From: Hans Verkuil <[email protected]>
- Split msp3400.c into msp3400-driver.c and msp3400-kthreads.c.
- Removed experimental DFPREG ioctls. If this is really needed one
day then it should be implemented using VIDIOC_G/S_REGISTER.
- Added missing BALANCE control info for VIDIOC_QUERYCTRL.
- Still more cleanup, clarified some kernel messages.
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
---
drivers/media/video/Makefile | 2
drivers/media/video/msp3400-driver.c | 1144 +++++++++++++++++
drivers/media/video/msp3400.c | 2289 ----------------------------------
drivers/media/video/msp3400.h | 127 ++
4 files changed, 1266 insertions(+), 2296 deletions(-)
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 49aae8a..dd24896 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -10,6 +10,8 @@ zr36067-objs := zoran_procfs.o zoran_dev
zoran_driver.o zoran_card.o
tuner-objs := tuner-core.o tuner-simple.o mt20xx.o tda8290.o tea5767.o
+msp3400-objs := msp3400-driver.o msp3400-kthreads.o
+
obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o v4l1-compat.o compat_ioctl32.o
obj-$(CONFIG_VIDEO_BT848) += bttv.o msp3400.o tvaudio.o \
diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c
new file mode 100644
index 0000000..de79c64
--- /dev/null
+++ b/drivers/media/video/msp3400-driver.c
@@ -0,0 +1,1144 @@
+/*
+ * Programming the mspx4xx sound processor family
+ *
+ * (c) 1997-2001 Gerd Knorr <[email protected]>
+ *
+ * what works and what doesn't:
+ *
+ * AM-Mono
+ * Support for Hauppauge cards added (decoding handled by tuner) added by
+ * Frederic Crozat <[email protected]>
+ *
+ * FM-Mono
+ * should work. The stereo modes are backward compatible to FM-mono,
+ * therefore FM-Mono should be allways available.
+ *
+ * FM-Stereo (B/G, used in germany)
+ * should work, with autodetect
+ *
+ * FM-Stereo (satellite)
+ * should work, no autodetect (i.e. default is mono, but you can
+ * switch to stereo -- untested)
+ *
+ * NICAM (B/G, L , used in UK, Scandinavia, Spain and France)
+ * should work, with autodetect. Support for NICAM was added by
+ * Pekka Pietikainen <[email protected]>
+ *
+ * TODO:
+ * - better SAT support
+ *
+ * 980623 Thomas Sailer ([email protected])
+ * using soundcore instead of OSS
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/videodev.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+#include <media/audiochip.h>
+#include <linux/kthread.h>
+#include <linux/suspend.h>
+#include "msp3400.h"
+
+/* ---------------------------------------------------------------------- */
+
+MODULE_DESCRIPTION("device driver for msp34xx TV sound processor");
+MODULE_AUTHOR("Gerd Knorr");
+MODULE_LICENSE("GPL");
+
+/* module parameters */
+static int opmode = OPMODE_AUTO;
+int debug = 0; /* debug output */
+int once = 0; /* no continous stereo monitoring */
+int amsound = 0; /* hard-wire AM sound at 6.5 Hz (france),
+ the autoscan seems work well only with FM... */
+int standard = 1; /* Override auto detect of audio standard, if needed. */
+int dolby = 0;
+
+int stereo_threshold = 0x190; /* a2 threshold for stereo/bilingual
+ (msp34xxg only) 0x00a0-0x03c0 */
+
+/* read-only */
+module_param(opmode, int, 0444);
+
+/* read-write */
+module_param(once, int, 0644);
+module_param(debug, int, 0644);
+module_param(stereo_threshold, int, 0644);
+module_param(standard, int, 0644);
+module_param(amsound, int, 0644);
+module_param(dolby, int, 0644);
+
+MODULE_PARM_DESC(opmode, "Forces a MSP3400 opmode. 0=Manual, 1=Autodetect, 2=Autodetect and autoselect");
+MODULE_PARM_DESC(once, "No continuous stereo monitoring");
+MODULE_PARM_DESC(debug, "Enable debug messages [0-3]");
+MODULE_PARM_DESC(stereo_threshold, "Sets signal threshold to activate stereo");
+MODULE_PARM_DESC(standard, "Specify audio standard: 32 = NTSC, 64 = radio, Default: Autodetect");
+MODULE_PARM_DESC(amsound, "Hardwire AM sound at 6.5Hz (France), FM can autoscan");
+MODULE_PARM_DESC(dolby, "Activates Dolby processsing");
+
+/* ---------------------------------------------------------------------- */
+
+/* control subaddress */
+#define I2C_MSP_CONTROL 0x00
+/* demodulator unit subaddress */
+#define I2C_MSP_DEM 0x10
+/* DSP unit subaddress */
+#define I2C_MSP_DSP 0x12
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x80 >> 1, 0x88 >> 1, I2C_CLIENT_END };
+
+I2C_CLIENT_INSMOD;
+
+
+/* ----------------------------------------------------------------------- */
+/* functions for talking to the MSP3400C Sound processor */
+
+int msp_reset(struct i2c_client *client)
+{
+ /* reset and read revision code */
+ static u8 reset_off[3] = { I2C_MSP_CONTROL, 0x80, 0x00 };
+ static u8 reset_on[3] = { I2C_MSP_CONTROL, 0x00, 0x00 };
+ static u8 write[3] = { I2C_MSP_DSP + 1, 0x00, 0x1e };
+ u8 read[2];
+ struct i2c_msg reset[2] = {
+ { client->addr, I2C_M_IGNORE_NAK, 3, reset_off },
+ { client->addr, I2C_M_IGNORE_NAK, 3, reset_on },
+ };
+ struct i2c_msg test[2] = {
+ { client->addr, 0, 3, write },
+ { client->addr, I2C_M_RD, 2, read },
+ };
+
+ msp_dbg3("msp_reset\n");
+ if (i2c_transfer(client->adapter, &reset[0], 1) != 1 ||
+ i2c_transfer(client->adapter, &reset[1], 1) != 1 ||
+ i2c_transfer(client->adapter, test, 2) != 2) {
+ msp_err("chip reset failed\n");
+ return -1;
+ }
+ return 0;
+}
+
+static int msp_read(struct i2c_client *client, int dev, int addr)
+{
+ int err, retval;
+ u8 write[3];
+ u8 read[2];
+ struct i2c_msg msgs[2] = {
+ { client->addr, 0, 3, write },
+ { client->addr, I2C_M_RD, 2, read }
+ };
+
+ write[0] = dev + 1;
+ write[1] = addr >> 8;
+ write[2] = addr & 0xff;
+
+ for (err = 0; err < 3; err++) {
+ if (i2c_transfer(client->adapter, msgs, 2) == 2)
+ break;
+ msp_warn("I/O error #%d (read 0x%02x/0x%02x)\n", err,
+ dev, addr);
+ current->state = TASK_INTERRUPTIBLE;
+ schedule_timeout(msecs_to_jiffies(10));
+ }
+ if (err == 3) {
+ msp_warn("giving up, resetting chip. Sound will go off, sorry folks :-|\n");
+ msp_reset(client);
+ return -1;
+ }
+ retval = read[0] << 8 | read[1];
+ msp_dbg3("msp_read(0x%x, 0x%x): 0x%x\n", dev, addr, retval);
+ return retval;
+}
+
+int msp_read_dem(struct i2c_client *client, int addr)
+{
+ return msp_read(client, I2C_MSP_DEM, addr);
+}
+
+int msp_read_dsp(struct i2c_client *client, int addr)
+{
+ return msp_read(client, I2C_MSP_DSP, addr);
+}
+
+static int msp_write(struct i2c_client *client, int dev, int addr, int val)
+{
+ int err;
+ u8 buffer[5];
+
+ buffer[0] = dev;
+ buffer[1] = addr >> 8;
+ buffer[2] = addr & 0xff;
+ buffer[3] = val >> 8;
+ buffer[4] = val & 0xff;
+
+ msp_dbg3("msp_write(0x%x, 0x%x, 0x%x)\n", dev, addr, val);
+ for (err = 0; err < 3; err++) {
+ if (i2c_master_send(client, buffer, 5) == 5)
+ break;
+ msp_warn("I/O error #%d (write 0x%02x/0x%02x)\n", err,
+ dev, addr);
+ current->state = TASK_INTERRUPTIBLE;
+ schedule_timeout(msecs_to_jiffies(10));
+ }
+ if (err == 3) {
+ msp_warn("giving up, resetting chip. Sound will go off, sorry folks :-|\n");
+ msp_reset(client);
+ return -1;
+ }
+ return 0;
+}
+
+int msp_write_dem(struct i2c_client *client, int addr, int val)
+{
+ return msp_write(client, I2C_MSP_DEM, addr, val);
+}
+
+int msp_write_dsp(struct i2c_client *client, int addr, int val)
+{
+ return msp_write(client, I2C_MSP_DSP, addr, val);
+}
+
+/* ----------------------------------------------------------------------- *
+ * bits 9 8 5 - SCART DSP input Select:
+ * 0 0 0 - SCART 1 to DSP input (reset position)
+ * 0 1 0 - MONO to DSP input
+ * 1 0 0 - SCART 2 to DSP input
+ * 1 1 1 - Mute DSP input
+ *
+ * bits 11 10 6 - SCART 1 Output Select:
+ * 0 0 0 - undefined (reset position)
+ * 0 1 0 - SCART 2 Input to SCART 1 Output (for devices with 2 SCARTS)
+ * 1 0 0 - MONO input to SCART 1 Output
+ * 1 1 0 - SCART 1 DA to SCART 1 Output
+ * 0 0 1 - SCART 2 DA to SCART 1 Output
+ * 0 1 1 - SCART 1 Input to SCART 1 Output
+ * 1 1 1 - Mute SCART 1 Output
+ *
+ * bits 13 12 7 - SCART 2 Output Select (for devices with 2 Output SCART):
+ * 0 0 0 - SCART 1 DA to SCART 2 Output (reset position)
+ * 0 1 0 - SCART 1 Input to SCART 2 Output
+ * 1 0 0 - MONO input to SCART 2 Output
+ * 0 0 1 - SCART 2 DA to SCART 2 Output
+ * 0 1 1 - SCART 2 Input to SCART 2 Output
+ * 1 1 0 - Mute SCART 2 Output
+ *
+ * Bits 4 to 0 should be zero.
+ * ----------------------------------------------------------------------- */
+
+static int scarts[3][9] = {
+ /* MASK IN1 IN2 IN1_DA IN2_DA IN3 IN4 MONO MUTE */
+ /* SCART DSP Input select */
+ { 0x0320, 0x0000, 0x0200, -1, -1, 0x0300, 0x0020, 0x0100, 0x0320 },
+ /* SCART1 Output select */
+ { 0x0c40, 0x0440, 0x0400, 0x0c00, 0x0040, 0x0000, 0x0840, 0x0800, 0x0c40 },
+ /* SCART2 Output select */
+ { 0x3080, 0x1000, 0x1080, 0x0000, 0x0080, 0x2080, 0x3080, 0x2000, 0x3000 },
+};
+
+static char *scart_names[] = {
+ "mask", "in1", "in2", "in1 da", "in2 da", "in3", "in4", "mono", "mute"
+};
+
+void msp_set_scart(struct i2c_client *client, int in, int out)
+{
+ struct msp_state *state = i2c_get_clientdata(client);
+
+ state->in_scart=in;
+
+ if (in >= 1 && in <= 8 && out >= 0 && out <= 2) {
+ if (-1 == scarts[out][in])
+ return;
+
+ state->acb &= ~scarts[out][SCART_MASK];
+ state->acb |= scarts[out][in];
+ } else
+ state->acb = 0xf60; /* Mute Input and SCART 1 Output */
+
+ msp_dbg1("scart switch: %s => %d (ACB=0x%04x)\n",
+ scart_names[in], out, state->acb);
+ msp_write_dsp(client, 0x13, state->acb);
+
+ /* Sets I2S speed 0 = 1.024 Mbps, 1 = 2.048 Mbps */
+ msp_write_dem(client, 0x40, state->i2s_mode);
+}
+
+void msp_set_mute(struct i2c_client *client)
+{
+ msp_dbg1("mute audio\n");
+ msp_write_dsp(client, 0x0000, 0); /* loudspeaker */
+ msp_write_dsp(client, 0x0006, 0); /* headphones */
+}
+
+void msp_set_audio(struct i2c_client *client)
+{
+ struct msp_state *state = i2c_get_clientdata(client);
+ int val = 0, bal = 0, bass, treble;
+
+ if (!state->muted)
+ val = (state->volume * 0x7f / 65535) << 8;
+ if (val)
+ bal = (state->balance / 256) - 128;
+ bass = ((state->bass - 32768) * 0x60 / 65535) << 8;
+ treble = ((state->treble - 32768) * 0x60 / 65535) << 8;
+
+ msp_dbg1("mute=%s volume=%d balance=%d bass=%d treble=%d\n",
+ state->muted ? "on" : "off", state->volume, state->balance,
+ state->bass, state->treble);
+
+ msp_write_dsp(client, 0x0000, val); /* loudspeaker */
+ msp_write_dsp(client, 0x0006, val); /* headphones */
+ msp_write_dsp(client, 0x0007, state->muted ? 0x1 : (val | 0x1));
+ msp_write_dsp(client, 0x0001, bal << 8);
+ msp_write_dsp(client, 0x0002, bass); /* loudspeaker */
+ msp_write_dsp(client, 0x0003, treble); /* loudspeaker */
+}
+
+int msp_modus(struct i2c_client *client, int norm)
+{
+ switch (norm) {
+ case VIDEO_MODE_PAL:
+ msp_dbg1("video mode selected to PAL\n");
+
+#if 1
+ /* experimental: not sure this works with all chip versions */
+ return 0x7003;
+#else
+ /* previous value, try this if it breaks ... */
+ return 0x1003;
+#endif
+ case VIDEO_MODE_NTSC: /* BTSC */
+ msp_dbg1("video mode selected to NTSC\n");
+ return 0x2003;
+ case VIDEO_MODE_SECAM:
+ msp_dbg1("video mode selected to SECAM\n");
+ return 0x0003;
+ case VIDEO_MODE_RADIO:
+ msp_dbg1("video mode selected to Radio\n");
+ return 0x0003;
+ case VIDEO_MODE_AUTO:
+ msp_dbg1("video mode selected to Auto\n");
+ return 0x2003;
+ default:
+ return 0x0003;
+ }
+}
+
+int msp_standard(int norm)
+{
+ switch (norm) {
+ case VIDEO_MODE_PAL:
+ return 1;
+ case VIDEO_MODE_NTSC: /* BTSC */
+ return 0x0020;
+ case VIDEO_MODE_SECAM:
+ return 1;
+ case VIDEO_MODE_RADIO:
+ return 0x0040;
+ default:
+ return 1;
+ }
+}
+
+/* ------------------------------------------------------------------------ */
+
+
+static void msp_wake_thread(struct i2c_client *client)
+{
+ struct msp_state *state = i2c_get_clientdata(client);
+
+ if (NULL == state->kthread)
+ return;
+ msp_set_mute(client);
+ state->watch_stereo = 0;
+ state->restart = 1;
+ wake_up_interruptible(&state->wq);
+}
+
+int msp_sleep(struct msp_state *state, int timeout)
+{
+ DECLARE_WAITQUEUE(wait, current);
+
+ add_wait_queue(&state->wq, &wait);
+ if (!kthread_should_stop()) {
+ if (timeout < 0) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule();
+ } else {
+ schedule_timeout_interruptible
+ (msecs_to_jiffies(timeout));
+ }
+ }
+
+ remove_wait_queue(&state->wq, &wait);
+ try_to_freeze();
+ return state->restart;
+}
+
+/* ------------------------------------------------------------------------ */
+
+static int msp_mode_v4l2_to_v4l1(int rxsubchans)
+{
+ int mode = 0;
+
+ if (rxsubchans & V4L2_TUNER_SUB_STEREO)
+ mode |= VIDEO_SOUND_STEREO;
+ if (rxsubchans & V4L2_TUNER_SUB_LANG2)
+ mode |= VIDEO_SOUND_LANG2;
+ if (rxsubchans & V4L2_TUNER_SUB_LANG1)
+ mode |= VIDEO_SOUND_LANG1;
+ if (mode == 0)
+ mode |= VIDEO_SOUND_MONO;
+ return mode;
+}
+
+static int msp_mode_v4l1_to_v4l2(int mode)
