The attached patch adds a module for testing and benchmarking mutexes,
semaphores and R/W semaphores.
Using it is simple:
insmod synchro-test.ko <args>
It will exit with error ENOANO after running the tests and printing the
results to the kernel console log.
The available arguments are:
(*) mx=N
Start up to N mutex thrashing threads, where N is at most 20. All will
try and thrash the same mutex.
(*) sm=N
Start up to N counting semaphore thrashing threads, where N is at most
20. All will try and thrash the same semaphore.
(*) ism=M
Initialise the counting semaphore with M, where M is any positive
integer greater than zero. The default is 4.
(*) rd=N
(*) wr=O
(*) dg=P
Start up to N reader thrashing threads, O writer thrashing threads and
P downgrader thrashing threads, where N, O and P are at most 20
apiece. All will try and thrash the same read/write semaphore.
(*) elapse=N
Run the tests for N seconds. The default is 5.
(*) load=N
Each thread delays for N uS whilst holding the lock. The dfault is 0.
(*) interval=N
Each thread delays for N uS whilst not holding the lock. The default
is 0.
(*) do_sched=1
Each thread will call schedule if required after each iteration.
(*) v=1
Print more verbose information, including a thread iteration
distribution list.
The module should be enabled by turning on CONFIG_DEBUG_SYNCHRO_TEST to "m".
Signed-Off-By: David Howells <[email protected]>
---
warthog>diffstat -p1 mutex-debug-module-2615rc7-2.diff
Documentation/synchro-test.txt | 59 ++++
kernel/Makefile | 1
kernel/synchro-test.c | 503 +++++++++++++++++++++++++++++++++++++++++
lib/Kconfig.debug | 14 +
4 files changed, 577 insertions(+)
diff -uNrp linux-2.6.15-rc7-mutex/Documentation/synchro-test.txt linux-2.6.15-rc7-mutex-slowopt/Documentation/synchro-test.txt
--- linux-2.6.15-rc7-mutex/Documentation/synchro-test.txt 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.15-rc7-mutex-slowopt/Documentation/synchro-test.txt 2006-01-03 16:13:30.000000000 +0000
@@ -0,0 +1,59 @@
+The synchro-test.ko module can be used for testing and benchmarking mutexes,
+semaphores and R/W semaphores.
+
+The module is compiled by setting CONFIG_DEBUG_SYNCHRO_TEST to "m" when
+configuring the kernel.
+
+Using it is simple:
+
+ insmod synchro-test.ko <args>
+
+It will exit with error ENOANO after running the tests and printing the
+results to the kernel console log.
+
+The available arguments are:
+
+ (*) mx=N
+
+ Start up to N mutex thrashing threads, where N is at most 20. All will
+ try and thrash the same mutex.
+
+ (*) sm=N
+
+ Start up to N counting semaphore thrashing threads, where N is at most
+ 20. All will try and thrash the same semaphore.
+
+ (*) ism=M
+
+ Initialise the counting semaphore with M, where M is any positive
+ integer greater than zero. The default is 4.
+
+ (*) rd=N
+ (*) wr=O
+ (*) dg=P
+
+ Start up to N reader thrashing threads, O writer thrashing threads and
+ P downgrader thrashing threads, where N, O and P are at most 20
+ apiece. All will try and thrash the same read/write semaphore.
+
+ (*) elapse=N
+
+ Run the tests for N seconds. The default is 5.
+
+ (*) load=N
+
+ Each thread delays for N uS whilst holding the lock. The default is 0.
+
+ (*) interval=N
+
+ Each thread delays for N uS whilst not holding the lock. The default
+ is 0.
+
+ (*) do_sched=1
+
+ Each thread will call schedule if required after each iteration.
