig/Documentation/kernel-parameters.txt
+++ linux-2615-g9/Documentation/kernel-parameters.txt
@@ -41,6 +41,7 @@ restrictions referred to are that the re
ISAPNP ISA PnP code is enabled.
ISDN Appropriate ISDN support is enabled.
JOY Appropriate joystick support is enabled.
+ LIBATA libata driver is enabled.
LP Printer support is enabled.
LOOP Loopback device support is enabled.
M68k M68k architecture is enabled.
@@ -242,6 +243,9 @@ running once the system is up.
ataflop= [HW,M68k]
+ atapi_enabled= [LIBATA] Enable discovery & support of ATAPI devices
+ Format: <value> (0=off, 1=on)
+
atarimouse= [HW,MOUSE] Atari Mouse
atascsi= [HW,SCSI] Atari SCSI
@@ -968,6 +972,10 @@ running once the system is up.
emulation library even if a 387 maths coprocessor
is present.
+ noacpi= [LIBATA] Disables use of ACPI in libata suspend/resume
+ when set.
+ Format: <int>
+
noalign [KNL,ARM]
noapic [SMP,APIC] Tells the kernel to not make use of any
@@ -1212,6 +1220,11 @@ running once the system is up.
autoconfiguration.
Ranges are in pairs (memory base and size).
+ printk= [LIBATA] Set libata printk level (mask).
+ The values are defined in include/linux/libata.h.
+ The default value is 1 (ATA_MSG_DRV).
+ Format: <int>
+
profile= [KNL] Enable kernel profiling via /proc/profile
Format: [schedule,]<number>
Param: "schedule" - profile schedule points.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