+{
+ if (mode & VIDEO_SOUND_STEREO)
+ return V4L2_TUNER_MODE_STEREO;
+ if (mode & VIDEO_SOUND_LANG2)
+ return V4L2_TUNER_MODE_LANG2;
+ if (mode & VIDEO_SOUND_LANG1)
+ return V4L2_TUNER_MODE_LANG1;
+ return V4L2_TUNER_MODE_MONO;
+}
+
+static void msp_any_detect_stereo(struct i2c_client *client)
+{
+ struct msp_state *state = i2c_get_clientdata(client);
+
+ switch (state->opmode) {
+ case OPMODE_MANUAL:
+ case OPMODE_AUTODETECT:
+ autodetect_stereo(client);
+ break;
+ case OPMODE_AUTOSELECT:
+ msp34xxg_detect_stereo(client);
+ break;
+ }
+}
+
+static struct v4l2_queryctrl msp_qctrl[] = {
+ {
+ .id = V4L2_CID_AUDIO_VOLUME,
+ .name = "Volume",
+ .minimum = 0,
+ .maximum = 65535,
+ .step = 65535/100,
+ .default_value = 58880,
+ .flags = 0,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ },{
+ .id = V4L2_CID_AUDIO_BALANCE,
+ .name = "Balance",
+ .minimum = 0,
+ .maximum = 65535,
+ .step = 65535/100,
+ .default_value = 32768,
+ .flags = 0,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ },{
+ .id = V4L2_CID_AUDIO_MUTE,
+ .name = "Mute",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+ .default_value = 1,
+ .flags = 0,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ },{
+ .id = V4L2_CID_AUDIO_BASS,
+ .name = "Bass",
+ .minimum = 0,
+ .maximum = 65535,
+ .step = 65535/100,
+ .default_value = 32768,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ },{
+ .id = V4L2_CID_AUDIO_TREBLE,
+ .name = "Treble",
+ .minimum = 0,
+ .maximum = 65535,
+ .step = 65535/100,
+ .default_value = 32768,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ },
+};
+
+
+static void msp_any_set_audmode(struct i2c_client *client, int audmode)
+{
+ struct msp_state *state = i2c_get_clientdata(client);
+
+ switch (state->opmode) {
+ case OPMODE_MANUAL:
+ case OPMODE_AUTODETECT:
+ state->watch_stereo = 0;
+ msp3400c_setstereo(client, audmode);
+ break;
+ case OPMODE_AUTOSELECT:
+ msp34xxg_set_audmode(client, audmode);
+ break;
+ }
+}
+
+static int msp_get_ctrl(struct i2c_client *client, struct v4l2_control *ctrl)
+{
+ struct msp_state *state = i2c_get_clientdata(client);
+
+ switch (ctrl->id) {
+ case V4L2_CID_AUDIO_MUTE:
+ ctrl->value = state->muted;
+ break;
+
+ case V4L2_CID_AUDIO_BALANCE:
+ ctrl->value = state->balance;
+ break;
+
+ case V4L2_CID_AUDIO_BASS:
+ ctrl->value = state->bass;
+ break;
+
+ case V4L2_CID_AUDIO_TREBLE:
+ ctrl->value = state->treble;
+ break;
+
+ case V4L2_CID_AUDIO_VOLUME:
+ ctrl->value = state->volume;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int msp_set_ctrl(struct i2c_client *client, struct v4l2_control *ctrl)
+{
+ struct msp_state *state = i2c_get_clientdata(client);
+
+ switch (ctrl->id) {
+ case V4L2_CID_AUDIO_MUTE:
+ if (ctrl->value < 0 || ctrl->value >= 2)
+ return -ERANGE;
+ state->muted = ctrl->value;
+ break;
+
+ case V4L2_CID_AUDIO_BASS:
+ state->bass = ctrl->value;
+ break;
+
+ case V4L2_CID_AUDIO_TREBLE:
+ state->treble = ctrl->value;
+ break;
+
+ case V4L2_CID_AUDIO_BALANCE:
+ state->balance = ctrl->value;
+ break;
+
+ case V4L2_CID_AUDIO_VOLUME:
+ state->volume = ctrl->value;
+ if (state->volume == 0)
+ state->balance = 32768;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ msp_set_audio(client);
+ return 0;
+}
+
+static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg)
+{
+ struct msp_state *state = i2c_get_clientdata(client);
+ u16 *sarg = arg;
+ int scart = 0;
+
+ if (debug >= 2)
+ v4l_i2c_print_ioctl(client, cmd);
+
+ switch (cmd) {
+ case AUDC_SET_INPUT:
+ if (*sarg == state->input)
+ break;
+ state->input = *sarg;
+ switch (*sarg) {
+ case AUDIO_RADIO:
+ /* Hauppauge uses IN2 for the radio */
+ state->mode = MSP_MODE_FM_RADIO;
+ scart = SCART_IN2;
+ break;
+ case AUDIO_EXTERN_1:
+ /* IN1 is often used for external input ... */
+ state->mode = MSP_MODE_EXTERN;
+ scart = SCART_IN1;
+ break;
+ case AUDIO_EXTERN_2:
+ /* ... sometimes it is IN2 through ;) */
+ state->mode = MSP_MODE_EXTERN;
+ scart = SCART_IN2;
+ break;
+ case AUDIO_TUNER:
+ state->mode = -1;
+ break;
+ default:
+ if (*sarg & AUDIO_MUTE)
+ msp_set_scart(client, SCART_MUTE, 0);
+ break;
+ }
+ if (scart) {
+ state->rxsubchans = V4L2_TUNER_SUB_STEREO;
+ state->audmode = V4L2_TUNER_MODE_STEREO;
+ msp_set_scart(client, scart, 0);
+ msp_write_dsp(client, 0x000d, 0x1900);
+ if (state->opmode != OPMODE_AUTOSELECT)
+ msp3400c_setstereo(client, state->audmode);
+ }
+ msp_wake_thread(client);
+ break;
+
+ case AUDC_SET_RADIO:
+ state->norm = VIDEO_MODE_RADIO;
+ msp_dbg1("switching to radio mode\n");
+ state->watch_stereo = 0;
+ switch (state->opmode) {
+ case OPMODE_MANUAL:
+ /* set msp3400 to FM radio mode */
+ msp3400c_setmode(client, MSP_MODE_FM_RADIO);
+ msp3400c_setcarrier(client, MSP_CARRIER(10.7),
+ MSP_CARRIER(10.7));
+ msp_set_audio(client);
+ break;
+ case OPMODE_AUTODETECT:
+ case OPMODE_AUTOSELECT:
+ /* the thread will do for us */
+ msp_wake_thread(client);
+ break;
+ }
+ break;
+
+ /* --- v4l ioctls --- */
+ /* take care: bttv does userspace copying, we'll get a
+ kernel pointer here... */
+ case VIDIOCGAUDIO:
+ {
+ struct video_audio *va = arg;
+
+ va->flags |= VIDEO_AUDIO_VOLUME |
+ VIDEO_AUDIO_BASS |
+ VIDEO_AUDIO_TREBLE |
+ VIDEO_AUDIO_MUTABLE;
+ if (state->muted)
+ va->flags |= VIDEO_AUDIO_MUTE;
+
+ if (state->muted)
+ va->flags |= VIDEO_AUDIO_MUTE;
+ va->volume = state->volume;
+ va->balance = state->volume ? state->balance : 32768;
+ va->bass = state->bass;
+ va->treble = state->treble;
+
+ msp_any_detect_stereo(client);
+ va->mode = msp_mode_v4l2_to_v4l1(state->rxsubchans);
+ break;
+ }
+
+ case VIDIOCSAUDIO:
+ {
+ struct video_audio *va = arg;
+
+ state->muted = (va->flags & VIDEO_AUDIO_MUTE);
+ state->volume = va->volume;
+ state->balance = va->balance;
+ state->bass = va->bass;
+ state->treble = va->treble;
+ msp_set_audio(client);
+
+ if (va->mode != 0 && state->norm != VIDEO_MODE_RADIO)
+ msp_any_set_audmode(client, msp_mode_v4l1_to_v4l2(va->mode));
+ break;
+ }
+
+ case VIDIOCSCHAN:
+ {
+ struct video_channel *vc = arg;
+
+ state->norm = vc->norm;
+ msp_wake_thread(client);
+ break;
+ }
+
+ case VIDIOCSFREQ:
+ case VIDIOC_S_FREQUENCY:
+ {
+ /* new channel -- kick audio carrier scan */
+ msp_wake_thread(client);
+ break;
+ }
+
+ /* msp34xx specific */
+ case MSP_SET_MATRIX:
+ {
+ struct msp_matrix *mspm = arg;
+
+ msp_set_scart(client, mspm->input, mspm->output);
+ break;
+ }
+
+ /* --- v4l2 ioctls --- */
+ case VIDIOC_S_STD:
+ {
+ v4l2_std_id *id = arg;
+
+ /*FIXME: use V4L2 mode flags on msp3400 instead of V4L1*/
+ if (*id & V4L2_STD_PAL) {
+ state->norm = VIDEO_MODE_PAL;
+ } else if (*id & V4L2_STD_SECAM) {
+ state->norm = VIDEO_MODE_SECAM;
+ } else {
+ state->norm = VIDEO_MODE_NTSC;
+ }
+
+ msp_wake_thread(client);
+ return 0;
+ }
+
+ case VIDIOC_ENUMINPUT:
+ {
+ struct v4l2_input *i = arg;
+
+ if (i->index != 0)
+ return -EINVAL;
+
+ i->type = V4L2_INPUT_TYPE_TUNER;
+ switch (i->index) {
+ case AUDIO_RADIO:
+ strcpy(i->name, "Radio");
+ break;
+ case AUDIO_EXTERN_1:
+ strcpy(i->name, "Extern 1");
+ break;
+ case AUDIO_EXTERN_2:
+ strcpy(i->name, "Extern 2");
+ break;
+ case AUDIO_TUNER:
+ strcpy(i->name, "Television");
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+ }
+
+ case VIDIOC_G_AUDIO:
+ {
+ struct v4l2_audio *a = arg;
+
+ memset(a, 0, sizeof(*a));
+
+ switch (a->index) {
+ case AUDIO_RADIO:
+ strcpy(a->name, "Radio");
+ break;
+ case AUDIO_EXTERN_1:
+ strcpy(a->name, "Extern 1");
+ break;
+ case AUDIO_EXTERN_2:
+ strcpy(a->name, "Extern 2");
+ break;
+ case AUDIO_TUNER:
+ strcpy(a->name, "Television");
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ msp_any_detect_stereo(client);
+ if (state->audmode == V4L2_TUNER_MODE_STEREO) {
+ a->capability = V4L2_AUDCAP_STEREO;
+ }
+
+ break;
+ }
+
+ case VIDIOC_S_AUDIO:
+ {
+ struct v4l2_audio *sarg = arg;
+
+ switch (sarg->index) {
+ case AUDIO_RADIO:
+ /* Hauppauge uses IN2 for the radio */
+ state->mode = MSP_MODE_FM_RADIO;
+ scart = SCART_IN2;
+ break;
+ case AUDIO_EXTERN_1:
+ /* IN1 is often used for external input ... */
+ state->mode = MSP_MODE_EXTERN;
+ scart = SCART_IN1;
+ break;
+ case AUDIO_EXTERN_2:
+ /* ... sometimes it is IN2 through ;) */
+ state->mode = MSP_MODE_EXTERN;
+ scart = SCART_IN2;
+ break;
+ case AUDIO_TUNER:
+ state->mode = -1;
+ break;
+ }
+ if (scart) {
+ state->rxsubchans = V4L2_TUNER_SUB_STEREO;
+ state->audmode = V4L2_TUNER_MODE_STEREO;
+ msp_set_scart(client, scart, 0);
+ msp_write_dsp(client, 0x000d, 0x1900);
+ }
+ if (sarg->capability == V4L2_AUDCAP_STEREO) {
+ state->audmode = V4L2_TUNER_MODE_STEREO;
+ } else {
+ state->audmode &= ~V4L2_TUNER_MODE_STEREO;
+ }
+ msp_any_set_audmode(client, state->audmode);
+ msp_wake_thread(client);
+ break;
+ }
+
+ case VIDIOC_G_TUNER:
+ {
+ struct v4l2_tuner *vt = arg;
+
+ msp_any_detect_stereo(client);
+ vt->audmode = state->audmode;
+ vt->rxsubchans = state->rxsubchans;
+ vt->capability = V4L2_TUNER_CAP_STEREO |
+ V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2;
+ break;
+ }
+
+ case VIDIOC_S_TUNER:
+ {
+ struct v4l2_tuner *vt = (struct v4l2_tuner *)arg;
+
+ /* only set audmode */
+ if (vt->audmode != -1 && vt->audmode != 0)
+ msp_any_set_audmode(client, vt->audmode);
+ break;
+ }
+
+ case VIDIOC_G_AUDOUT:
+ {
+ struct v4l2_audioout *a = (struct v4l2_audioout *)arg;
+ int idx = a->index;
+
+ memset(a, 0, sizeof(*a));
+
+ switch (idx) {
+ case 0:
+ strcpy(a->name, "Scart1 Out");
+ break;
+ case 1:
+ strcpy(a->name, "Scart2 Out");
+ break;
+ case 2:
+ strcpy(a->name, "I2S Out");
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+
+ }
+
+ case VIDIOC_S_AUDOUT:
+ {
+ struct v4l2_audioout *a = (struct v4l2_audioout *)arg;
+
+ if (a->index < 0 || a->index > 2)
+ return -EINVAL;
+
+ msp_dbg1("Setting audio out on msp34xx to input %i\n", a->index);
+ msp_set_scart(client, state->in_scart, a->index + 1);
+
+ break;
+ }
+
+ case VIDIOC_INT_I2S_CLOCK_FREQ:
+ {
+ u32 *a = (u32 *)arg;
+
+ msp_dbg1("Setting I2S speed to %d\n", *a);
+
+ switch (*a) {
+ case 1024000:
+ state->i2s_mode = 0;
+ break;
+ case 2048000:
+ state->i2s_mode = 1;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ }
+
+ case VIDIOC_QUERYCTRL:
+ {
+ struct v4l2_queryctrl *qc = arg;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(msp_qctrl); i++)
+ if (qc->id && qc->id == msp_qctrl[i].id) {
+ memcpy(qc, &msp_qctrl[i], sizeof(*qc));
+ return 0;
+ }
+ return -EINVAL;
+ }
+
+ case VIDIOC_G_CTRL:
+ return msp_get_ctrl(client, arg);
+
+ case VIDIOC_S_CTRL:
+ return msp_set_ctrl(client, arg);
+
+ case VIDIOC_LOG_STATUS:
+ msp_any_detect_stereo(client);
+ msp_info("%s rev1 = 0x%04x rev2 = 0x%04x\n",
+ client->name, state->rev1, state->rev2);
+ msp_info("Audio: volume %d balance %d bass %d treble %d%s\n",
+ state->volume, state->balance,
+ state->bass, state->treble,
+ state->muted ? " (muted)" : "");
+ msp_info("Mode: %s (%s%s)\n", msp_standard_mode_name(state->mode),
+ (state->rxsubchans & V4L2_TUNER_SUB_STEREO) ? "stereo" : "mono",
+ (state->rxsubchans & V4L2_TUNER_SUB_LANG2) ? ", dual" : "");
+ msp_info("ACB: 0x%04x\n", state->acb);
+ break;
+
+ default:
+ /* nothing */
+ break;
+ }
+ return 0;
+}
+
+static int msp_suspend(struct device * dev, pm_message_t state)
+{
+ struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+
+ msp_dbg1("suspend\n");
+ msp_reset(client);
+ return 0;
+}
+
+static int msp_resume(struct device * dev)
+{
+ struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+
+ msp_dbg1("resume\n");
+ msp_wake_thread(client);
+ return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static struct i2c_driver i2c_driver;
+
+static int msp_attach(struct i2c_adapter *adapter, int address, int kind)
+{
+ struct i2c_client *client;
+ struct msp_state *state;
+ int (*thread_func)(void *data) = NULL;
+
+ client = kmalloc(sizeof(*client), GFP_KERNEL);
+ if (client == NULL)
+ return -ENOMEM;
+ memset(client, 0, sizeof(*client));
+ client->addr = address;
+ client->adapter = adapter;
+ client->driver = &i2c_driver;
+ client->flags = I2C_CLIENT_ALLOW_USE;
+ snprintf(client->name, sizeof(client->name) - 1, "msp3400");
+
+ if (msp_reset(client) == -1) {
+ msp_dbg1("msp3400 not found\n");
+ kfree(client);
+ return -1;
+ }
+
+ state = kmalloc(sizeof(*state), GFP_KERNEL);
+ if (state == NULL) {
+ kfree(client);
+ return -ENOMEM;
+ }
+ i2c_set_clientdata(client, state);
+
+ memset(state, 0, sizeof(*state));
+ state->norm = VIDEO_MODE_NTSC;
+ state->volume = 58880; /* 0db gain */
+ state->balance = 32768; /* 0db gain */
+ state->bass = 32768;
+ state->treble = 32768;
+ state->input = -1;
+ state->muted = 0;
+ state->i2s_mode = 0;
+ init_waitqueue_head(&state->wq);
+
+ state->rev1 = msp_read_dsp(client, 0x1e);
+ if (state->rev1 != -1)
+ state->rev2 = msp_read_dsp(client, 0x1f);