+
+ (*) v=1
+
+ Print more verbose information, including a thread iteration
+ distribution list.
diff -uNrp linux-2.6.15-rc7-mutex/kernel/Makefile linux-2.6.15-rc7-mutex-slowopt/kernel/Makefile
--- linux-2.6.15-rc7-mutex/kernel/Makefile 2006-01-03 14:40:06.000000000 +0000
+++ linux-2.6.15-rc7-mutex-slowopt/kernel/Makefile 2006-01-03 15:43:51.000000000 +0000
@@ -33,6 +33,7 @@ obj-$(CONFIG_GENERIC_HARDIRQS) += irq/
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_SECCOMP) += seccomp.o
obj-$(CONFIG_RCU_TORTURE_TEST) += rcutorture.o
+obj-$(CONFIG_DEBUG_SYNCHRO_TEST) += synchro-test.o
ifneq ($(CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER),y)
# According to Alan Modra <[email protected]>, the -fno-omit-frame-pointer is
diff -uNrp linux-2.6.15-rc7-mutex/kernel/synchro-test.c linux-2.6.15-rc7-mutex-slowopt/kernel/synchro-test.c
--- linux-2.6.15-rc7-mutex/kernel/synchro-test.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.15-rc7-mutex-slowopt/kernel/synchro-test.c 2006-01-03 16:12:46.000000000 +0000
@@ -0,0 +1,503 @@
+/* synchro-test.c: run some threads to test the synchronisation primitives
+ *
+ * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells ([email protected])
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * The module should be run as something like:
+ *
+ * insmod synchro-test.ko rd=2 wr=2
+ * insmod synchro-test.ko mx=1
+ * insmod synchro-test.ko sm=2 ism=1
+ * insmod synchro-test.ko sm=2 ism=2
+ *
+ * See Documentation/synchro-test.txt for more information.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/poll.h>
+#include <linux/moduleparam.h>
+#include <linux/stat.h>
+#include <linux/init.h>
+#include <asm/atomic.h>
+#include <linux/personality.h>
+#include <linux/smp_lock.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/completion.h>
+#include <linux/mutex.h>
+
+#define VALIDATE_OPERATORS 0
+
+static int nummx = 0;
+static int numsm = 0, seminit = 4;
+static int numrd = 0, numwr = 0, numdg = 0;
+static int elapse = 5, load = 0, do_sched = 0, interval = 0;
+static int verbose = 0;
+
+MODULE_AUTHOR("David Howells");
+MODULE_DESCRIPTION("Synchronisation primitive test demo");
+MODULE_LICENSE("GPL");
+
+module_param_named(v, verbose, int, 0);
+MODULE_PARM_DESC(verbose, "Verbosity");
+
+module_param_named(mx, nummx, int, 0);
+MODULE_PARM_DESC(nummx, "Number of mutex threads");
+
+module_param_named(sm, numsm, int, 0);
+MODULE_PARM_DESC(numsm, "Number of semaphore threads");
+
+module_param_named(ism, seminit, int, 0);
+MODULE_PARM_DESC(seminit, "Initial semaphore value");
+
+module_param_named(rd, numrd, int, 0);
+MODULE_PARM_DESC(numrd, "Number of reader threads");
+
+module_param_named(wr, numwr, int, 0);
+MODULE_PARM_DESC(numwr, "Number of writer threads");
+
+module_param_named(dg, numdg, int, 0);
+MODULE_PARM_DESC(numdg, "Number of downgrader threads");
+
+module_param(elapse, int, 0);
+MODULE_PARM_DESC(elapse, "Number of seconds to run for");
+
+module_param(load, int, 0);
+MODULE_PARM_DESC(load, "Length of load in uS");
+
+module_param(interval, int, 0);
+MODULE_PARM_DESC(interval, "Length of interval in uS before re-getting lock");
+
+module_param(do_sched, int, 0);
+MODULE_PARM_DESC(do_sched, "True if each thread should schedule regularly");
