Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git
to receive the following updates:
drivers/net/bonding/bond_alb.c | 4
drivers/net/bonding/bonding.h | 4
drivers/net/e100.c | 32 +++++
drivers/net/gianfar.c | 6 -
drivers/net/gianfar_mii.c | 5
drivers/net/phy/mdio_bus.c | 2
drivers/net/phy/phy.c | 2
drivers/net/tulip/uli526x.c | 6 -
drivers/net/via-velocity.c | 2
drivers/net/wireless/Kconfig | 2
drivers/net/wireless/atmel.c | 227 ++++++++++++++++++++++++++++++++++++++++-
include/linux/fsl_devices.h | 6 -
include/linux/phy.h | 3
include/net/ieee80211.h | 6 -
14 files changed, 281 insertions(+), 26 deletions(-)
Dan Williams:
wireless/atmel: add IWENCODEEXT, IWAUTH, and association event support
dann frazier:
CONFIG_AIRO needs CONFIG_CRYPTO
Eric Sesterhenn / snakebyte:
replace MODULE_PARM in tulip/uli526x.c
Jay Vosburgh:
bonding: UPDATED hash-table corruption in bond_alb.c
Johannes Berg:
fix wrong comments in ieee80211.h
John W. Linville:
via-velocity: use NETIF_F_IP_CSUM (hardware only support IPv4)
Kumar Gala:
gfar: fix compile error
gianfar mii: Use proper resource for MII memory region
phy: Added a macro to represent the string format used to match a phy device
gianfar: Use new PHY_ID_FMT macro
ODonnell, Michael:
corruption during e100 MDI register access
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 854ddfb..f2a6318 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -169,9 +169,9 @@ static void tlb_clear_slave(struct bondi
index = next_index;
}
- _unlock_tx_hashtbl(bond);
-
tlb_init_slave(slave);
+
+ _unlock_tx_hashtbl(bond);
}
/* Must be called before starting the monitor timer */
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index f20bb85..3dd78d0 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -22,8 +22,8 @@
#include "bond_3ad.h"
#include "bond_alb.h"
-#define DRV_VERSION "3.0.0"
-#define DRV_RELDATE "November 8, 2005"
+#define DRV_VERSION "3.0.1"
+#define DRV_RELDATE "January 9, 2006"
#define DRV_NAME "bonding"
#define DRV_DESCRIPTION "Ethernet Channel Bonding Driver"
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 22cd045..23de226 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -132,6 +132,10 @@
* TODO:
* o several entry points race with dev->close
* o check for tx-no-resources/stop Q races with tx clean/wake Q
+ *
+ * FIXES:
+ * 2005/12/02 - Michael O'Donnell <Michael.ODonnell at stratus dot com>
+ * - Stratus87247: protect MDI control register manipulations
*/
#include <linux/config.h>
@@ -578,6 +582,7 @@ struct nic {
u16 leds;
u16 eeprom_wc;
u16 eeprom[256];
+ spinlock_t mdio_lock;
};
static inline void e100_write_flush(struct nic *nic)
@@ -876,15 +881,35 @@ static u16 mdio_ctrl(struct nic *nic, u3
{
u32 data_out = 0;
unsigned int i;
+ unsigned long flags;
+
+ /*
+ * Stratus87247: we shouldn't be writing the MDI control
+ * register until the Ready bit shows True. Also, since
+ * manipulation of the MDI control registers is a multi-step
+ * procedure it should be done under lock.