+ msp_dbg1("rev1=0x%04x, rev2=0x%04x\n", state->rev1, state->rev2);
+ if (state->rev1 == -1 || (state->rev1 == 0 && state->rev2 == 0)) {
+ msp_dbg1("not an msp3400 (cannot read chip version)\n");
+ kfree(state);
+ kfree(client);
+ return -1;
+ }
+
+ msp_set_audio(client);
+
+ snprintf(client->name, sizeof(client->name), "MSP%c4%02d%c-%c%d",
+ ((state->rev1 >> 4) & 0x0f) + '3',
+ (state->rev2 >> 8) & 0xff,
+ (state->rev1 & 0x0f) + '@',
+ ((state->rev1 >> 8) & 0xff) + '@',
+ state->rev2 & 0x1f);
+
+ state->opmode = opmode;
+ if (state->opmode == OPMODE_AUTO) {
+ /* MSP revision G and up have both autodetect and autoselect */
+ if ((state->rev1 & 0x0f) >= 'G'-'@')
+ state->opmode = OPMODE_AUTOSELECT;
+ /* MSP revision D and up have autodetect */
+ else if ((state->rev1 & 0x0f) >= 'D'-'@')
+ state->opmode = OPMODE_AUTODETECT;
+ else
+ state->opmode = OPMODE_MANUAL;
+ }
+
+ /* hello world :-) */
+ msp_info("%s found @ 0x%x (%s)\n", client->name, address << 1, adapter->name);
+ msp_info("%s ", client->name);
+ if (HAVE_NICAM(state) && HAVE_RADIO(state))
+ printk("supports nicam and radio, ");
+ else if (HAVE_NICAM(state))
+ printk("supports nicam, ");
+ else if (HAVE_RADIO(state))
+ printk("supports radio, ");
+ printk("mode is ");
+
+ /* version-specific initialization */
+ switch (state->opmode) {
+ case OPMODE_MANUAL:
+ printk("manual");
+ thread_func = msp3400c_thread;
+ break;
+ case OPMODE_AUTODETECT:
+ printk("autodetect");
+ thread_func = msp3410d_thread;
+ break;
+ case OPMODE_AUTOSELECT:
+ printk("autodetect and autoselect");
+ thread_func = msp34xxg_thread;
+ break;
+ }
+ printk("\n");
+
+ /* startup control thread if needed */
+ if (thread_func) {
+ state->kthread = kthread_run(thread_func, client, "msp34xx");
+
+ if (state->kthread == NULL)
+ msp_warn("kernel_thread() failed\n");
+ msp_wake_thread(client);
+ }
+
+ /* done */
+ i2c_attach_client(client);
+
+ return 0;
+}
+
+static int msp_probe(struct i2c_adapter *adapter)
+{
+ if (adapter->class & I2C_CLASS_TV_ANALOG)
+ return i2c_probe(adapter, &addr_data, msp_attach);
+ return 0;
+}
+
+static int msp_detach(struct i2c_client *client)
+{
+ struct msp_state *state = i2c_get_clientdata(client);
+ int err;
+
+ /* shutdown control thread */
+ if (state->kthread) {
+ state->restart = 1;
+ kthread_stop(state->kthread);
+ }
+ msp_reset(client);
+
+ err = i2c_detach_client(client);
+ if (err) {
+ return err;
+ }
+
+ kfree(state);
+ kfree(client);
+ return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+/* i2c implementation */
+static struct i2c_driver i2c_driver = {
+ .id = I2C_DRIVERID_MSP3400,
+ .attach_adapter = msp_probe,
+ .detach_client = msp_detach,
+ .command = msp_command,
+ .driver = {
+ .name = "msp3400",
+ .suspend = msp_suspend,
+ .resume = msp_resume,
+ },
+ .owner = THIS_MODULE,
+};
+
+static int __init msp3400_init_module(void)
+{
+ return i2c_add_driver(&i2c_driver);
+}
+
+static void __exit msp3400_cleanup_module(void)
+{
+ i2c_del_driver(&i2c_driver);
+}
+
+module_init(msp3400_init_module);
+module_exit(msp3400_cleanup_module);
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/video/msp3400.c b/drivers/media/video/msp3400.c
deleted file mode 100644
index 627c311..0000000
--- a/drivers/media/video/msp3400.c
+++ /dev/null
@@ -1,2289 +0,0 @@
-/*
- * programming the msp34* sound processor family
- *
- * (c) 1997-2001 Gerd Knorr <[email protected]>
- *
- * what works and what doesn't:
- *
- * AM-Mono
- * Support for Hauppauge cards added (decoding handled by tuner) added by
- * Frederic Crozat <[email protected]>
- *
- * FM-Mono
- * should work. The stereo modes are backward compatible to FM-mono,
- * therefore FM-Mono should be allways available.
- *
- * FM-Stereo (B/G, used in germany)
- * should work, with autodetect
- *
- * FM-Stereo (satellite)
- * should work, no autodetect (i.e. default is mono, but you can
- * switch to stereo -- untested)
- *
- * NICAM (B/G, L , used in UK, Scandinavia, Spain and France)
- * should work, with autodetect. Support for NICAM was added by
- * Pekka Pietikainen <[email protected]>
- *
- *
- * TODO:
- * - better SAT support
- *
- *
- * 980623 Thomas Sailer ([email protected])
- * using soundcore instead of OSS
- *
- */
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/smp_lock.h>
-#include <linux/kthread.h>
-#include <linux/suspend.h>
-#include <asm/semaphore.h>
-#include <asm/pgtable.h>
-
-#include <linux/videodev.h>
-#include <media/audiochip.h>
-#include <media/v4l2-common.h>
-#include "msp3400.h"
-
-/* ---------------------------------------------------------------------- */
-
-MODULE_DESCRIPTION("device driver for msp34xx TV sound processor");
-MODULE_AUTHOR("Gerd Knorr");
-MODULE_LICENSE("GPL");
-
-#define OPMODE_AUTO -1
-#define OPMODE_MANUAL 0
-#define OPMODE_AUTODETECT 1 /* use autodetect (>= msp3410 only) */
-#define OPMODE_AUTOSELECT 2 /* use autodetect & autoselect (>= msp34xxG) */
-
-/* module parameters */
-static int opmode = OPMODE_AUTO;
-static int debug = 0; /* debug output */
-static int once = 0; /* no continous stereo monitoring */
-static int amsound = 0; /* hard-wire AM sound at 6.5 Hz (france),
- the autoscan seems work well only with FM... */
-static int standard = 1; /* Override auto detect of audio standard, if needed. */
-static int dolby = 0;
-
-static int stereo_threshold = 0x190; /* a2 threshold for stereo/bilingual
- (msp34xxg only) 0x00a0-0x03c0 */
-
-/* read-only */
-module_param(opmode, int, 0444);
-
-/* read-write */
-module_param(once, int, 0644);
-module_param(debug, int, 0644);
-module_param(stereo_threshold, int, 0644);
-module_param(standard, int, 0644);
-module_param(amsound, int, 0644);
-module_param(dolby, int, 0644);
-
-MODULE_PARM_DESC(opmode, "Forces a MSP3400 opmode. 0=Manual, 1=Autodetect, 2=Autodetect and autoselect");
-MODULE_PARM_DESC(once, "No continuous stereo monitoring");
-MODULE_PARM_DESC(debug, "Enable debug messages");
-MODULE_PARM_DESC(stereo_threshold, "Sets signal threshold to activate stereo");
-MODULE_PARM_DESC(standard, "Specify audio standard: 32 = NTSC, 64 = radio, Default: Autodetect");
-MODULE_PARM_DESC(amsound, "Hardwire AM sound at 6.5Hz (France), FM can autoscan");
-MODULE_PARM_DESC(dolby, "Activates Dolby processsing");
-
-/* ---------------------------------------------------------------------- */
-
-#define msp3400_err(fmt, arg...) do { \
- printk(KERN_ERR "%s %d-%04x: " fmt, client->driver->driver.name, \
- i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0)
-#define msp3400_warn(fmt, arg...) do { \
- printk(KERN_WARNING "%s %d-%04x: " fmt, client->driver->driver.name, \
- i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0)
-#define msp3400_info(fmt, arg...) do { \
- printk(KERN_INFO "%s %d-%04x: " fmt, client->driver->driver.name, \
- i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0)
-
-/* level 1 debug. */
-#define msp_dbg1(fmt, arg...) \
- do { \
- if (debug) \
- printk(KERN_INFO "%s debug %d-%04x: " fmt, \
- client->driver->driver.name, \
- i2c_adapter_id(client->adapter), client->addr , ## arg); \
- } while (0)
-
-/* level 2 debug. */
-#define msp_dbg2(fmt, arg...) \
- do { \
- if (debug >= 2) \
- printk(KERN_INFO "%s debug %d-%04x: " fmt, \
- client->driver->driver.name, \
- i2c_adapter_id(client->adapter), client->addr , ## arg); \
- } while (0)
-
-/* level 3 debug. Use with care. */
-#define msp_dbg3(fmt, arg...) \
- do { \
- if (debug >= 16) \
- printk(KERN_INFO "%s debug %d-%04x: " fmt, \
- client->driver->driver.name, \
- i2c_adapter_id(client->adapter), client->addr , ## arg); \
- } while (0)
-
-/* control subaddress */
-#define I2C_MSP_CONTROL 0x00
-/* demodulator unit subaddress */
-#define I2C_MSP_DEM 0x10
-/* DSP unit subaddress */
-#define I2C_MSP_DSP 0x12
-
-/* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x80 >> 1, 0x88 >> 1, I2C_CLIENT_END };
->>>>>>> remote
-
-
-I2C_CLIENT_INSMOD;
-
-#define DFP_COUNT 0x41
-static const int bl_dfp[] = {
- 0x00, 0x01, 0x02, 0x03, 0x06, 0x08, 0x09, 0x0a,
- 0x0b, 0x0d, 0x0e, 0x10
-};
-
-#define HAVE_NICAM(state) (((state->rev2 >> 8) & 0xff) != 0)
-#define HAVE_RADIO(state) ((state->rev1 & 0x0f) >= 'G'-'@')
-
-struct msp_state {
- int rev1, rev2;
-
- int opmode;
- int mode;
- int norm;
- int stereo;
- int nicam_on;
- int acb;
- int in_scart;
- int i2s_mode;
- int main, second; /* sound carrier */
- int input;
- int source; /* see msp34xxg_set_source */
-
- /* v4l2 */
- int audmode;
- int rxsubchans;
-
- int muted;
- int volume, balance;
- int bass, treble;
-
- /* shadow register set */
- int dfp_regs[DFP_COUNT];
-
- /* thread */
- struct task_struct *kthread;
- wait_queue_head_t wq;
- int restart:1;
- int watch_stereo:1;
-};
-
-#define VIDEO_MODE_RADIO 16 /* norm magic for radio mode */
-
-
-/* ----------------------------------------------------------------------- */
-/* functions for talking to the MSP3400C Sound processor */
-
-static int msp_reset(struct i2c_client *client)
-{
- /* reset and read revision code */
- static u8 reset_off[3] = { I2C_MSP_CONTROL, 0x80, 0x00 };
- static u8 reset_on[3] = { I2C_MSP_CONTROL, 0x00, 0x00 };
- static u8 write[3] = { I2C_MSP_DSP + 1, 0x00, 0x1e };
- u8 read[2];
- struct i2c_msg reset[2] = {
- { client->addr, I2C_M_IGNORE_NAK, 3, reset_off },
- { client->addr, I2C_M_IGNORE_NAK, 3, reset_on },
- };
- struct i2c_msg test[2] = {
- { client->addr, 0, 3, write },
- { client->addr, I2C_M_RD, 2, read },
- };
-
- msp_dbg3("msp_reset\n");
- if (i2c_transfer(client->adapter, &reset[0], 1) != 1 ||
- i2c_transfer(client->adapter, &reset[1], 1) != 1 ||
- i2c_transfer(client->adapter, test, 2) != 2) {
- msp_err("chip reset failed\n");
- return -1;
- }
- return 0;
-}
-
-static int msp_read(struct i2c_client *client, int dev, int addr)
-{
- int err, retval;
- u8 write[3];
- u8 read[2];
- struct i2c_msg msgs[2] = {
- { client->addr, 0, 3, write },
- { client->addr, I2C_M_RD, 2, read }
- };
-
- write[0] = dev + 1;
- write[1] = addr >> 8;
- write[2] = addr & 0xff;
-
- for (err = 0; err < 3; err++) {
- if (i2c_transfer(client->adapter, msgs, 2) == 2)
- break;
- msp_warn("I/O error #%d (read 0x%02x/0x%02x)\n", err,
- dev, addr);
- current->state = TASK_INTERRUPTIBLE;
- schedule_timeout(msecs_to_jiffies(10));
- }
- if (err == 3) {
- msp_warn("giving up, resetting chip. Sound will go off, sorry folks :-|\n");
- msp_reset(client);
- return -1;
- }
- retval = read[0] << 8 | read[1];
- msp_dbg3("msp_read(0x%x, 0x%x): 0x%x\n", dev, addr, retval);
- return retval;
-}
-
-static inline int msp_read_dem(struct i2c_client *client, int addr)
-{
- return msp_read(client, I2C_MSP_DEM, addr);
-}
-
-static inline int msp_read_dsp(struct i2c_client *client, int addr)
-{
- return msp_read(client, I2C_MSP_DSP, addr);
-}
-
-static int msp_write(struct i2c_client *client, int dev, int addr, int val)
-{
- int err;
- u8 buffer[5];
-
- buffer[0] = dev;
- buffer[1] = addr >> 8;
- buffer[2] = addr & 0xff;
- buffer[3] = val >> 8;
- buffer[4] = val & 0xff;
-
- msp_dbg3("msp_write(0x%x, 0x%x, 0x%x)\n", dev, addr, val);
- for (err = 0; err < 3; err++) {
- if (i2c_master_send(client, buffer, 5) == 5)
- break;
- msp_warn("I/O error #%d (write 0x%02x/0x%02x)\n", err,
- dev, addr);
- current->state = TASK_INTERRUPTIBLE;
- schedule_timeout(msecs_to_jiffies(10));
- }
- if (err == 3) {
- msp_warn("giving up, resetting chip. Sound will go off, sorry folks :-|\n");
- msp_reset(client);
- return -1;
- }
- return 0;
-}
-
-static inline int msp_write_dem(struct i2c_client *client, int addr, int val)
-{
- return msp_write(client, I2C_MSP_DEM, addr, val);
-}
-
-static inline int msp_write_dsp(struct i2c_client *client, int addr, int val)
-{
- return msp_write(client, I2C_MSP_DSP, addr, val);
-}
-
-/* ----------------------------------------------------------------------- *
- * bits 9 8 5 - SCART DSP input Select:
- * 0 0 0 - SCART 1 to DSP input (reset position)
- * 0 1 0 - MONO to DSP input
- * 1 0 0 - SCART 2 to DSP input
- * 1 1 1 - Mute DSP input
- *
- * bits 11 10 6 - SCART 1 Output Select:
- * 0 0 0 - undefined (reset position)
- * 0 1 0 - SCART 2 Input to SCART 1 Output (for devices with 2 SCARTS)
- * 1 0 0 - MONO input to SCART 1 Output
- * 1 1 0 - SCART 1 DA to SCART 1 Output
- * 0 0 1 - SCART 2 DA to SCART 1 Output
- * 0 1 1 - SCART 1 Input to SCART 1 Output
- * 1 1 1 - Mute SCART 1 Output
- *
- * bits 13 12 7 - SCART 2 Output Select (for devices with 2 Output SCART):
- * 0 0 0 - SCART 1 DA to SCART 2 Output (reset position)
- * 0 1 0 - SCART 1 Input to SCART 2 Output
- * 1 0 0 - MONO input to SCART 2 Output
- * 0 0 1 - SCART 2 DA to SCART 2 Output
- * 0 1 1 - SCART 2 Input to SCART 2 Output
- * 1 1 0 - Mute SCART 2 Output
- *
- * Bits 4 to 0 should be zero.