+
+/* the semaphores under test */
+static struct mutex ____cacheline_aligned mutex;
+static struct semaphore ____cacheline_aligned sem;
+static struct rw_semaphore ____cacheline_aligned rwsem;
+
+static atomic_t ____cacheline_aligned do_stuff = ATOMIC_INIT(0);
+
+#if VALIDATE_OPERATORS
+static atomic_t ____cacheline_aligned mutexes = ATOMIC_INIT(0);
+static atomic_t ____cacheline_aligned semaphores = ATOMIC_INIT(0);
+static atomic_t ____cacheline_aligned readers = ATOMIC_INIT(0);
+static atomic_t ____cacheline_aligned writers = ATOMIC_INIT(0);
+#endif
+
+static unsigned int ____cacheline_aligned mutexes_taken[20];
+static unsigned int ____cacheline_aligned semaphores_taken[20];
+static unsigned int ____cacheline_aligned reads_taken[20];
+static unsigned int ____cacheline_aligned writes_taken[20];
+static unsigned int ____cacheline_aligned downgrades_taken[20];
+
+static struct completion ____cacheline_aligned mx_comp[20];
+static struct completion ____cacheline_aligned sm_comp[20];
+static struct completion ____cacheline_aligned rd_comp[20];
+static struct completion ____cacheline_aligned wr_comp[20];
+static struct completion ____cacheline_aligned dg_comp[20];
+
+static struct timer_list ____cacheline_aligned timer;
+
+#define ACCOUNT(var, N) var##_taken[N]++;
+
+#if VALIDATE_OPERATORS
+#define TRACK(var, dir) atomic_##dir(&(var))
+
+#define CHECK(var, cond, val) \
+do { \
+ int x = atomic_read(&(var)); \
+ if (unlikely(!(x cond (val)))) \
+ printk("check [%s %s %d, == %d] failed in %s\n", \
+ #var, #cond, (val), x, __func__); \
+} while (0)
+
+#else
+#define TRACK(var, dir) do {} while(0)
+#define CHECK(var, cond, val) do {} while(0)
+#endif
+
+static inline void do_mutex_lock(unsigned int N)
+{
+ mutex_lock(&mutex);
+
+ ACCOUNT(mutexes, N);
+ TRACK(mutexes, inc);
+ CHECK(mutexes, ==, 1);
+}
+
+static inline void do_mutex_unlock(unsigned int N)
+{
+ CHECK(mutexes, ==, 1);
+ TRACK(mutexes, dec);
+
+ mutex_unlock(&mutex);
+}
+
+static inline void do_down(unsigned int N)
+{
+ CHECK(mutexes, <, seminit);
+
+ down(&sem);
+
+ ACCOUNT(semaphores, N);
+ TRACK(semaphores, inc);
+}
+
+static inline void do_up(unsigned int N)
+{
+ CHECK(semaphores, >, 0);
+ TRACK(semaphores, dec);
+
+ up(&sem);
+}
+
+static inline void do_down_read(unsigned int N)
+{
+ down_read(&rwsem);
+
+ ACCOUNT(reads, N);
+ TRACK(readers, inc);
+ CHECK(readers, >, 0);
+ CHECK(writers, ==, 0);
+}
+
+static inline void do_up_read(unsigned int N)
+{
+ CHECK(readers, >, 0);
+ CHECK(writers, ==, 0);
+ TRACK(readers, dec);
+
+ up_read(&rwsem);
+}
+
+static inline void do_down_write(unsigned int N)
+{
+ down_write(&rwsem);
+
+ ACCOUNT(writes, N);
+ TRACK(writers, inc);
+ CHECK(writers, ==, 1);
+ CHECK(readers, ==, 0);
+}
+
+static inline void do_up_write(unsigned int N)
+{
+ CHECK(writers, ==, 1);
+ CHECK(readers, ==, 0);
+ TRACK(writers, dec);
+
+ up_write(&rwsem);
+}
+
+static inline void do_downgrade_write(unsigned int N)
+{
+ CHECK(writers, ==, 1);
+ CHECK(readers, ==, 0);
+ TRACK(writers, dec);
+ TRACK(readers, inc);
+
+ downgrade_write(&rwsem);
+
+ ACCOUNT(downgrades, N);
+}
+
+static inline void sched(void)
+{
+ if (do_sched)
+ schedule();
+}
+
+int mutexer(void *arg)
+{
+ unsigned int N = (unsigned long) arg;
+
+ daemonize("Mutex%u", N);
