Re: libata support for JMicron JMB360 ?

[Prakash Punnoor <prakash@punnoor.de>]

Am Freitag Dezember 30 2005 15:41 schrieb Prakash Punnoor:
> Hi,
>
> I read in an old thread that this question was asked once and you replied
> you never heard of this chip. Maybe now the situation has changed? If not,
> please take a look here:
>
> http://www.jmicron.com/product/jmb360.htm
>
> It claims the chip is ahci compatible, but the libata ahci driver can't
> detect it (tried 2.6.14.2 and 2.6.15-rc7).
>
> Maybe just adding some ids or such is enough for supporting it?
> Following lspci -vvv -xxx regrading the Jmicron stuff:

[...]

Well, I tried adding the ids into ahci.c, but this wasn't enough:

--- linux-2.6.15-rc7/drivers/scsi/ahci.c.old	2005-12-31 10:36:35.000000000 
+0100
+++ linux-2.6.15-rc7/drivers/scsi/ahci.c	2005-12-31 10:36:45.000000000 +0100
@@ -277,6 +277,8 @@
 	  board_ahci }, /* ESB2 */
 	{ PCI_VENDOR_ID_INTEL, 0x27c6, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 	  board_ahci }, /* ICH7-M DH */
+	{ 0x197b, 0x2360, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+	  board_ahci }, /* JMicron JMB360 */
 	{ }	/* terminate list */
 };
 
dmesg gives:
libata version 1.20 loaded.
ahci 0000:03:00.0: version 1.2
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 35 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:03:00.0 to 64
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
ata1: SATA max UDMA/133 cmd 0xF8804100 ctl 0x0 bmdma 0x0 irq 50
ata1 is slow to respond, please be patient
ata1 failed to respond (30 secs)
scsi0 : ahci

Any ideas?
-- 
(°=                 =°)
//\ Prakash Punnoor /\\
V_/                 \_V

Attachment: pgpAaKFixUYab.pgp
Description: PGP signature