- * ----------------------------------------------------------------------- */
-
-static int scarts[3][9] = {
- /* MASK IN1 IN2 IN1_DA IN2_DA IN3 IN4 MONO MUTE */
- /* SCART DSP Input select */
- { 0x0320, 0x0000, 0x0200, -1, -1, 0x0300, 0x0020, 0x0100, 0x0320 },
- /* SCART1 Output select */
- { 0x0c40, 0x0440, 0x0400, 0x0c00, 0x0040, 0x0000, 0x0840, 0x0800, 0x0c40 },
- /* SCART2 Output select */
- { 0x3080, 0x1000, 0x1080, 0x0000, 0x0080, 0x2080, 0x3080, 0x2000, 0x3000 },
-};
-
-static char *scart_names[] = {
- "mask", "in1", "in2", "in1 da", "in2 da", "in3", "in4", "mono", "mute"
-};
-
-static void msp_set_scart(struct i2c_client *client, int in, int out)
-{
- struct msp_state *state = i2c_get_clientdata(client);
-
- state->in_scart=in;
-
- if (in >= 1 && in <= 8 && out >= 0 && out <= 2) {
- if (-1 == scarts[out][in])
- return;
-
- state->acb &= ~scarts[out][SCART_MASK];
- state->acb |= scarts[out][in];
- } else
- state->acb = 0xf60; /* Mute Input and SCART 1 Output */
-
- msp_dbg1("scart switch: %s => %d (ACB=0x%04x)\n",
- scart_names[in], out, state->acb);
- msp_write_dsp(client, 0x13, state->acb);
-
- /* Sets I2S speed 0 = 1.024 Mbps, 1 = 2.048 Mbps */
- msp_write_dem(client, 0x40, state->i2s_mode);
-}
-
-/* ------------------------------------------------------------------------ */
-
-/* This macro is allowed for *constants* only, gcc must calculate it
- at compile time. Remember -- no floats in kernel mode */
-#define MSP_CARRIER(freq) ((int)((float)(freq / 18.432) * (1 << 24)))
-
-#define MSP_MODE_AM_DETECT 0
-#define MSP_MODE_FM_RADIO 2
-#define MSP_MODE_FM_TERRA 3
-#define MSP_MODE_FM_SAT 4
-#define MSP_MODE_FM_NICAM1 5
-#define MSP_MODE_FM_NICAM2 6
-#define MSP_MODE_AM_NICAM 7
-#define MSP_MODE_BTSC 8
-#define MSP_MODE_EXTERN 9
-
-static struct msp3400c_init_data_dem {
- int fir1[6];
- int fir2[6];
- int cdo1;
- int cdo2;
- int ad_cv;
- int mode_reg;
- int dfp_src;
- int dfp_matrix;
-} msp3400c_init_data[] = {
- { /* AM (for carrier detect / msp3400) */
- {75, 19, 36, 35, 39, 40},
- {75, 19, 36, 35, 39, 40},
- MSP_CARRIER(5.5), MSP_CARRIER(5.5),
- 0x00d0, 0x0500, 0x0020, 0x3000
- },{ /* AM (for carrier detect / msp3410) */
- {-1, -1, -8, 2, 59, 126},
- {-1, -1, -8, 2, 59, 126},
- MSP_CARRIER(5.5), MSP_CARRIER(5.5),
- 0x00d0, 0x0100, 0x0020, 0x3000
- },{ /* FM Radio */
- {-8, -8, 4, 6, 78, 107},
- {-8, -8, 4, 6, 78, 107},
- MSP_CARRIER(10.7), MSP_CARRIER(10.7),
- 0x00d0, 0x0480, 0x0020, 0x3000
- },{ /* Terrestial FM-mono + FM-stereo */
- {3, 18, 27, 48, 66, 72},
- {3, 18, 27, 48, 66, 72},
- MSP_CARRIER(5.5), MSP_CARRIER(5.5),
- 0x00d0, 0x0480, 0x0030, 0x3000
- },{ /* Sat FM-mono */
- { 1, 9, 14, 24, 33, 37},
- { 3, 18, 27, 48, 66, 72},
- MSP_CARRIER(6.5), MSP_CARRIER(6.5),
- 0x00c6, 0x0480, 0x0000, 0x3000
- },{ /* NICAM/FM -- B/G (5.5/5.85), D/K (6.5/5.85) */
- {-2, -8, -10, 10, 50, 86},
- {3, 18, 27, 48, 66, 72},
- MSP_CARRIER(5.5), MSP_CARRIER(5.5),
- 0x00d0, 0x0040, 0x0120, 0x3000
- },{ /* NICAM/FM -- I (6.0/6.552) */
- {2, 4, -6, -4, 40, 94},
- {3, 18, 27, 48, 66, 72},
- MSP_CARRIER(6.0), MSP_CARRIER(6.0),
- 0x00d0, 0x0040, 0x0120, 0x3000
- },{ /* NICAM/AM -- L (6.5/5.85) */
- {-2, -8, -10, 10, 50, 86},
- {-4, -12, -9, 23, 79, 126},
- MSP_CARRIER(6.5), MSP_CARRIER(6.5),
- 0x00c6, 0x0140, 0x0120, 0x7c03
- },
-};
-
-struct msp3400c_carrier_detect {
- int cdo;
- char *name;
-};
-
-static struct msp3400c_carrier_detect msp3400c_carrier_detect_main[] = {
- /* main carrier */
- { MSP_CARRIER(4.5), "4.5 NTSC" },
- { MSP_CARRIER(5.5), "5.5 PAL B/G" },
- { MSP_CARRIER(6.0), "6.0 PAL I" },
- { MSP_CARRIER(6.5), "6.5 PAL D/K + SAT + SECAM" }
-};
-
-static struct msp3400c_carrier_detect msp3400c_carrier_detect_55[] = {
- /* PAL B/G */
- { MSP_CARRIER(5.7421875), "5.742 PAL B/G FM-stereo" },
- { MSP_CARRIER(5.85), "5.85 PAL B/G NICAM" }
-};
-
-static struct msp3400c_carrier_detect msp3400c_carrier_detect_65[] = {
- /* PAL SAT / SECAM */
- { MSP_CARRIER(5.85), "5.85 PAL D/K + SECAM NICAM" },
- { MSP_CARRIER(6.2578125), "6.25 PAL D/K1 FM-stereo" },
- { MSP_CARRIER(6.7421875), "6.74 PAL D/K2 FM-stereo" },
- { MSP_CARRIER(7.02), "7.02 PAL SAT FM-stereo s/b" },
- { MSP_CARRIER(7.20), "7.20 PAL SAT FM-stereo s" },
- { MSP_CARRIER(7.38), "7.38 PAL SAT FM-stereo b" },
-};
-
-/* ------------------------------------------------------------------------ */
-
-static void msp3400c_setcarrier(struct i2c_client *client, int cdo1, int cdo2)
-{
- msp_write_dem(client, 0x0093, cdo1 & 0xfff);
- msp_write_dem(client, 0x009b, cdo1 >> 12);
- msp_write_dem(client, 0x00a3, cdo2 & 0xfff);
- msp_write_dem(client, 0x00ab, cdo2 >> 12);
- msp_write_dem(client, 0x0056, 0); /*LOAD_REG_1/2*/
-}
-
-static void msp_set_mute(struct i2c_client *client)
-{
- msp_dbg1("mute audio\n");
- msp_write_dsp(client, 0x0000, 0); /* loudspeaker */
- msp_write_dsp(client, 0x0006, 0); /* headphones */
-}
-
-static void msp_set_audio(struct i2c_client *client)
-{
- struct msp_state *state = i2c_get_clientdata(client);
- int val = 0, bal = 0, bass, treble;
-
- if (!state->muted)
- val = (state->volume * 0x7f / 65535) << 8;
- if (val)
- bal = (state->balance / 256) - 128;
- bass = ((state->bass - 32768) * 0x60 / 65535) << 8;
- treble = ((state->treble - 32768) * 0x60 / 65535) << 8;
-
- msp_dbg1("mute=%s volume=%d balance=%d bass=%d treble=%d\n",
- state->muted ? "on" : "off", state->volume, state->balance,
- state->bass, state->treble);
-
- msp_write_dsp(client, 0x0000, val); /* loudspeaker */
- msp_write_dsp(client, 0x0006, val); /* headphones */
- msp_write_dsp(client, 0x0007, state->muted ? 0x1 : (val | 0x1));
- msp_write_dsp(client, 0x0001, bal << 8);
- msp_write_dsp(client, 0x0002, bass); /* loudspeaker */
- msp_write_dsp(client, 0x0003, treble); /* loudspeaker */
-}
-
-static void msp3400c_setmode(struct i2c_client *client, int type)
-{
- struct msp_state *state = i2c_get_clientdata(client);
- int i;
-
- msp_dbg1("setmode: %d\n",type);
- state->mode = type;
- state->audmode = V4L2_TUNER_MODE_MONO;
- state->rxsubchans = V4L2_TUNER_SUB_MONO;
-
- msp_write_dem(client, 0x00bb, /* ad_cv */
- msp3400c_init_data[type].ad_cv);
-
- for (i = 5; i >= 0; i--) /* fir 1 */
- msp_write_dem(client, 0x0001,
- msp3400c_init_data[type].fir1[i]);
-
- msp_write_dem(client, 0x0005, 0x0004); /* fir 2 */
- msp_write_dem(client, 0x0005, 0x0040);
- msp_write_dem(client, 0x0005, 0x0000);
- for (i = 5; i >= 0; i--)
- msp_write_dem(client, 0x0005,
- msp3400c_init_data[type].fir2[i]);
-
- msp_write_dem(client, 0x0083, /* MODE_REG */
- msp3400c_init_data[type].mode_reg);
-
- msp3400c_setcarrier(client, msp3400c_init_data[type].cdo1,
- msp3400c_init_data[type].cdo2);
-
- msp_write_dem(client, 0x0056, 0); /*LOAD_REG_1/2*/
-
- if (dolby) {
- msp_write_dsp(client, 0x0008,
- 0x0520); /* I2S1 */
- msp_write_dsp(client, 0x0009,
- 0x0620); /* I2S2 */
- msp_write_dsp(client, 0x000b,
- msp3400c_init_data[type].dfp_src);
- } else {
- msp_write_dsp(client, 0x0008,
- msp3400c_init_data[type].dfp_src);
- msp_write_dsp(client, 0x0009,
- msp3400c_init_data[type].dfp_src);
- msp_write_dsp(client, 0x000b,
- msp3400c_init_data[type].dfp_src);
- }
- msp_write_dsp(client, 0x000a,
- msp3400c_init_data[type].dfp_src);
- msp_write_dsp(client, 0x000e,
- msp3400c_init_data[type].dfp_matrix);
-
- if (HAVE_NICAM(state)) {
- /* nicam prescale */
- msp_write_dsp(client, 0x0010, 0x5a00); /* was: 0x3000 */
- }
-}
-
-/* given a bitmask of VIDEO_SOUND_XXX returns the "best" in the bitmask */
-static int msp3400c_best_video_sound(int rxsubchans)
-{
- if (rxsubchans & V4L2_TUNER_SUB_STEREO)
- return V4L2_TUNER_MODE_STEREO;
- if (rxsubchans & V4L2_TUNER_SUB_LANG1)
- return V4L2_TUNER_MODE_LANG1;
- if (rxsubchans & V4L2_TUNER_SUB_LANG2)
- return V4L2_TUNER_MODE_LANG2;
- return V4L2_TUNER_MODE_MONO;
-}
-
-/* turn on/off nicam + stereo */
-static void msp3400c_setstereo(struct i2c_client *client, int mode)
-{
- static char *strmode[] = { "0", "mono", "stereo", "3",
- "lang1", "5", "6", "7", "lang2"
- };
- struct msp_state *state = i2c_get_clientdata(client);
- int nicam = 0; /* channel source: FM/AM or nicam */
- int src = 0;
-
- if (state->opmode == OPMODE_AUTOSELECT) {
- /* this method would break everything, let's make sure
- * it's never called
- */
- msp_dbg1("setstereo called with mode=%d instead of set_source (ignored)\n",
- mode);
- return;
- }
-
- /* switch demodulator */
- switch (state->mode) {
- case MSP_MODE_FM_TERRA:
- msp_dbg1("FM setstereo: %s\n", strmode[mode]);
- msp3400c_setcarrier(client,state->second,state->main);
- switch (mode) {
- case V4L2_TUNER_MODE_STEREO:
- msp_write_dsp(client, 0x000e, 0x3001);
- break;
- case V4L2_TUNER_MODE_MONO:
- case V4L2_TUNER_MODE_LANG1:
- case V4L2_TUNER_MODE_LANG2:
- msp_write_dsp(client, 0x000e, 0x3000);
- break;
- }
- break;
- case MSP_MODE_FM_SAT:
- msp_dbg1("SAT setstereo: %s\n", strmode[mode]);
- switch (mode) {
- case V4L2_TUNER_MODE_MONO:
- msp3400c_setcarrier(client, MSP_CARRIER(6.5), MSP_CARRIER(6.5));
- break;
- case V4L2_TUNER_MODE_STEREO:
- msp3400c_setcarrier(client, MSP_CARRIER(7.2), MSP_CARRIER(7.02));
- break;
- case V4L2_TUNER_MODE_LANG1:
- msp3400c_setcarrier(client, MSP_CARRIER(7.38), MSP_CARRIER(7.02));
- break;
- case V4L2_TUNER_MODE_LANG2:
- msp3400c_setcarrier(client, MSP_CARRIER(7.38), MSP_CARRIER(7.02));
- break;
- }
- break;
- case MSP_MODE_FM_NICAM1:
- case MSP_MODE_FM_NICAM2:
- case MSP_MODE_AM_NICAM:
- msp_dbg1("NICAM setstereo: %s\n",strmode[mode]);
- msp3400c_setcarrier(client,state->second,state->main);
- if (state->nicam_on)
- nicam=0x0100;
- break;
- case MSP_MODE_BTSC:
- msp_dbg1("BTSC setstereo: %s\n",strmode[mode]);
- nicam=0x0300;
- break;
- case MSP_MODE_EXTERN:
- msp_dbg1("extern setstereo: %s\n",strmode[mode]);
- nicam = 0x0200;
- break;
- case MSP_MODE_FM_RADIO:
- msp_dbg1("FM-Radio setstereo: %s\n",strmode[mode]);
- break;
- default:
- msp_dbg1("mono setstereo\n");
- return;
- }
-
- /* switch audio */
- switch (msp3400c_best_video_sound(mode)) {
- case V4L2_TUNER_MODE_STEREO:
- src = 0x0020 | nicam;
- break;
- case V4L2_TUNER_MODE_MONO:
- if (state->mode == MSP_MODE_AM_NICAM) {
- msp_dbg1("switching to AM mono\n");
- /* AM mono decoding is handled by tuner, not MSP chip */
- /* SCART switching control register */
- msp_set_scart(client,SCART_MONO,0);
- src = 0x0200;
- break;
- }
- case V4L2_TUNER_MODE_LANG1:
- src = 0x0000 | nicam;
- break;
- case V4L2_TUNER_MODE_LANG2:
- src = 0x0010 | nicam;
- break;
- }
- msp_dbg1("setstereo final source/matrix = 0x%x\n", src);
-
- if (dolby) {
- msp_write_dsp(client, 0x0008,0x0520);
- msp_write_dsp(client, 0x0009,0x0620);
- msp_write_dsp(client, 0x000a,src);
- msp_write_dsp(client, 0x000b,src);
- } else {
- msp_write_dsp(client, 0x0008,src);
- msp_write_dsp(client, 0x0009,src);
- msp_write_dsp(client, 0x000a,src);
- msp_write_dsp(client, 0x000b,src);
- }
-}
-
-static void msp3400c_print_mode(struct i2c_client *client)
-{
- struct msp_state *state = i2c_get_clientdata(client);