+
+ while (atomic_read(&do_stuff)) {
+ do_mutex_lock(N);
+ if (load)
+ udelay(load);
+ do_mutex_unlock(N);
+ sched();
+ if (interval)
+ udelay(interval);
+ }
+
+ if (verbose >= 2)
+ printk("%s: done\n", current->comm);
+ complete_and_exit(&mx_comp[N], 0);
+}
+
+int semaphorer(void *arg)
+{
+ unsigned int N = (unsigned long) arg;
+
+ daemonize("Sem%u", N);
+
+ while (atomic_read(&do_stuff)) {
+ do_down(N);
+ if (load)
+ udelay(load);
+ do_up(N);
+ sched();
+ if (interval)
+ udelay(interval);
+ }
+
+ if (verbose >= 2)
+ printk("%s: done\n", current->comm);
+ complete_and_exit(&sm_comp[N], 0);
+}
+
+int reader(void *arg)
+{
+ unsigned int N = (unsigned long) arg;
+
+ daemonize("Read%u", N);
+
+ while (atomic_read(&do_stuff)) {
+ do_down_read(N);
+#ifdef LOAD_TEST
+ if (load)
+ udelay(load);
+#endif
+ do_up_read(N);
+ sched();
+ if (interval)
+ udelay(interval);
+ }
+
+ if (verbose >= 2)
+ printk("%s: done\n", current->comm);
+ complete_and_exit(&rd_comp[N], 0);
+}
+
+int writer(void *arg)
+{
+ unsigned int N = (unsigned long) arg;
+
+ daemonize("Write%u", N);
+
+ while (atomic_read(&do_stuff)) {
+ do_down_write(N);
+#ifdef LOAD_TEST
+ if (load)
+ udelay(load);
+#endif
+ do_up_write(N);
+ sched();
+ if (interval)
+ udelay(interval);
+ }
+
+ if (verbose >= 2)
+ printk("%s: done\n", current->comm);
+ complete_and_exit(&wr_comp[N], 0);
+}
+
+int downgrader(void *arg)
+{
+ unsigned int N = (unsigned long) arg;
+
+ daemonize("Down%u", N);
+
+ while (atomic_read(&do_stuff)) {
+ do_down_write(N);
+#ifdef LOAD_TEST
+ if (load)
+ udelay(load);
+#endif
+ do_downgrade_write(N);
+#ifdef LOAD_TEST
+ if (load)
+ udelay(load);
+#endif
+ do_up_read(N);
+ sched();
+ if (interval)
+ udelay(interval);
+ }
+
+ if (verbose >= 2)
+ printk("%s: done\n", current->comm);
+ complete_and_exit(&dg_comp[N], 0);
+}
+
+static void stop_test(unsigned long dummy)
+{
+ atomic_set(&do_stuff, 0);
+}
+
+static unsigned int total(const char *what, unsigned int counts[], int num)
+{
+ unsigned int tot = 0, max = 0, min = UINT_MAX, zeros = 0, cnt;
+ int loop;
+
+ for (loop = 0; loop < num; loop++) {
+ cnt = counts[loop];
+
+ if (cnt == 0) {
+ zeros++;
+ min = 0;
+ continue;
+ }
+
+ tot += cnt;
+ if (tot > max)
+ max = tot;
+ if (tot < min)
+ min = tot;
+ }
+
+ if (verbose && tot > 0) {
+ printk("%s:", what);
+
+ for (loop = 0; loop < num; loop++) {
+ cnt = counts[loop];
+
+ if (cnt == 0)
+ printk(" zzz");
+ else
+ printk(" %d%%", cnt * 100 / tot);
+ }
+
+ printk("\n");
+ }
+
+ return tot;
+}
+
+/*****************************************************************************/
+/*
+ *
+ */
+static int __init do_tests(void)
+{
+ unsigned long loop;
+ unsigned int mutex_total, sem_total, rd_total, wr_total, dg_total;
+
+ if (nummx < 0 || nummx > 20 ||
+ numsm < 0 || numsm > 20 ||
+ numrd < 0 || numrd > 20 ||
+ numwr < 0 || numwr > 20 ||
+ numdg < 0 || numdg > 20 ||
+ seminit < 1 ||
+ elapse < 1 ||
+ load < 0 || load > 999 ||
+ interval < 0 || interval > 999
+ ) {
+ printk("Parameter out of range\n");
+ return -ERANGE;
+ }
+
+ if ((nummx | numsm | numrd | numwr | numdg) == 0) {
+ printk("Nothing to do\n");
+ return -EINVAL;
+ }
+
+ if (verbose)
+ printk("\nStarting synchronisation primitive tests...\n");
+
+ mutex_init(&mutex);