+ */
+ spin_lock_irqsave(&nic->mdio_lock, flags);
+ for (i = 100; i; --i) {
+ if (readl(&nic->csr->mdi_ctrl) & mdi_ready)
+ break;
+ udelay(20);
+ }
+ if (unlikely(!i)) {
+ printk("e100.mdio_ctrl(%s) won't go Ready\n",
+ nic->netdev->name );
+ spin_unlock_irqrestore(&nic->mdio_lock, flags);
+ return 0; /* No way to indicate timeout error */
+ }
writel((reg << 16) | (addr << 21) | dir | data, &nic->csr->mdi_ctrl);
- for(i = 0; i < 100; i++) {
+ for (i = 0; i < 100; i++) {
udelay(20);
- if((data_out = readl(&nic->csr->mdi_ctrl)) & mdi_ready)
+ if ((data_out = readl(&nic->csr->mdi_ctrl)) & mdi_ready)
break;
}
-
+ spin_unlock_irqrestore(&nic->mdio_lock, flags);
DPRINTK(HW, DEBUG,
"%s:addr=%d, reg=%d, data_in=0x%04X, data_out=0x%04X\n",
dir == mdi_read ? "READ" : "WRITE", addr, reg, data, data_out);
@@ -2562,6 +2587,7 @@ static int __devinit e100_probe(struct p
/* locks must be initialized before calling hw_reset */
spin_lock_init(&nic->cb_lock);
spin_lock_init(&nic->cmd_lock);
+ spin_lock_init(&nic->mdio_lock);
/* Reset the device before pci_set_master() in case device is in some
* funky state and has an interrupt pending - hint: we don't have the
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 146f951..0c18dbd 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -84,6 +84,7 @@
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/udp.h>
+#include <linux/in.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -398,12 +399,15 @@ static int init_phy(struct net_device *d
priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ?
SUPPORTED_1000baseT_Full : 0;
struct phy_device *phydev;
+ char phy_id[BUS_ID_SIZE];
priv->oldlink = 0;
priv->oldspeed = 0;
priv->oldduplex = -1;
- phydev = phy_connect(dev, priv->einfo->bus_id, &adjust_link, 0);
+ snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, priv->einfo->bus_id, priv->einfo->phy_id);
+
+ phydev = phy_connect(dev, phy_id, &adjust_link, 0);
if (IS_ERR(phydev)) {
printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c
index 04a462c..74e52fc 100644
--- a/drivers/net/gianfar_mii.c
+++ b/drivers/net/gianfar_mii.c
@@ -128,6 +128,7 @@ int gfar_mdio_probe(struct device *dev)
struct gianfar_mdio_data *pdata;
struct gfar_mii *regs;
struct mii_bus *new_bus;
+ struct resource *r;
int err = 0;
if (NULL == dev)
@@ -151,8 +152,10 @@ int gfar_mdio_probe(struct device *dev)
return -ENODEV;
}
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
/* Set the PHY base address */
- regs = (struct gfar_mii *) ioremap(pdata->paddr,
+ regs = (struct gfar_mii *) ioremap(r->start,
sizeof (struct gfar_mii));
if (NULL == regs) {
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 02940c0..459443b 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -81,7 +81,7 @@ int mdiobus_register(struct mii_bus *bus
phydev->dev.parent = bus->dev;
phydev->dev.bus = &mdio_bus_type;
- sprintf(phydev->dev.bus_id, "phy%d:%d", bus->id, i);
+ snprintf(phydev->dev.bus_id, BUS_ID_SIZE, PHY_ID_FMT, bus->id, i);
phydev->bus = bus;
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index b8686e4..1474b7c 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -42,7 +42,7 @@
*/
void phy_print_status(struct phy_device *phydev)
{
- pr_info("%s: Link is %s", phydev->dev.bus_id,
+ pr_info("PHY: %s - Link is %s", phydev->dev.bus_id,
phydev->link ? "Up" : "Down");
if (phydev->link)
printk(" - %d/%s", phydev->speed,
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index 1a43163..9839816 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -1689,9 +1689,9 @@ MODULE_AUTHOR("Peer Chen, peer.chen@uli.