-
- if (state->main == state->second) {
- msp_dbg1("mono sound carrier: %d.%03d MHz\n",
- state->main/910000,(state->main/910)%1000);
- } else {
- msp_dbg1("main sound carrier: %d.%03d MHz\n",
- state->main/910000,(state->main/910)%1000);
- }
- if (state->mode == MSP_MODE_FM_NICAM1 || state->mode == MSP_MODE_FM_NICAM2)
- msp_dbg1("NICAM/FM carrier : %d.%03d MHz\n",
- state->second/910000,(state->second/910)%1000);
- if (state->mode == MSP_MODE_AM_NICAM)
- msp_dbg1("NICAM/AM carrier : %d.%03d MHz\n",
- state->second/910000,(state->second/910)%1000);
- if (state->mode == MSP_MODE_FM_TERRA &&
- state->main != state->second) {
- msp_dbg1("FM-stereo carrier : %d.%03d MHz\n",
- state->second/910000,(state->second/910)%1000);
- }
-}
-
-static void msp3400c_restore_dfp(struct i2c_client *client)
-{
- struct msp_state *state = i2c_get_clientdata(client);
- int i;
-
- for (i = 0; i < DFP_COUNT; i++) {
- if (-1 == state->dfp_regs[i])
- continue;
- msp_write_dsp(client, i, state->dfp_regs[i]);
- }
-}
-
-/* if the dfp_regs is set, set what's in there. Otherwise, set the default value */
-static int msp34xxg_write_dfp_with_default(struct i2c_client *client,
- int addr, int default_value)
-{
- struct msp_state *state = i2c_get_clientdata(client);
- int value = default_value;
- if (addr < DFP_COUNT && -1 != state->dfp_regs[addr])
- value = state->dfp_regs[addr];
- return msp_write_dsp(client, addr, value);
-}
-
-/* ----------------------------------------------------------------------- */
-
-static int autodetect_stereo(struct i2c_client *client)
-{
- struct msp_state *state = i2c_get_clientdata(client);
- int val;
- int rxsubchans = state->rxsubchans;
- int newnicam = state->nicam_on;
- int update = 0;
-
- switch (state->mode) {
- case MSP_MODE_FM_TERRA:
- val = msp_read_dsp(client, 0x18);
- if (val > 32767)
- val -= 65536;
- msp_dbg2("stereo detect register: %d\n",val);
- if (val > 4096) {
- rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_MONO;
- } else if (val < -4096) {
- rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
- } else {
- rxsubchans = V4L2_TUNER_SUB_MONO;
- }
- newnicam = 0;
- break;
- case MSP_MODE_FM_NICAM1:
- case MSP_MODE_FM_NICAM2:
- case MSP_MODE_AM_NICAM:
- val = msp_read_dem(client, 0x23);
- msp_dbg2("nicam sync=%d, mode=%d\n",
- val & 1, (val & 0x1e) >> 1);
-
- if (val & 1) {
- /* nicam synced */
- switch ((val & 0x1e) >> 1) {
- case 0:
- case 8:
- rxsubchans = V4L2_TUNER_SUB_STEREO;
- break;
- case 1:
- case 9:
- rxsubchans = V4L2_TUNER_SUB_MONO
- | V4L2_TUNER_SUB_LANG1;
- break;
- case 2:
- case 10:
- rxsubchans = V4L2_TUNER_SUB_MONO
- | V4L2_TUNER_SUB_LANG1
- | V4L2_TUNER_SUB_LANG2;
- break;
- default:
- rxsubchans = V4L2_TUNER_SUB_MONO;
- break;
- }
- newnicam=1;
- } else {
- newnicam = 0;
- rxsubchans = V4L2_TUNER_SUB_MONO;
- }
- break;
- case MSP_MODE_BTSC:
- val = msp_read_dem(client, 0x200);
- msp_dbg2("status=0x%x (pri=%s, sec=%s, %s%s%s)\n",
- val,
- (val & 0x0002) ? "no" : "yes",
- (val & 0x0004) ? "no" : "yes",
- (val & 0x0040) ? "stereo" : "mono",
- (val & 0x0080) ? ", nicam 2nd mono" : "",
- (val & 0x0100) ? ", bilingual/SAP" : "");
- rxsubchans = V4L2_TUNER_SUB_MONO;
- if (val & 0x0040) rxsubchans |= V4L2_TUNER_SUB_STEREO;
- if (val & 0x0100) rxsubchans |= V4L2_TUNER_SUB_LANG1;
- break;
- }
- if (rxsubchans != state->rxsubchans) {
- update = 1;
- msp_dbg1("watch: rxsubchans %d => %d\n",
- state->rxsubchans,rxsubchans);
- state->rxsubchans = rxsubchans;
- }
- if (newnicam != state->nicam_on) {
- update = 1;
- msp_dbg1("watch: nicam %d => %d\n",
- state->nicam_on,newnicam);
- state->nicam_on = newnicam;
- }
- return update;
-}
-
-/*
- * A kernel thread for msp3400 control -- we don't want to block the
- * in the ioctl while doing the sound carrier & stereo detect
- */
-
-static int msp_sleep(struct msp_state *state, int timeout)
-{
- DECLARE_WAITQUEUE(wait, current);
-
- add_wait_queue(&state->wq, &wait);
- if (!kthread_should_stop()) {
- if (timeout < 0) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule();
- } else {
- schedule_timeout_interruptible
- (msecs_to_jiffies(timeout));
- }
- }
-
- remove_wait_queue(&state->wq, &wait);
- try_to_freeze();
- return state->restart;
-}
-
-/* stereo/multilang monitoring */
-static void watch_stereo(struct i2c_client *client)
-{
- struct msp_state *state = i2c_get_clientdata(client);
-
- if (autodetect_stereo(client)) {
- if (state->stereo & V4L2_TUNER_MODE_STEREO)
- msp3400c_setstereo(client, V4L2_TUNER_MODE_STEREO);
- else if (state->stereo & VIDEO_SOUND_LANG1)
- msp3400c_setstereo(client, V4L2_TUNER_MODE_LANG1);
- else
- msp3400c_setstereo(client, V4L2_TUNER_MODE_MONO);
- }
-
- if (once)
- state->watch_stereo = 0;
-}
-
-
-static int msp3400c_thread(void *data)
-{
- struct i2c_client *client = data;
- struct msp_state *state = i2c_get_clientdata(client);
- struct msp3400c_carrier_detect *cd;
- int count, max1,max2,val1,val2, val,this;
-
-
- msp_info("msp3400 daemon started\n");
- for (;;) {
- msp_dbg2("msp3400 thread: sleep\n");
- msp_sleep(state, -1);
- msp_dbg2("msp3400 thread: wakeup\n");
-
- restart:
- msp_dbg1("thread: restart scan\n");
- state->restart = 0;
- if (kthread_should_stop())
- break;
-
- if (VIDEO_MODE_RADIO == state->norm ||
- MSP_MODE_EXTERN == state->mode) {
- /* no carrier scan, just unmute */
- msp_info("thread: no carrier scan\n");
- msp_set_audio(client);
- continue;
- }
-
- /* mute */
- msp_set_mute(client);
- msp3400c_setmode(client, MSP_MODE_AM_DETECT /* +1 */ );
- val1 = val2 = 0;
- max1 = max2 = -1;
- state->watch_stereo = 0;
-
- /* some time for the tuner to sync */
- if (msp_sleep(state,200))
- goto restart;
-
- /* carrier detect pass #1 -- main carrier */
- cd = msp3400c_carrier_detect_main;
- count = ARRAY_SIZE(msp3400c_carrier_detect_main);
-
- if (amsound && (state->norm == VIDEO_MODE_SECAM)) {
- /* autodetect doesn't work well with AM ... */
- max1 = 3;
- count = 0;
- msp_dbg1("AM sound override\n");
- }
-
- for (this = 0; this < count; this++) {
- msp3400c_setcarrier(client, cd[this].cdo,cd[this].cdo);
- if (msp_sleep(state,100))
- goto restart;
- val = msp_read_dsp(client, 0x1b);
- if (val > 32767)
- val -= 65536;
- if (val1 < val)
- val1 = val, max1 = this;
- msp_dbg1("carrier1 val: %5d / %s\n", val,cd[this].name);
- }
-
- /* carrier detect pass #2 -- second (stereo) carrier */
- switch (max1) {
- case 1: /* 5.5 */
- cd = msp3400c_carrier_detect_55;
- count = ARRAY_SIZE(msp3400c_carrier_detect_55);
- break;
- case 3: /* 6.5 */
- cd = msp3400c_carrier_detect_65;
- count = ARRAY_SIZE(msp3400c_carrier_detect_65);
- break;
- case 0: /* 4.5 */
- case 2: /* 6.0 */
- default:
- cd = NULL;
- count = 0;
- break;
- }
-
- if (amsound && (state->norm == VIDEO_MODE_SECAM)) {
- /* autodetect doesn't work well with AM ... */
- cd = NULL;
- count = 0;
- max2 = 0;
- }
- for (this = 0; this < count; this++) {
- msp3400c_setcarrier(client, cd[this].cdo,cd[this].cdo);
- if (msp_sleep(state,100))
- goto restart;
- val = msp_read_dsp(client, 0x1b);
- if (val > 32767)
- val -= 65536;
- if (val2 < val)
- val2 = val, max2 = this;
- msp_dbg1("carrier2 val: %5d / %s\n", val,cd[this].name);
- }
-
- /* program the msp3400 according to the results */
- state->main = msp3400c_carrier_detect_main[max1].cdo;
- switch (max1) {
- case 1: /* 5.5 */
- if (max2 == 0) {
- /* B/G FM-stereo */
- state->second = msp3400c_carrier_detect_55[max2].cdo;
- msp3400c_setmode(client, MSP_MODE_FM_TERRA);
- state->nicam_on = 0;
- msp3400c_setstereo(client, V4L2_TUNER_MODE_MONO);
- state->watch_stereo = 1;
- } else if (max2 == 1 && HAVE_NICAM(state)) {
- /* B/G NICAM */
- state->second = msp3400c_carrier_detect_55[max2].cdo;
- msp3400c_setmode(client, MSP_MODE_FM_NICAM1);
- state->nicam_on = 1;
- msp3400c_setcarrier(client, state->second, state->main);
- state->watch_stereo = 1;
- } else {
- goto no_second;
- }
- break;
- case 2: /* 6.0 */
- /* PAL I NICAM */
- state->second = MSP_CARRIER(6.552);
- msp3400c_setmode(client, MSP_MODE_FM_NICAM2);
- state->nicam_on = 1;
- msp3400c_setcarrier(client, state->second, state->main);
- state->watch_stereo = 1;
- break;
- case 3: /* 6.5 */
- if (max2 == 1 || max2 == 2) {
- /* D/K FM-stereo */
- state->second = msp3400c_carrier_detect_65[max2].cdo;
- msp3400c_setmode(client, MSP_MODE_FM_TERRA);
- state->nicam_on = 0;
- msp3400c_setstereo(client, V4L2_TUNER_MODE_MONO);
- state->watch_stereo = 1;
- } else if (max2 == 0 &&
- state->norm == VIDEO_MODE_SECAM) {
- /* L NICAM or AM-mono */
- state->second = msp3400c_carrier_detect_65[max2].cdo;
- msp3400c_setmode(client, MSP_MODE_AM_NICAM);
- state->nicam_on = 0;
- msp3400c_setstereo(client, V4L2_TUNER_MODE_MONO);
- msp3400c_setcarrier(client, state->second, state->main);
- /* volume prescale for SCART (AM mono input) */
- msp_write_dsp(client, 0x000d, 0x1900);
- state->watch_stereo = 1;
- } else if (max2 == 0 && HAVE_NICAM(state)) {
- /* D/K NICAM */
- state->second = msp3400c_carrier_detect_65[max2].cdo;
- msp3400c_setmode(client, MSP_MODE_FM_NICAM1);
- state->nicam_on = 1;
- msp3400c_setcarrier(client, state->second, state->main);
- state->watch_stereo = 1;
- } else {
- goto no_second;
- }
- break;
- case 0: /* 4.5 */
- default:
- no_second:
- state->second = msp3400c_carrier_detect_main[max1].cdo;
- msp3400c_setmode(client, MSP_MODE_FM_TERRA);
- state->nicam_on = 0;
- msp3400c_setcarrier(client, state->second, state->main);
- state->rxsubchans = V4L2_TUNER_SUB_MONO;
- msp3400c_setstereo(client, V4L2_TUNER_MODE_MONO);
- break;
- }
-
- /* unmute */
- msp_set_audio(client);
- msp3400c_restore_dfp(client);
-
- if (debug)
- msp3400c_print_mode(client);
-
- /* monitor tv audio mode */
- while (state->watch_stereo) {
- if (msp_sleep(state,5000))
- goto restart;
- watch_stereo(client);
- }
- }
- msp_dbg1("thread: exit\n");
- return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-/* this one uses the automatic sound standard detection of newer */
-/* msp34xx chip versions */
-
-static struct MODES {
- int retval;
- int main, second;
- char *name;
-} modelist[] = {
- { 0x0000, 0, 0, "could not detect sound standard" },
- { 0x0001, 0, 0, "autodetect started" },
- { 0x0002, MSP_CARRIER(4.5), MSP_CARRIER(4.72), "4.5/4.72 M Dual FM-Stereo" },
- { 0x0003, MSP_CARRIER(5.5), MSP_CARRIER(5.7421875), "5.5/5.74 B/G Dual FM-Stereo" },
- { 0x0004, MSP_CARRIER(6.5), MSP_CARRIER(6.2578125), "6.5/6.25 D/K1 Dual FM-Stereo" },
- { 0x0005, MSP_CARRIER(6.5), MSP_CARRIER(6.7421875), "6.5/6.74 D/K2 Dual FM-Stereo" },
- { 0x0006, MSP_CARRIER(6.5), MSP_CARRIER(6.5), "6.5 D/K FM-Mono (HDEV3)" },
- { 0x0008, MSP_CARRIER(5.5), MSP_CARRIER(5.85), "5.5/5.85 B/G NICAM FM" },
- { 0x0009, MSP_CARRIER(6.5), MSP_CARRIER(5.85), "6.5/5.85 L NICAM AM" },
- { 0x000a, MSP_CARRIER(6.0), MSP_CARRIER(6.55), "6.0/6.55 I NICAM FM" },
- { 0x000b, MSP_CARRIER(6.5), MSP_CARRIER(5.85), "6.5/5.85 D/K NICAM FM" },
- { 0x000c, MSP_CARRIER(6.5), MSP_CARRIER(5.85), "6.5/5.85 D/K NICAM FM (HDEV2)" },