+ sema_init(&sem, seminit);
+ init_rwsem(&rwsem);
+ atomic_set(&do_stuff, 1);
+
+ /* kick off all the children */
+ for (loop = 0; loop < 20; loop++) {
+ if (loop < nummx) {
+ init_completion(&mx_comp[loop]);
+ kernel_thread(mutexer, (void *) loop, 0);
+ }
+
+ if (loop < numsm) {
+ init_completion(&sm_comp[loop]);
+ kernel_thread(semaphorer, (void *) loop, 0);
+ }
+
+ if (loop < numrd) {
+ init_completion(&rd_comp[loop]);
+ kernel_thread(reader, (void *) loop, 0);
+ }
+
+ if (loop < numwr) {
+ init_completion(&wr_comp[loop]);
+ kernel_thread(writer, (void *) loop, 0);
+ }
+
+ if (loop < numdg) {
+ init_completion(&dg_comp[loop]);
+ kernel_thread(downgrader, (void *) loop, 0);
+ }
+ }
+
+ /* set a stop timer */
+ init_timer(&timer);
+ timer.function = stop_test;
+ timer.expires = jiffies + elapse * HZ;
+ add_timer(&timer);
+
+ /* now wait until it's all done */
+ for (loop = 0; loop < nummx; loop++)
+ wait_for_completion(&mx_comp[loop]);
+
+ for (loop = 0; loop < numsm; loop++)
+ wait_for_completion(&sm_comp[loop]);
+
+ for (loop = 0; loop < numrd; loop++)
+ wait_for_completion(&rd_comp[loop]);
+
+ for (loop = 0; loop < numwr; loop++)
+ wait_for_completion(&wr_comp[loop]);
+
+ for (loop = 0; loop < numdg; loop++)
+ wait_for_completion(&dg_comp[loop]);
+
+ atomic_set(&do_stuff, 0);
+ del_timer(&timer);
+
+ if (mutex_is_locked(&mutex))
+ printk(KERN_ERR "Mutex is still locked!\n");
+
+ /* count up */
+ mutex_total = total("MTX", mutexes_taken, nummx);
+ sem_total = total("SEM", semaphores_taken, numsm);
+ rd_total = total("RD ", reads_taken, numrd);
+ wr_total = total("WR ", writes_taken, numwr);
+ dg_total = total("DG ", downgrades_taken, numdg);
+
+ /* print the results */
+ if (verbose) {
+ printk("mutexes taken: %u\n", mutex_total);
+ printk("semaphores taken: %u\n", sem_total);
+ printk("reads taken: %u\n", rd_total);
+ printk("writes taken: %u\n", wr_total);
+ printk("downgrades taken: %u\n", dg_total);
+ }
+ else {
+ printk("%3d %3d %3d %3d %3d %c %3d %9u %9u %9u %9u %9u\n",
+ nummx, numsm, numrd, numwr, numdg,
+ do_sched ? 's' : '-',
+ load,
+ mutex_total,
+ sem_total,
+ rd_total,
+ wr_total,
+ dg_total);
+ }
+
+ /* tell insmod to discard the module */
+ if (verbose)
+ printk("Tests complete\n");
+ return -ENOANO;
+
+} /* end do_tests() */
+
+module_init(do_tests);
diff -uNrp linux-2.6.15-rc7-mutex/lib/Kconfig.debug linux-2.6.15-rc7-mutex-slowopt/lib/Kconfig.debug
--- linux-2.6.15-rc7-mutex/lib/Kconfig.debug 2006-01-03 14:40:06.000000000 +0000
+++ linux-2.6.15-rc7-mutex-slowopt/lib/Kconfig.debug 2006-01-03 15:48:23.000000000 +0000
@@ -207,3 +207,17 @@ config RCU_TORTURE_TEST
at boot time (you probably don't).
Say M if you want the RCU torture tests to build as a module.
Say N if you are unsure.
+
+config DEBUG_SYNCHRO_TEST
+ tristate "Synchronisation primitive testing module"
+ depends on DEBUG_KERNEL
+ default n
+ help
+ This option provides a kernel module that can thrash the sleepable
+ synchronisation primitives (mutexes and semaphores).
+
+ You should say N or M here. Whilst the module can be built in, it's
+ not recommended as it requires module parameters supplying to get it
+ to do anything.
+
+ See Documentation/synchro-test.txt.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