MODULE_DESCRIPTION("ULi M5261/M5263 fast ethernet driver");
MODULE_LICENSE("GPL");
-MODULE_PARM(debug, "i");
-MODULE_PARM(mode, "i");
-MODULE_PARM(cr6set, "i");
+module_param(debug, int, 0644);
+module_param(mode, int, 0);
+module_param(cr6set, int, 0);
MODULE_PARM_DESC(debug, "ULi M5261/M5263 enable debugging (0-1)");
MODULE_PARM_DESC(mode, "ULi M5261/M5263: Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA");
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 82c6b75..c2d5907 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -791,7 +791,7 @@ static int __devinit velocity_found1(str
#endif
if (vptr->flags & VELOCITY_FLAGS_TX_CSUM) {
- dev->features |= NETIF_F_HW_CSUM;
+ dev->features |= NETIF_F_IP_CSUM;
}
ret = register_netdev(dev);
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 24f7967..c1a6e69 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -243,7 +243,7 @@ config IPW2200_DEBUG
config AIRO
tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
- depends on NET_RADIO && ISA_DMA_API && (PCI || BROKEN)
+ depends on NET_RADIO && ISA_DMA_API && CRYPTO && (PCI || BROKEN)
---help---
This is the standard Linux driver to support Cisco/Aironet ISA and
PCI 802.11 wireless cards.
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index e4729dd..f0ccfef 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -1407,6 +1407,17 @@ static int atmel_close(struct net_device
{
struct atmel_private *priv = netdev_priv(dev);
+ /* Send event to userspace that we are disassociating */
+ if (priv->station_state == STATION_STATE_READY) {
+ union iwreq_data wrqu;
+
+ wrqu.data.length = 0;
+ wrqu.data.flags = 0;
+ wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+ memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN);
+ wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL);
+ }
+
atmel_enter_state(priv, STATION_STATE_DOWN);
if (priv->bus_type == BUS_TYPE_PCCARD)
@@ -1780,10 +1791,10 @@ static int atmel_set_encode(struct net_d
priv->wep_is_on = 1;
priv->exclude_unencrypted = 1;
if (priv->wep_key_len[index] > 5) {
- priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_64;
+ priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_128;
priv->encryption_level = 2;
} else {
- priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_128;
+ priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_64;
priv->encryption_level = 1;
}
}
@@ -1853,6 +1864,181 @@ static int atmel_get_encode(struct net_d
return 0;
}
+static int atmel_set_encodeext(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+ struct iw_point *encoding = &wrqu->encoding;
+ struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+ int idx, key_len;
+
+ /* Determine and validate the key index */
+ idx = encoding->flags & IW_ENCODE_INDEX;
+ if (idx) {
+ if (idx < 1 || idx > WEP_KEYS)
+ return -EINVAL;
+ idx--;
+ } else
+ idx = priv->default_key;
+
+ if ((encoding->flags & IW_ENCODE_DISABLED) ||
+ ext->alg == IW_ENCODE_ALG_NONE) {
+ priv->wep_is_on = 0;
+ priv->encryption_level = 0;
+ priv->pairwise_cipher_suite = CIPHER_SUITE_NONE;
+ }
+
+ if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)
+ priv->default_key = idx;
+
+ /* Set the requested key */
+ switch (ext->alg) {
+ case IW_ENCODE_ALG_NONE:
+ break;
+ case IW_ENCODE_ALG_WEP:
+ if (ext->key_len > 5) {
+ priv->wep_key_len[idx] = 13;
+ priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_128;
+ priv->encryption_level = 2;
+ } else if (ext->key_len > 0) {
+ priv->wep_key_len[idx] = 5;
+ priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_64;
+ priv->encryption_level = 1;
+ } else {
+ return -EINVAL;
+ }