- { 0x0020, MSP_CARRIER(4.5), MSP_CARRIER(4.5), "4.5 M BTSC-Stereo" },
- { 0x0021, MSP_CARRIER(4.5), MSP_CARRIER(4.5), "4.5 M BTSC-Mono + SAP" },
- { 0x0030, MSP_CARRIER(4.5), MSP_CARRIER(4.5), "4.5 M EIA-J Japan Stereo" },
- { 0x0040, MSP_CARRIER(10.7), MSP_CARRIER(10.7), "10.7 FM-Stereo Radio" },
- { 0x0050, MSP_CARRIER(6.5), MSP_CARRIER(6.5), "6.5 SAT-Mono" },
- { 0x0051, MSP_CARRIER(7.02), MSP_CARRIER(7.20), "7.02/7.20 SAT-Stereo" },
- { 0x0060, MSP_CARRIER(7.2), MSP_CARRIER(7.2), "7.2 SAT ADR" },
- { -1, 0, 0, NULL }, /* EOF */
-};
-
-static inline const char *msp_standard_mode_name(int mode)
-{
- int i;
- for (i = 0; modelist[i].name != NULL; i++)
- if (modelist[i].retval == mode)
- return modelist[i].name;
- return "unknown";
-}
-
-static int msp_modus(struct i2c_client *client, int norm)
-{
- switch (norm) {
- case VIDEO_MODE_PAL:
- msp_dbg1("video mode selected to PAL\n");
-
-#if 1
- /* experimental: not sure this works with all chip versions */
- return 0x7003;
-#else
- /* previous value, try this if it breaks ... */
- return 0x1003;
-#endif
- case VIDEO_MODE_NTSC: /* BTSC */
- msp_dbg1("video mode selected to NTSC\n");
- return 0x2003;
- case VIDEO_MODE_SECAM:
- msp_dbg1("video mode selected to SECAM\n");
- return 0x0003;
- case VIDEO_MODE_RADIO:
- msp_dbg1("video mode selected to Radio\n");
- return 0x0003;
- case VIDEO_MODE_AUTO:
- msp_dbg1("video mode selected to Auto\n");
- return 0x2003;
- default:
- return 0x0003;
- }
-}
-
-static int msp_standard(int norm)
-{
- switch (norm) {
- case VIDEO_MODE_PAL:
- return 1;
- case VIDEO_MODE_NTSC: /* BTSC */
- return 0x0020;
- case VIDEO_MODE_SECAM:
- return 1;
- case VIDEO_MODE_RADIO:
- return 0x0040;
- default:
- return 1;
- }
-}
-
-static int msp3410d_thread(void *data)
-{
- struct i2c_client *client = data;
- struct msp_state *state = i2c_get_clientdata(client);
- int mode,val,i,std;
-
- msp_info("msp3410 daemon started\n");
-
- for (;;) {
- msp_dbg2("msp3410 thread: sleep\n");
- msp_sleep(state,-1);
- msp_dbg2("msp3410 thread: wakeup\n");
-
- restart:
- msp_dbg1("thread: restart scan\n");
- state->restart = 0;
- if (kthread_should_stop())
- break;
-
- if (state->mode == MSP_MODE_EXTERN) {
- /* no carrier scan needed, just unmute */
- msp_dbg1("thread: no carrier scan\n");
- msp_set_audio(client);
- continue;
- }
-
- /* put into sane state (and mute) */
- msp_reset(client);
-
- /* some time for the tuner to sync */
- if (msp_sleep(state,200))
- goto restart;
-
- /* start autodetect */
- mode = msp_modus(client, state->norm);
- std = msp_standard(state->norm);
- msp_write_dem(client, 0x30, mode);
- msp_write_dem(client, 0x20, std);
- state->watch_stereo = 0;
-
- if (debug)
- msp_dbg1("setting mode: %s (0x%04x)\n",
- msp_standard_mode_name(std) ,std);
-
- if (std != 1) {
- /* programmed some specific mode */
- val = std;
- } else {
- /* triggered autodetect */
- for (;;) {
- if (msp_sleep(state,100))
- goto restart;
-
- /* check results */
- val = msp_read_dem(client, 0x7e);
- if (val < 0x07ff)
- break;
- msp_dbg1("detection still in progress\n");
- }
- }
- for (i = 0; modelist[i].name != NULL; i++)
- if (modelist[i].retval == val)
- break;
- msp_dbg1("current mode: %s (0x%04x)\n",
- modelist[i].name ? modelist[i].name : "unknown",
- val);
- state->main = modelist[i].main;
- state->second = modelist[i].second;
-
- if (amsound && (state->norm == VIDEO_MODE_SECAM) && (val != 0x0009)) {
- /* autodetection has failed, let backup */
- msp_dbg1("autodetection failed,"
- " switching to backup mode: %s (0x%04x)\n",
- modelist[8].name ? modelist[8].name : "unknown",val);
- val = 0x0009;
- msp_write_dem(client, 0x20, val);
- }
-
- /* set various prescales */
- msp_write_dsp(client, 0x0d, 0x1900); /* scart */
- msp_write_dsp(client, 0x0e, 0x2403); /* FM */
- msp_write_dsp(client, 0x10, 0x5a00); /* nicam */
-
- /* set stereo */
- switch (val) {
- case 0x0008: /* B/G NICAM */
- case 0x000a: /* I NICAM */
- if (val == 0x0008)
- state->mode = MSP_MODE_FM_NICAM1;
- else
- state->mode = MSP_MODE_FM_NICAM2;
- /* just turn on stereo */
- state->rxsubchans = V4L2_TUNER_SUB_STEREO;
- state->nicam_on = 1;
- state->watch_stereo = 1;
- msp3400c_setstereo(client,V4L2_TUNER_MODE_STEREO);
- break;
- case 0x0009:
- state->mode = MSP_MODE_AM_NICAM;
- state->rxsubchans = V4L2_TUNER_SUB_MONO;
- state->nicam_on = 1;
- msp3400c_setstereo(client,V4L2_TUNER_MODE_MONO);
- state->watch_stereo = 1;
- break;
- case 0x0020: /* BTSC */
- /* just turn on stereo */
- state->mode = MSP_MODE_BTSC;
- state->rxsubchans = V4L2_TUNER_SUB_STEREO;
- state->nicam_on = 0;
- state->watch_stereo = 1;
- msp3400c_setstereo(client,V4L2_TUNER_MODE_STEREO);
- break;
- case 0x0040: /* FM radio */
- state->mode = MSP_MODE_FM_RADIO;
- state->rxsubchans = V4L2_TUNER_SUB_STEREO;
- state->audmode = V4L2_TUNER_MODE_STEREO;
- state->nicam_on = 0;
- state->watch_stereo = 0;
- /* not needed in theory if HAVE_RADIO(), but
- short programming enables carrier mute */
- msp3400c_setmode(client,MSP_MODE_FM_RADIO);
- msp3400c_setcarrier(client, MSP_CARRIER(10.7),
- MSP_CARRIER(10.7));
- /* scart routing */
- msp_set_scart(client,SCART_IN2,0);
- /* msp34xx does radio decoding */
- msp_write_dsp(client, 0x08, 0x0020);
- msp_write_dsp(client, 0x09, 0x0020);
- msp_write_dsp(client, 0x0b, 0x0020);
- break;
- case 0x0003:
- case 0x0004:
- case 0x0005:
- state->mode = MSP_MODE_FM_TERRA;
- state->rxsubchans = V4L2_TUNER_SUB_MONO;
- state->audmode = V4L2_TUNER_MODE_MONO;
- state->nicam_on = 0;
- state->watch_stereo = 1;
- break;
- }
-
- /* unmute, restore misc registers */
- msp_set_audio(client);
- msp_write_dsp(client, 0x13, state->acb);
- msp_write_dem(client, 0x40, state->i2s_mode);
- msp3400c_restore_dfp(client);
-
- /* monitor tv audio mode */
- while (state->watch_stereo) {
- if (msp_sleep(state,5000))
- goto restart;
- watch_stereo(client);
- }
- }
- msp_dbg1("thread: exit\n");
- return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-/* msp34xxG + (autoselect no-thread) */
-/* this one uses both automatic standard detection and automatic sound */
-/* select which are available in the newer G versions */
-/* struct msp: only norm, acb and source are really used in this mode */
-
-/* set the same 'source' for the loudspeaker, scart and quasi-peak detector
- * the value for source is the same as bit 15:8 of DFP registers 0x08,
- * 0x0a and 0x0c: 0=mono, 1=stereo or A|B, 2=SCART, 3=stereo or A, 4=stereo or B
- *
- * this function replaces msp3400c_setstereo
- */
-static void msp34xxg_set_source(struct i2c_client *client, int source)
-{
- struct msp_state *state = i2c_get_clientdata(client);
-
- /* fix matrix mode to stereo and let the msp choose what
- * to output according to 'source', as recommended
- * for MONO (source==0) downmixing set bit[7:0] to 0x30
- */
- int value = (source & 0x07) << 8 | (source == 0 ? 0x30 : 0x20);
-
- msp_dbg1("set source to %d (0x%x)\n", source, value);
- /* Loudspeaker Output */
- msp_write_dsp(client, 0x08, value);
- /* SCART1 DA Output */
- msp_write_dsp(client, 0x0a, value);
- /* Quasi-peak detector */
- msp_write_dsp(client, 0x0c, value);
- /*
- * set identification threshold. Personally, I
- * I set it to a higher value that the default
- * of 0x190 to ignore noisy stereo signals.
- * this needs tuning. (recommended range 0x00a0-0x03c0)
- * 0x7f0 = forced mono mode
- */
- /* a2 threshold for stereo/bilingual */
- msp_write_dem(client, 0x22, stereo_threshold);
- state->source = source;
-}
-
-/* (re-)initialize the msp34xxg, according to the current norm in state->norm
- * return 0 if it worked, -1 if it failed
- */
-static int msp34xxg_reset(struct i2c_client *client)
-{
- struct msp_state *state = i2c_get_clientdata(client);
- int modus, std;
-
- if (msp_reset(client))
- return -1;
-
- /* make sure that input/output is muted (paranoid mode) */
- /* ACB, mute DSP input, mute SCART 1 */
- if (msp_write_dsp(client, 0x13, 0x0f20))
- return -1;
-
- msp_write_dem(client, 0x40, state->i2s_mode);
-
- /* step-by-step initialisation, as described in the manual */
- modus = msp_modus(client, state->norm);
- std = msp_standard(state->norm);
- modus &= ~0x03; /* STATUS_CHANGE = 0 */
- modus |= 0x01; /* AUTOMATIC_SOUND_DETECTION = 1 */
- if (msp_write_dem(client, 0x30, modus))
- return -1;
- if (msp_write_dem(client, 0x20, std))
- return -1;
-
- /* write the dfps that may have an influence on
- standard/audio autodetection right now */
- msp34xxg_set_source(client, state->source);
-
- /* AM/FM Prescale, default: [15:8] 75khz deviation */
- if (msp34xxg_write_dfp_with_default(client, 0x0e, 0x3000))
- return -1;
-
- /* NICAM Prescale, default: 9db gain (as recommended) */
- if (msp34xxg_write_dfp_with_default(client, 0x10, 0x5a00))
- return -1;
-
- return 0;
-}
-
-static int msp34xxg_thread(void *data)
-{
- struct i2c_client *client = data;
- struct msp_state *state = i2c_get_clientdata(client);
- int val, std, i;
-
- msp_info("msp34xxg daemon started\n");
-
- state->source = 1; /* default */
- for (;;) {
- msp_dbg2("msp34xxg thread: sleep\n");
- msp_sleep(state, -1);
- msp_dbg2("msp34xxg thread: wakeup\n");
-
- restart:
- msp_dbg1("thread: restart scan\n");
- state->restart = 0;
- if (kthread_should_stop())
- break;
-
- /* setup the chip*/
- msp34xxg_reset(client);
- std = standard;
- if (std != 0x01)
- goto unmute;
-
- /* watch autodetect */
- msp_dbg1("triggered autodetect, waiting for result\n");
- for (i = 0; i < 10; i++) {
- if (msp_sleep(state, 100))
- goto restart;
-
- /* check results */
- val = msp_read_dem(client, 0x7e);
- if (val < 0x07ff) {
- std = val;
- break;
- }
- msp_dbg1("detection still in progress\n");
- }
- if (std == 1) {
- msp_dbg1("detection still in progress after 10 tries. giving up.\n");
- continue;
- }
-
- unmute:
- state->mode = std;
- msp_dbg1("current mode: %s (0x%04x)\n",
- msp_standard_mode_name(std), std);
-
- /* unmute: dispatch sound to scart output, set scart volume */
- msp_set_audio(client);
-
- /* restore ACB */
- if (msp_write_dsp(client, 0x13, state->acb))
- return -1;
-
- msp_write_dem(client, 0x40, state->i2s_mode);
- }
- msp_dbg1("thread: exit\n");
- return 0;
-}
-
-static void msp34xxg_detect_stereo(struct i2c_client *client)
-{
- struct msp_state *state = i2c_get_clientdata(client);
-
- int status = msp_read_dem(client, 0x0200);
- int is_bilingual = status & 0x100;
- int is_stereo = status & 0x40;
-
- state->rxsubchans = 0;
- if (is_stereo)
- state->rxsubchans |= V4L2_TUNER_SUB_STEREO;
- else
- state->rxsubchans |= V4L2_TUNER_SUB_MONO;
- if (is_bilingual) {
- state->rxsubchans |= V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
- /* I'm supposed to check whether it's SAP or not
- * and set only LANG2/SAP in this case. Yet, the MSP
- * does a lot of work to hide this and handle everything
- * the same way. I don't want to work around it so unless
- * this is a problem, I'll handle SAP just like lang1/lang2.
