I am seeing EQ overruns in SDP stress tests: if the CQ completion
handler arms a CQ, this could generate more EQEs, so that EQ will
never get empty and consumer index will never get updated.
This is similiar to what we have with command interface:
/*
* cmd_event() may add more commands.
* The card will think the queue has overflowed if
* we don't tell it we've been processing events.
*/
However, for completion events, we *don't* want to update the consumer
index on each event. So, perform EQ doorbell coalescing: allocate EQs
with some spare EQEs, and update once we run out of them.
The value 0x80 was selected to avoid any performance impact.
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Roland Dreier <[email protected]>
---
drivers/infiniband/hw/mthca/mthca_eq.c | 28 +++++++++++++++-------------
1 files changed, 15 insertions(+), 13 deletions(-)
92898522e3ee1a0ba54140aad1974d9e868f74ae
diff --git a/drivers/infiniband/hw/mthca/mthca_eq.c b/drivers/infiniband/hw/mthca/mthca_eq.c
index e8a948f..2eabb27 100644
--- a/drivers/infiniband/hw/mthca/mthca_eq.c
+++ b/drivers/infiniband/hw/mthca/mthca_eq.c
@@ -45,6 +45,7 @@
enum {
MTHCA_NUM_ASYNC_EQE = 0x80,
MTHCA_NUM_CMD_EQE = 0x80,
+ MTHCA_NUM_SPARE_EQE = 0x80,
MTHCA_EQ_ENTRY_SIZE = 0x20
};
@@ -277,11 +278,10 @@ static int mthca_eq_int(struct mthca_dev
{
struct mthca_eqe *eqe;
int disarm_cqn;
- int eqes_found = 0;
+ int eqes_found = 0;
+ int set_ci = 0;
while ((eqe = next_eqe_sw(eq))) {
- int set_ci = 0;
-
/*
* Make sure we read EQ entry contents after we've
* checked the ownership bit.
@@ -345,12 +345,6 @@ static int mthca_eq_int(struct mthca_dev
be16_to_cpu(eqe->event.cmd.token),
eqe->event.cmd.status,
be64_to_cpu(eqe->event.cmd.out_param));
- /*
- * cmd_event() may add more commands.
- * The card will think the queue has overflowed if
- * we don't tell it we've been processing events.
- */
- set_ci = 1;
break;
case MTHCA_EVENT_TYPE_PORT_CHANGE:
@@ -385,8 +379,16 @@ static int mthca_eq_int(struct mthca_dev
set_eqe_hw(eqe);
++eq->cons_index;
eqes_found = 1;
+ ++set_ci;
- if (unlikely(set_ci)) {
+ /*
+ * The HCA will think the queue has overflowed if we
+ * don't tell it we've been processing events. We
+ * create our EQs with MTHCA_NUM_SPARE_EQE extra
+ * entries, so we must update our consumer index at
+ * least that often.
+ */
+ if (unlikely(set_ci >= MTHCA_NUM_SPARE_EQE)) {
/*
* Conditional on hca_type is OK here because
* this is a rare case, not the fast path.
@@ -862,19 +864,19 @@ int __devinit mthca_init_eq_table(struct
intr = (dev->mthca_flags & MTHCA_FLAG_MSI) ?
128 : dev->eq_table.inta_pin;
- err = mthca_create_eq(dev, dev->limits.num_cqs,
+ err = mthca_create_eq(dev, dev->limits.num_cqs + MTHCA_NUM_SPARE_EQE,
(dev->mthca_flags & MTHCA_FLAG_MSI_X) ? 128 : intr,
&dev->eq_table.eq[MTHCA_EQ_COMP]);
if (err)
goto err_out_unmap;
- err = mthca_create_eq(dev, MTHCA_NUM_ASYNC_EQE,
+ err = mthca_create_eq(dev, MTHCA_NUM_ASYNC_EQE + MTHCA_NUM_SPARE_EQE,
(dev->mthca_flags & MTHCA_FLAG_MSI_X) ? 129 : intr,
&dev->eq_table.eq[MTHCA_EQ_ASYNC]);
if (err)
goto err_out_comp;
- err = mthca_create_eq(dev, MTHCA_NUM_CMD_EQE,
+ err = mthca_create_eq(dev, MTHCA_NUM_CMD_EQE + MTHCA_NUM_SPARE_EQE,
(dev->mthca_flags & MTHCA_FLAG_MSI_X) ? 130 : intr,
&dev->eq_table.eq[MTHCA_EQ_CMD]);
if (err)
--
1.0.7
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]