+ priv->wep_is_on = 1;
+ memset(priv->wep_keys[idx], 0, 13);
+ key_len = min ((int)ext->key_len, priv->wep_key_len[idx]);
+ memcpy(priv->wep_keys[idx], ext->key, key_len);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return -EINPROGRESS;
+}
+
+static int atmel_get_encodeext(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+ struct iw_point *encoding = &wrqu->encoding;
+ struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+ int idx, max_key_len;
+
+ max_key_len = encoding->length - sizeof(*ext);
+ if (max_key_len < 0)
+ return -EINVAL;
+
+ idx = encoding->flags & IW_ENCODE_INDEX;
+ if (idx) {
+ if (idx < 1 || idx > WEP_KEYS)
+ return -EINVAL;
+ idx--;
+ } else
+ idx = priv->default_key;
+
+ encoding->flags = idx + 1;
+ memset(ext, 0, sizeof(*ext));
+
+ if (!priv->wep_is_on) {
+ ext->alg = IW_ENCODE_ALG_NONE;
+ ext->key_len = 0;
+ encoding->flags |= IW_ENCODE_DISABLED;
+ } else {
+ if (priv->encryption_level > 0)
+ ext->alg = IW_ENCODE_ALG_WEP;
+ else
+ return -EINVAL;
+
+ ext->key_len = priv->wep_key_len[idx];
+ memcpy(ext->key, priv->wep_keys[idx], ext->key_len);
+ encoding->flags |= IW_ENCODE_ENABLED;
+ }
+
+ return 0;
+}
+
+static int atmel_set_auth(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+ struct iw_param *param = &wrqu->param;
+
+ switch (param->flags & IW_AUTH_INDEX) {
+ case IW_AUTH_WPA_VERSION:
+ case IW_AUTH_CIPHER_PAIRWISE:
+ case IW_AUTH_CIPHER_GROUP:
+ case IW_AUTH_KEY_MGMT:
+ case IW_AUTH_RX_UNENCRYPTED_EAPOL:
+ case IW_AUTH_PRIVACY_INVOKED:
+ /*
+ * atmel does not use these parameters
+ */
+ break;
+
+ case IW_AUTH_DROP_UNENCRYPTED:
+ priv->exclude_unencrypted = param->value ? 1 : 0;
+ break;
+
+ case IW_AUTH_80211_AUTH_ALG: {
+ if (param->value & IW_AUTH_ALG_SHARED_KEY) {
+ priv->exclude_unencrypted = 1;
+ } else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) {
+ priv->exclude_unencrypted = 0;
+ } else
+ return -EINVAL;
+ break;
+ }
+
+ case IW_AUTH_WPA_ENABLED:
+ /* Silently accept disable of WPA */
+ if (param->value > 0)
+ return -EOPNOTSUPP;
+ break;
+
+ default:
+ return -EOPNOTSUPP;
+ }
+ return -EINPROGRESS;
+}
+
+static int atmel_get_auth(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+ struct iw_param *param = &wrqu->param;
+
+ switch (param->flags & IW_AUTH_INDEX) {
+ case IW_AUTH_DROP_UNENCRYPTED:
+ param->value = priv->exclude_unencrypted;
+ break;
+
+ case IW_AUTH_80211_AUTH_ALG:
+ if (priv->exclude_unencrypted == 1)
+ param->value = IW_AUTH_ALG_SHARED_KEY;
+ else
+ param->value = IW_AUTH_ALG_OPEN_SYSTEM;
+ break;
+
+ case IW_AUTH_WPA_ENABLED:
+ param->value = 0;
+ break;
+
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
+
+
static int atmel_get_name(struct net_device *dev,
struct iw_request_info *info,
char *cwrq,
@@ -2289,13 +2475,15 @@ static int atmel_set_wap(struct net_devi
{
struct atmel_private *priv = netdev_priv(dev);
int i;
- static const u8 bcast[] = { 255, 255, 255, 255, 255, 255 };
+ static const u8 any[] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
+ static const u8 off[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
unsigned long flags;
if (awrq->sa_family != ARPHRD_ETHER)
return -EINVAL;
- if (memcmp(bcast, awrq->sa_data, 6) == 0) {
+ if (!memcmp(any, awrq->sa_data, 6) ||
+ !memcmp(off, awrq->sa_data, 6)) {
del_timer_sync(&priv->management_timer);
spin_lock_irqsave(&priv->irqlock, flags);
atmel_scan(priv, 1);
@@ -2378,6 +2566,15 @@ static const iw_handler atmel_handler[]
(iw_handler) atmel_get_encode, /* SIOCGIWENCODE */
(iw_handler) atmel_set_power, /* SIOCSIWPOWER */
(iw_handler) atmel_get_power, /* SIOCGIWPOWER */