- */
- }
- msp_dbg1("status=0x%x, stereo=%d, bilingual=%d -> rxsubchans=%d\n",
- status, is_stereo, is_bilingual, state->rxsubchans);
-}
-
-static void msp34xxg_set_audmode(struct i2c_client *client, int audmode)
-{
- struct msp_state *state = i2c_get_clientdata(client);
- int source;
-
- switch (audmode) {
- case V4L2_TUNER_MODE_MONO:
- source = 0; /* mono only */
- break;
- case V4L2_TUNER_MODE_STEREO:
- source = 1; /* stereo or A|B, see comment in msp34xxg_get_v4l2_stereo() */
- /* problem: that could also mean 2 (scart input) */
- break;
- case V4L2_TUNER_MODE_LANG1:
- source = 3; /* stereo or A */
- break;
- case V4L2_TUNER_MODE_LANG2:
- source = 4; /* stereo or B */
- break;
- default:
- audmode = 0;
- source = 1;
- break;
- }
- state->audmode = audmode;
- msp34xxg_set_source(client, source);
-}
-
-
-/* ----------------------------------------------------------------------- */
-
-static void msp_wake_thread(struct i2c_client *client)
-{
- struct msp_state *state = i2c_get_clientdata(client);
-
- if (NULL == state->kthread)
- return;
- msp_set_mute(client);
- state->watch_stereo = 0;
- state->restart = 1;
- wake_up_interruptible(&state->wq);
-}
-
-/* ----------------------------------------------------------------------- */
-
-static int mode_v4l2_to_v4l1(int rxsubchans)
-{
- int mode = 0;
-
- if (rxsubchans & V4L2_TUNER_SUB_STEREO)
- mode |= VIDEO_SOUND_STEREO;
- if (rxsubchans & V4L2_TUNER_SUB_LANG2)
- mode |= VIDEO_SOUND_LANG2;
- if (rxsubchans & V4L2_TUNER_SUB_LANG1)
- mode |= VIDEO_SOUND_LANG1;
- if (mode == 0)
- mode |= VIDEO_SOUND_MONO;
- return mode;
-}
-
-static int mode_v4l1_to_v4l2(int mode)
-{
- if (mode & VIDEO_SOUND_STEREO)
- return V4L2_TUNER_MODE_STEREO;
- if (mode & VIDEO_SOUND_LANG2)
- return V4L2_TUNER_MODE_LANG2;
- if (mode & VIDEO_SOUND_LANG1)
- return V4L2_TUNER_MODE_LANG1;
- return V4L2_TUNER_MODE_MONO;
-}
-
-static void msp_any_detect_stereo(struct i2c_client *client)
-{
- struct msp_state *state = i2c_get_clientdata(client);
-
- switch (state->opmode) {
- case OPMODE_MANUAL:
- case OPMODE_AUTODETECT:
- autodetect_stereo(client);
- break;
- case OPMODE_AUTOSELECT:
- msp34xxg_detect_stereo(client);
- break;
- }
-}
-
-static struct v4l2_queryctrl msp_qctrl[] = {
- {
- .id = V4L2_CID_AUDIO_VOLUME,
- .name = "Volume",
- .minimum = 0,
- .maximum = 65535,
- .step = 65535/100,
- .default_value = 58880,
- .flags = 0,
- .type = V4L2_CTRL_TYPE_INTEGER,
- },{
- .id = V4L2_CID_AUDIO_MUTE,
- .name = "Mute",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 1,
- .flags = 0,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- },{
- .id = V4L2_CID_AUDIO_BASS,
- .name = "Bass",
- .minimum = 0,
- .maximum = 65535,
- .step = 65535/100,
- .default_value = 32768,
- .type = V4L2_CTRL_TYPE_INTEGER,
- },{
- .id = V4L2_CID_AUDIO_TREBLE,
- .name = "Treble",
- .minimum = 0,
- .maximum = 65535,
- .step = 65535/100,
- .default_value = 32768,
- .type = V4L2_CTRL_TYPE_INTEGER,
- },
-};
-
-
-static void msp_any_set_audmode(struct i2c_client *client, int audmode)
-{
- struct msp_state *state = i2c_get_clientdata(client);
-
- switch (state->opmode) {
- case OPMODE_MANUAL:
- case OPMODE_AUTODETECT:
- state->watch_stereo = 0;
- msp3400c_setstereo(client, audmode);
- break;
- case OPMODE_AUTOSELECT:
- msp34xxg_set_audmode(client, audmode);
- break;
- }
-}
-
-static int msp_get_ctrl(struct i2c_client *client, struct v4l2_control *ctrl)
-{
- struct msp_state *state = i2c_get_clientdata(client);
-
- switch (ctrl->id) {
- case V4L2_CID_AUDIO_MUTE:
- ctrl->value = state->muted;
- break;
-
- case V4L2_CID_AUDIO_BALANCE:
- ctrl->value = state->balance;
- break;
-
- case V4L2_CID_AUDIO_BASS:
- ctrl->value = state->bass;
- break;
-
- case V4L2_CID_AUDIO_TREBLE:
- ctrl->value = state->treble;
- break;
-
- case V4L2_CID_AUDIO_VOLUME:
- ctrl->value = state->volume;
- break;
-
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-static int msp_set_ctrl(struct i2c_client *client, struct v4l2_control *ctrl)
-{
- struct msp_state *state = i2c_get_clientdata(client);
-
- switch (ctrl->id) {
- case V4L2_CID_AUDIO_MUTE:
- if (ctrl->value < 0 || ctrl->value >= 2)
- return -ERANGE;
- state->muted = ctrl->value;
- break;
-
- case V4L2_CID_AUDIO_BASS:
- state->bass = ctrl->value;
- break;
-
- case V4L2_CID_AUDIO_TREBLE:
- state->treble = ctrl->value;
- break;
-
- case V4L2_CID_AUDIO_BALANCE:
- state->balance = ctrl->value;
- break;
-
- case V4L2_CID_AUDIO_VOLUME:
- state->volume = ctrl->value;
- if (state->volume == 0)
- state->balance = 32768;
- break;
-
- default:
- return -EINVAL;
- }
- msp_set_audio(client);
- return 0;
-}
-
-static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg)
-{
- struct msp_state *state = i2c_get_clientdata(client);
- u16 *sarg = arg;
- int scart = 0;
-
- if (debug >= 2)
- v4l_i2c_print_ioctl(client, cmd);
-
- switch (cmd) {
- case AUDC_SET_INPUT:
- if (*sarg == state->input)
- break;
- state->input = *sarg;
- switch (*sarg) {
- case AUDIO_RADIO:
- /* Hauppauge uses IN2 for the radio */
- state->mode = MSP_MODE_FM_RADIO;
- scart = SCART_IN2;
- break;
- case AUDIO_EXTERN_1:
- /* IN1 is often used for external input ... */
- state->mode = MSP_MODE_EXTERN;
- scart = SCART_IN1;
- break;
- case AUDIO_EXTERN_2:
- /* ... sometimes it is IN2 through ;) */
- state->mode = MSP_MODE_EXTERN;
- scart = SCART_IN2;
- break;
- case AUDIO_TUNER:
- state->mode = -1;
- break;
- default:
- if (*sarg & AUDIO_MUTE)
- msp_set_scart(client, SCART_MUTE, 0);
- break;
- }
- if (scart) {
- state->rxsubchans = V4L2_TUNER_SUB_STEREO;
- state->audmode = V4L2_TUNER_MODE_STEREO;
- msp_set_scart(client, scart, 0);
- msp_write_dsp(client, 0x000d, 0x1900);
- if (state->opmode != OPMODE_AUTOSELECT)
- msp3400c_setstereo(client, state->audmode);
- }
- msp_wake_thread(client);
- break;
-
- case AUDC_SET_RADIO:
- state->norm = VIDEO_MODE_RADIO;
- msp_dbg1("switching to radio mode\n");
- state->watch_stereo = 0;
- switch (state->opmode) {
- case OPMODE_MANUAL:
- /* set msp3400 to FM radio mode */
- msp3400c_setmode(client, MSP_MODE_FM_RADIO);
- msp3400c_setcarrier(client, MSP_CARRIER(10.7),
- MSP_CARRIER(10.7));
- msp_set_audio(client);
- break;
- case OPMODE_AUTODETECT:
- case OPMODE_AUTOSELECT:
- /* the thread will do for us */
- msp_wake_thread(client);
- break;
- }
- break;
- /* work-in-progress: hook to control the DFP registers */
- case MSP_SET_DFPREG:
- {
- struct msp_dfpreg *r = arg;
- int i;
-
- if (r->reg < 0 || r->reg >= DFP_COUNT)
- return -EINVAL;
- for (i = 0; i < sizeof(bl_dfp) / sizeof(int); i++)
- if (r->reg == bl_dfp[i])
- return -EINVAL;
- state->dfp_regs[r->reg] = r->value;
- msp_write_dsp(client, r->reg, r->value);
- return 0;
- }
-
- case MSP_GET_DFPREG:
- {
- struct msp_dfpreg *r = arg;
-
- if (r->reg < 0 || r->reg >= DFP_COUNT)
- return -EINVAL;
- r->value = msp_read_dsp(client, r->reg);
- return 0;
- }
-
- /* --- v4l ioctls --- */
- /* take care: bttv does userspace copying, we'll get a
- kernel pointer here... */
- case VIDIOCGAUDIO:
- {
- struct video_audio *va = arg;
-
- va->flags |= VIDEO_AUDIO_VOLUME |
- VIDEO_AUDIO_BASS |
- VIDEO_AUDIO_TREBLE |
- VIDEO_AUDIO_MUTABLE;
- if (state->muted)
- va->flags |= VIDEO_AUDIO_MUTE;
-
- if (state->muted)
- va->flags |= VIDEO_AUDIO_MUTE;
- va->volume = state->volume;
- va->balance = state->volume ? state->balance : 32768;
- va->bass = state->bass;
- va->treble = state->treble;
-
- msp_any_detect_stereo(client);
- va->mode = mode_v4l2_to_v4l1(state->rxsubchans);
- break;
- }
-
- case VIDIOCSAUDIO:
- {
- struct video_audio *va = arg;
-
- state->muted = (va->flags & VIDEO_AUDIO_MUTE);
- state->volume = va->volume;
- state->balance = va->balance;
- state->bass = va->bass;
- state->treble = va->treble;
- msp_set_audio(client);
-
- if (va->mode != 0 && state->norm != VIDEO_MODE_RADIO)
- msp_any_set_audmode(client,mode_v4l1_to_v4l2(va->mode));
- break;
- }
-
- case VIDIOCSCHAN:
- {
- struct video_channel *vc = arg;
-
- state->norm = vc->norm;
- msp_wake_thread(client);
- break;
- }
-
- case VIDIOCSFREQ:
- case VIDIOC_S_FREQUENCY:
- {
- /* new channel -- kick audio carrier scan */
- msp_wake_thread(client);
- break;
- }
-
- /* msp34xx specific */
- case MSP_SET_MATRIX:
- {
- struct msp_matrix *mspm = arg;
-
- msp_set_scart(client, mspm->input, mspm->output);
- break;
- }
-
- /* --- v4l2 ioctls --- */
- case VIDIOC_S_STD:
- {
- v4l2_std_id *id = arg;
-
- /*FIXME: use V4L2 mode flags on msp3400 instead of V4L1*/
- if (*id & V4L2_STD_PAL) {
- state->norm = VIDEO_MODE_PAL;
- } else if (*id & V4L2_STD_SECAM) {
- state->norm = VIDEO_MODE_SECAM;
- } else {
- state->norm = VIDEO_MODE_NTSC;
- }
-
- msp_wake_thread(client);
- return 0;
- }
-
- case VIDIOC_ENUMINPUT:
- {
- struct v4l2_input *i = arg;
-
- if (i->index != 0)
- return -EINVAL;
-
- i->type = V4L2_INPUT_TYPE_TUNER;
- switch (i->index) {
- case AUDIO_RADIO:
- strcpy(i->name, "Radio");
- break;
- case AUDIO_EXTERN_1:
- strcpy(i->name, "Extern 1");
- break;
- case AUDIO_EXTERN_2:
- strcpy(i->name, "Extern 2");
- break;
- case AUDIO_TUNER:
- strcpy(i->name, "Television");
- break;
- default:
- return -EINVAL;
- }
- return 0;
- }
-
- case VIDIOC_G_AUDIO:
- {
- struct v4l2_audio *a = arg;
-
- memset(a, 0, sizeof(*a));
-
- switch (a->index) {
- case AUDIO_RADIO:
- strcpy(a->name, "Radio");
- break;
- case AUDIO_EXTERN_1:
- strcpy(a->name, "Extern 1");
- break;
- case AUDIO_EXTERN_2:
- strcpy(a->name, "Extern 2");
- break;
- case AUDIO_TUNER:
- strcpy(a->name, "Television");
- break;
- default:
- return -EINVAL;
- }
-
- msp_any_detect_stereo(client);
- if (state->audmode == V4L2_TUNER_MODE_STEREO) {
- a->capability = V4L2_AUDCAP_STEREO;
- }
-
- break;
- }
-
- case VIDIOC_S_AUDIO:
- {
- struct v4l2_audio *sarg = arg;
-
- switch (sarg->index) {
- case AUDIO_RADIO:
- /* Hauppauge uses IN2 for the radio */
- state->mode = MSP_MODE_FM_RADIO;
- scart = SCART_IN2;
- break;
- case AUDIO_EXTERN_1:
- /* IN1 is often used for external input ... */
- state->mode = MSP_MODE_EXTERN;
- scart = SCART_IN1;
- break;
- case AUDIO_EXTERN_2:
- /* ... sometimes it is IN2 through ;) */
- state->mode = MSP_MODE_EXTERN;
- scart = SCART_IN2;
- break;
- case AUDIO_TUNER:
- state->mode = -1;
- break;
- }
- if (scart) {
- state->rxsubchans = V4L2_TUNER_SUB_STEREO;
- state->audmode = V4L2_TUNER_MODE_STEREO;
- msp_set_scart(client, scart, 0);
- msp_write_dsp(client, 0x000d, 0x1900);
- }
- if (sarg->capability == V4L2_AUDCAP_STEREO) {
- state->audmode = V4L2_TUNER_MODE_STEREO;
- } else {
- state->audmode &= ~V4L2_TUNER_MODE_STEREO;
- }
- msp_any_set_audmode(client, state->audmode);
- msp_wake_thread(client);
- break;
- }
-
- case VIDIOC_G_TUNER:
- {
- struct v4l2_tuner *vt = arg;
-
- msp_any_detect_stereo(client);
- vt->audmode = state->audmode;
- vt->rxsubchans = state->rxsubchans;
- vt->capability = V4L2_TUNER_CAP_STEREO |
- V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2;
- break;
- }
-
- case VIDIOC_S_TUNER:
- {
- struct v4l2_tuner *vt = (struct v4l2_tuner *)arg;
-
- /* only set audmode */
- if (vt->audmode != -1 && vt->audmode != 0)
- msp_any_set_audmode(client, vt->audmode);
- break;
- }
-
- case VIDIOC_G_AUDOUT:
- {
- struct v4l2_audioout *a = (struct v4l2_audioout *)arg;
- int idx = a->index;
-
- memset(a, 0, sizeof(*a));
-
- switch (idx) {
- case 0:
- strcpy(a->name, "Scart1 Out");
- break;
- case 1:
- strcpy(a->name, "Scart2 Out");
- break;
- case 2:
- strcpy(a->name, "I2S Out");
- break;
- default:
- return -EINVAL;
- }
- break;
-
- }
-
- case VIDIOC_S_AUDOUT:
- {
- struct v4l2_audioout *a = (struct v4l2_audioout *)arg;
-
- if (a->index < 0 || a->index > 2)
- return -EINVAL;
-
- msp_dbg1("Setting audio out on msp34xx to input %i\n", a->index);
- msp_set_scart(client, state->in_scart, a->index + 1);
-
- break;
- }
-
- case VIDIOC_INT_I2S_CLOCK_FREQ:
- {
- u32 *a = (u32 *)arg;
-
- msp_dbg1("Setting I2S speed to %d\n", *a);
-
- switch (*a) {
- case 1024000:
- state->i2s_mode = 0;
- break;
- case 2048000:
- state->i2s_mode = 1;
- break;
- default:
- return -EINVAL;
- }
- break;
- }
-
- case VIDIOC_QUERYCTRL:
- {
- struct v4l2_queryctrl *qc = arg;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(msp_qctrl); i++)
- if (qc->id && qc->id == msp_qctrl[i].id) {
- memcpy(qc, &msp_qctrl[i], sizeof(*qc));
- return 0;
- }
- return -EINVAL;
- }
-
- case VIDIOC_G_CTRL:
- return msp_get_ctrl(client, arg);
-
- case VIDIOC_S_CTRL:
- return msp_set_ctrl(client, arg);
-
- case VIDIOC_LOG_STATUS:
- msp_any_detect_stereo(client);
- msp_info("%s rev1 = 0x%04x rev2 = 0x%04x\n",
- client->name, state->rev1, state->rev2);
- msp_info("Audio: volume %d balance %d bass %d treble %d%s\n",
- state->volume, state->balance,
- state->bass, state->treble,
- state->muted ? " (muted)" : "");
- msp_info("Mode: %s (%s%s)\n", msp_standard_mode_name(state->mode),
- (state->rxsubchans & V4L2_TUNER_SUB_STEREO) ? "stereo" : "mono",
- (state->rxsubchans & V4L2_TUNER_SUB_LANG2) ? ", dual" : "");
- msp_info("ACB: 0x%04x\n", state->acb);
- break;
-
- default:
- /* nothing */
- break;
- }
- return 0;
-}
-
-static int msp_suspend(struct device * dev, pm_message_t state)
-{
- struct i2c_client *client = container_of(dev, struct i2c_client, dev);
-
- msp_dbg1("suspend\n");
- msp_reset(client);
- return 0;
-}
-
-static int msp_resume(struct device * dev)
-{
- struct i2c_client *client = container_of(dev, struct i2c_client, dev);
-
- msp_dbg1("resume\n");
- msp_wake_thread(client);
- return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static struct i2c_driver i2c_driver;
-
-static int msp_attach(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client *client;
- struct msp_state *state;
- int (*thread_func)(void *data) = NULL;
- int i;
-
- client = kmalloc(sizeof(*client), GFP_KERNEL);
- if (client == NULL)
- return -ENOMEM;
- memset(client, 0, sizeof(*client));
- client->addr = address;
- client->adapter = adapter;
- client->driver = &i2c_driver;
- client->flags = I2C_CLIENT_ALLOW_USE;
- snprintf(client->name, sizeof(client->name) - 1, "msp3400");
-
- if (msp_reset(client) == -1) {
- msp_dbg1("msp3400 not found\n");
- kfree(client);
- return -1;
- }
-
- state = kmalloc(sizeof(*state), GFP_KERNEL);
- if (state == NULL) {
- kfree(client);
- return -ENOMEM;
- }
- i2c_set_clientdata(client, state);
-
- memset(state, 0, sizeof(*state));
- state->norm = VIDEO_MODE_NTSC;
- state->volume = 58880; /* 0db gain */
- state->balance = 32768; /* 0db gain */
- state->bass = 32768;
- state->treble = 32768;
- state->input = -1;
- state->muted = 0;
- state->i2s_mode = 0;
- for (i = 0; i < DFP_COUNT; i++)
- state->dfp_regs[i] = -1;
- init_waitqueue_head(&state->wq);
-
- state->rev1 = msp_read_dsp(client, 0x1e);
- if (state->rev1 != -1)
- state->rev2 = msp_read_dsp(client, 0x1f);
- msp_dbg1("rev1=0x%04x, rev2=0x%04x\n", state->rev1, state->rev2);
- if (state->rev1 == -1 || (state->rev1 == 0 && state->rev2 == 0)) {
- msp_dbg1("error while reading chip version\n");
- kfree(state);
- kfree(client);
- return -1;
- }
-
- msp_set_audio(client);
-
- snprintf(client->name, sizeof(client->name), "MSP%c4%02d%c-%c%d",
- ((state->rev1 >> 4) & 0x0f) + '3',
- (state->rev2 >> 8) & 0xff,
- (state->rev1 & 0x0f) + '@',
- ((state->rev1 >> 8) & 0xff) + '@',
- state->rev2 & 0x1f);
-
- state->opmode = opmode;
- if (state->opmode == OPMODE_AUTO) {
- /* MSP revision G and up have both autodetect and autoselect */
- if ((state->rev1 & 0x0f) >= 'G'-'@')
- state->opmode = OPMODE_AUTOSELECT;
- /* MSP revision D and up have autodetect */
- else if ((state->rev1 & 0x0f) >= 'D'-'@')
- state->opmode = OPMODE_AUTODETECT;
- else
- state->opmode = OPMODE_MANUAL;
- }
-
- /* hello world :-) */
- msp_info("%s found @ 0x%x (%s)\n", client->name, address << 1, adapter->name);
- msp_info("%s ", client->name);
- if (HAVE_NICAM(state) && HAVE_RADIO(state))
- printk("supports nicam and radio, ");
- else if (HAVE_NICAM(state))
- printk("supports nicam, ");
- else if (HAVE_RADIO(state))
- printk("supports radio, ");
- printk("mode is ");
-
- /* version-specific initialization */
- switch (state->opmode) {
- case OPMODE_MANUAL:
- printk("manual");
- thread_func = msp3400c_thread;
- break;
- case OPMODE_AUTODETECT:
- printk("autodetect");
- thread_func = msp3410d_thread;
- break;
- case OPMODE_AUTOSELECT:
- printk("autodetect and autoselect");
- thread_func = msp34xxg_thread;
- break;
- }
- printk("\n");
-
- /* startup control thread if needed */
- if (thread_func) {
- state->kthread = kthread_run(thread_func, client, "msp34xx");
-
- if (state->kthread == NULL)
- msp_warn("kernel_thread() failed\n");
- msp_wake_thread(client);
- }
-
- /* done */
- i2c_attach_client(client);
-
- return 0;
-}
-
-static int msp_probe(struct i2c_adapter *adapter)
-{
- if (adapter->class & I2C_CLASS_TV_ANALOG)
- return i2c_probe(adapter, &addr_data, msp_attach);
- return 0;
-}
-
-static int msp_detach(struct i2c_client *client)
-{
- struct msp_state *state = i2c_get_clientdata(client);
- int err;
-
- /* shutdown control thread */
- if (state->kthread) {
- state->restart = 1;
- kthread_stop(state->kthread);
- }
- msp_reset(client);
-
- err = i2c_detach_client(client);
- if (err) {
- return err;
- }
-
- kfree(state);
- kfree(client);
- return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-/* i2c implementation */
-static struct i2c_driver i2c_driver = {
- .name = "msp3400",
- .id = I2C_DRIVERID_MSP3400,
- .flags = I2C_DF_NOTIFY,
- .attach_adapter = msp_probe,
- .detach_client = msp_detach,
- .command = msp_command,
- .driver = {
- .suspend = msp_suspend,
- .resume = msp_resume,
- },
- .owner = THIS_MODULE,
-};
-
-static int __init msp3400_init_module(void)
-{
- return i2c_add_driver(&i2c_driver);
-}
-
-static void __exit msp3400_cleanup_module(void)
-{
- i2c_del_driver(&i2c_driver);
-}
-
-module_init(msp3400_init_module);
-module_exit(msp3400_cleanup_module);
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/video/msp3400.h b/drivers/media/video/msp3400.h
index 2d9ff40..33d64ac 100644
--- a/drivers/media/video/msp3400.h
+++ b/drivers/media/video/msp3400.h
@@ -6,22 +6,62 @@
/* ---------------------------------------------------------------------- */
-struct msp_dfpreg {
- int reg;
- int value;
-};
+#define msp_err(fmt, arg...) \
+ printk(KERN_ERR "%s %d-%04x: " fmt, client->driver->driver.name, \
+ i2c_adapter_id(client->adapter), client->addr , ## arg)
+#define msp_warn(fmt, arg...) \
+ printk(KERN_WARNING "%s %d-%04x: " fmt, client->driver->driver.name, \
+ i2c_adapter_id(client->adapter), client->addr , ## arg)
+#define msp_info(fmt, arg...) \
+ printk(KERN_INFO "%s %d-%04x: " fmt, client->driver->driver.name, \
+ i2c_adapter_id(client->adapter), client->addr , ## arg)
+
+/* level 1 debug. */
+#define msp_dbg1(fmt, arg...) \
+ do { \
+ if (debug) \
+ printk(KERN_INFO "%s debug %d-%04x: " fmt, client->driver->driver.name, \
+ i2c_adapter_id(client->adapter), client->addr , ## arg); \
+ } while (0)
+
+/* level 2 debug. */
+#define msp_dbg2(fmt, arg...) \
+ do { \
+ if (debug >= 2) \
+ printk(KERN_INFO "%s debug %d-%04x: " fmt, client->driver->name, \
+ i2c_adapter_id(client->adapter), client->addr , ## arg); \
+ } while (0)
+
+/* level 3 debug. Use with care. */
+#define msp_dbg3(fmt, arg...) \
+ do { \
+ if (debug >= 16) \
+ printk(KERN_INFO "%s debug %d-%04x: " fmt, client->driver->name, \
+ i2c_adapter_id(client->adapter), client->addr , ## arg); \
+ } while (0)
struct msp_matrix {
int input;
int output;
};
-#define MSP_SET_DFPREG _IOW('m',15,struct msp_dfpreg)
-#define MSP_GET_DFPREG _IOW('m',16,struct msp_dfpreg)
-
/* ioctl for MSP_SET_MATRIX will have to be registered */
#define MSP_SET_MATRIX _IOW('m',17,struct msp_matrix)
+/* This macro is allowed for *constants* only, gcc must calculate it
+ at compile time. Remember -- no floats in kernel mode */
+#define MSP_CARRIER(freq) ((int)((float)(freq / 18.432) * (1 << 24)))
+
+#define MSP_MODE_AM_DETECT 0
+#define MSP_MODE_FM_RADIO 2
+#define MSP_MODE_FM_TERRA 3
+#define MSP_MODE_FM_SAT 4
+#define MSP_MODE_FM_NICAM1 5
+#define MSP_MODE_FM_NICAM2 6
+#define MSP_MODE_AM_NICAM 7
+#define MSP_MODE_BTSC 8
+#define MSP_MODE_EXTERN 9
+
#define SCART_MASK 0
#define SCART_IN1 1
#define SCART_IN2 2
@@ -36,4 +76,77 @@ struct msp_matrix {
#define SCART1_OUT 1
#define SCART2_OUT 2
+#define OPMODE_AUTO -1
+#define OPMODE_MANUAL 0
+#define OPMODE_AUTODETECT 1 /* use autodetect (>= msp3410 only) */
+#define OPMODE_AUTOSELECT 2 /* use autodetect & autoselect (>= msp34xxG) */
+
+/* module parameters */
+extern int debug;
+extern int once;
+extern int amsound;
+extern int standard;
+extern int dolby;
+extern int stereo_threshold;
+
+struct msp_state {
+ int rev1, rev2;
+
+ int opmode;
+ int mode;
+ int norm;
+ int stereo;
+ int nicam_on;
+ int acb;
+ int in_scart;
+ int i2s_mode;
+ int main, second; /* sound carrier */
+ int input;
+ int source; /* see msp34xxg_set_source */
+
+ /* v4l2 */
+ int audmode;
+ int rxsubchans;
+
+ int muted;
+ int volume, balance;
+ int bass, treble;
+
+ /* thread */
+ struct task_struct *kthread;
+ wait_queue_head_t wq;
+ int restart:1;
+ int watch_stereo:1;
+};
+
+#define VIDEO_MODE_RADIO 16 /* norm magic for radio mode */
+
+#define HAVE_NICAM(state) (((state->rev2 >> 8) & 0xff) != 0)
+#define HAVE_RADIO(state) ((state->rev1 & 0x0f) >= 'G'-'@')
+
+/* msp3400-driver.c */
+int msp_write_dem(struct i2c_client *client, int addr, int val);
+int msp_write_dsp(struct i2c_client *client, int addr, int val);
+int msp_read_dem(struct i2c_client *client, int addr);
+int msp_read_dsp(struct i2c_client *client, int addr);
+int msp_reset(struct i2c_client *client);
+void msp_set_scart(struct i2c_client *client, int in, int out);
+void msp_set_mute(struct i2c_client *client);
+void msp_set_audio(struct i2c_client *client);
+int msp_modus(struct i2c_client *client, int norm);
+int msp_standard(int norm);
+int msp_sleep(struct msp_state *state, int timeout);
+
+/* msp3400-kthreads.c */
+const char *msp_standard_mode_name(int mode);
+void msp3400c_setcarrier(struct i2c_client *client, int cdo1, int cdo2);
+void msp3400c_setmode(struct i2c_client *client, int type);
+void msp3400c_setstereo(struct i2c_client *client, int mode);
+int autodetect_stereo(struct i2c_client *client);
+int msp3400c_thread(void *data);
+int msp3410d_thread(void *data);
+int msp34xxg_thread(void *data);
+void msp34xxg_detect_stereo(struct i2c_client *client);
+void msp34xxg_set_audmode(struct i2c_client *client, int audmode);
+
#endif /* MSP3400_H */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