+ (iw_handler) NULL, /* -- hole -- */
+ (iw_handler) NULL, /* -- hole -- */
+ (iw_handler) NULL, /* SIOCSIWGENIE */
+ (iw_handler) NULL, /* SIOCGIWGENIE */
+ (iw_handler) atmel_set_auth, /* SIOCSIWAUTH */
+ (iw_handler) atmel_get_auth, /* SIOCGIWAUTH */
+ (iw_handler) atmel_set_encodeext, /* SIOCSIWENCODEEXT */
+ (iw_handler) atmel_get_encodeext, /* SIOCGIWENCODEEXT */
+ (iw_handler) NULL, /* SIOCSIWPMKSA */
};
static const iw_handler atmel_private_handler[] =
@@ -2924,6 +3121,8 @@ static void associate(struct atmel_priva
u16 ass_id = le16_to_cpu(ass_resp->ass_id);
u16 rates_len = ass_resp->length > 4 ? 4 : ass_resp->length;
+ union iwreq_data wrqu;
+
if (frame_len < 8 + rates_len)
return;
@@ -2954,6 +3153,14 @@ static void associate(struct atmel_priva
priv->station_is_associated = 1;
priv->station_was_associated = 1;
atmel_enter_state(priv, STATION_STATE_READY);
+
+ /* Send association event to userspace */
+ wrqu.data.length = 0;
+ wrqu.data.flags = 0;
+ memcpy(wrqu.ap_addr.sa_data, priv->CurrentBSSID, ETH_ALEN);
+ wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+ wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL);
+
return;
}
@@ -3632,6 +3839,7 @@ static int reset_atmel_card(struct net_d
struct atmel_private *priv = netdev_priv(dev);
u8 configuration;
+ int old_state = priv->station_state;
/* data to add to the firmware names, in priority order
this implemenents firmware versioning */
@@ -3792,6 +4000,17 @@ static int reset_atmel_card(struct net_d
else
build_wep_mib(priv);
+ if (old_state == STATION_STATE_READY)
+ {
+ union iwreq_data wrqu;
+
+ wrqu.data.length = 0;
+ wrqu.data.flags = 0;
+ wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+ memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN);
+ wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL);
+ }
+
return 1;
}
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index 934aa9b..a9f1cfd 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -50,14 +50,12 @@ struct gianfar_platform_data {
/* board specific information */
u32 board_flags;
- const char *bus_id;
+ u32 bus_id;
+ u32 phy_id;
u8 mac_addr[6];
};
struct gianfar_mdio_data {
- /* device specific information */
- u32 paddr;
-
/* board specific information */
int irq[32];
};
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 92a9696..331521a 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -53,6 +53,9 @@
#define PHY_MAX_ADDR 32
+/* Used when trying to connect to a specific phy (mii bus id:phy device id) */
+#define PHY_ID_FMT "%x:%02x"
+
/* The Bus class for PHYs. Devices which provide access to
* PHYs should register using this structure */
struct mii_bus {
diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h
index cde2f4f..df05f46 100644
--- a/include/net/ieee80211.h
+++ b/include/net/ieee80211.h
@@ -363,8 +363,9 @@ enum ieee80211_reasoncode {
#define IEEE80211_OFDM_SHIFT_MASK_A 4
/* NOTE: This data is for statistical purposes; not all hardware provides this
- * information for frames received. Not setting these will not cause
- * any adverse affects. */
+ * information for frames received.
+ * For ieee80211_rx_mgt, you need to set at least the 'len' parameter.
+ */
struct ieee80211_rx_stats {
u32 mac_time;
s8 rssi;
@@ -1088,6 +1089,7 @@ extern int ieee80211_tx_frame(struct iee
/* ieee80211_rx.c */
extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
struct ieee80211_rx_stats *rx_stats);
+/* make sure to set stats->len */
extern void ieee80211_rx_mgt(struct ieee80211_device *ieee,
struct ieee80211_hdr_4addr *header,
struct ieee80211_rx_stats *stats);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
