mutex implementation, core files: just the basic subsystem, no users of it.
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Arjan van de Ven <[email protected]>
----
include/linux/mutex.h | 111 ++++++++++++
kernel/Makefile | 2
kernel/mutex.c | 434 ++++++++++++++++++++++++++++++++++++++++++++++++++
kernel/mutex.h | 35 ++++
4 files changed, 581 insertions(+), 1 deletion(-)
Index: linux/include/linux/mutex.h
===================================================================
--- /dev/null
+++ linux/include/linux/mutex.h
@@ -0,0 +1,111 @@
+/*
+ * Mutexes: blocking mutual exclusion locks
+ *
+ * started by Ingo Molnar:
+ *
+ * Copyright (C) 2004, 2005 Red Hat, Inc., Ingo Molnar <[email protected]>
+ *
+ * This file contains the main data structure and API definitions.
+ */
+#ifndef __LINUX_MUTEX_H
+#define __LINUX_MUTEX_H
+
+#include <linux/list.h>
+#include <linux/spinlock_types.h>
+
+#include <asm/atomic.h>
+
+/*
+ * Simple, straightforward mutexes with strict semantics:
+ *
+ * - only one task can hold the mutex at a time
+ * - only the owner can unlock the mutex
+ * - multiple unlocks are not permitted
+ * - recursive locking is not permitted
+ * - a mutex object must be initialized via the API
+ * - a mutex object must not be initialized via memset or copying
+ * - task may not exit with mutex held
+ * - memory areas where held locks reside must not be freed
+ * - held mutexes must not be reinitialized
+ * - mutexes may not be used in irq contexts
+ *
+ * These semantics are fully enforced when DEBUG_MUTEXES is
+ * enabled. Furthermore, besides enforcing the above rules, the mutex
+ * debugging code also implements a number of additional features
+ * that make lock debugging easier and faster:
+ *
+ * - uses symbolic names of mutexes, whenever they are printed in debug output
+ * - point-of-acquire tracking, symbolic lookup of function names
+ * - list of all locks held in the system, printout of them
+ * - owner tracking
+ * - detects self-recursing locks and prints out all relevant info
+ * - detects multi-task circular deadlocks and prints out all affected
+ * locks and tasks (and only those tasks)
+ */
+struct mutex {
+ /* 1: unlocked, 0: locked, negative: locked, possible waiters */
+ atomic_t count;
+ spinlock_t wait_lock;
+ struct list_head wait_list;
+#ifdef CONFIG_DEBUG_MUTEXES
+ struct thread_info *owner;
+ struct list_head held_list;
+ unsigned long acquire_ip;
+ const char *name;
+ void *magic;
+#endif
+};
+
+/*
+ * This is the control structure for tasks blocked on mutex,
+ * which resides on the blocked task's kernel stack:
+ */
+struct mutex_waiter {
+ struct list_head list;
+ struct thread_info *ti;
+#ifdef CONFIG_DEBUG_MUTEXES
+ struct mutex *lock;
+ void *magic;
+#endif
+};
+
+#ifdef CONFIG_DEBUG_MUTEXES
+# include <linux/mutex-debug.h>
+#else
+# define __DEBUG_MUTEX_INITIALIZER(lockname)
+# define mutex_init(mutex) __mutex_init(mutex, NULL)
+# define mutex_destroy(mutex) do { } while (0)
+# define mutex_debug_show_all_locks() do { } while (0)
+# define mutex_debug_show_held_locks(p) do { } while (0)
+# define mutex_debug_check_no_locks_held(task) do { } while (0)
+# define mutex_debug_check_no_locks_freed(from, to) do { } while (0)
+#endif
+
+#define __MUTEX_INITIALIZER(lockname) \
+ { .count = ATOMIC_INIT(1) \
+ , .wait_lock = SPIN_LOCK_UNLOCKED \
+ , .wait_list = LIST_HEAD_INIT(lockname.wait_list) \
+ __DEBUG_MUTEX_INITIALIZER(lockname) }
+
+#define DEFINE_MUTEX(mutexname) \
+ struct mutex mutexname = __MUTEX_INITIALIZER(mutexname)
+
+extern void FASTCALL(__mutex_init(struct mutex *lock, const char *name));
+
+/***
+ * mutex_is_locked - is the mutex locked
+ * @lock: the mutex to be queried
+ *
+ * Returns 1 if the mutex is locked, 0 if unlocked.
+ */
+static inline int fastcall mutex_is_locked(struct mutex *lock)
+{
+ return atomic_read(&lock->count) != 1;
+}
+
+extern void FASTCALL(mutex_lock(struct mutex *lock));
+extern int FASTCALL(mutex_lock_interruptible(struct mutex *lock));
+extern int FASTCALL(mutex_trylock(struct mutex *lock));
+extern void FASTCALL(mutex_unlock(struct mutex *lock));
+
+#endif
Index: linux/kernel/Makefile
===================================================================
--- linux.orig/kernel/Makefile
+++ linux/kernel/Makefile
@@ -7,7 +7,7 @@ obj-y = sched.o fork.o exec_domain.o
sysctl.o capability.o ptrace.o timer.o user.o \
signal.o sys.o kmod.o workqueue.o pid.o \
rcupdate.o intermodule.o extable.o params.o posix-timers.o \
- kthread.o wait.o kfifo.o sys_ni.o posix-cpu-timers.o
+ kthread.o wait.o kfifo.o sys_ni.o posix-cpu-timers.o mutex.o
obj-$(CONFIG_FUTEX) += futex.o
obj-$(CONFIG_GENERIC_ISA_DMA) += dma.o
Index: linux/kernel/mutex.c
===================================================================
--- /dev/null
+++ linux/kernel/mutex.c
@@ -0,0 +1,434 @@
+/*
+ * kernel/mutex.c
+ *
+ * Mutexes: blocking mutual exclusion locks
+ *
+ * Started by Ingo Molnar:
+ *
+ * Copyright (C) 2004, 2005 Red Hat, Inc., Ingo Molnar <[email protected]>
+ *
+ * Many thanks to Arjan van de Ven, Thomas Gleixner, Steven Rostedt and
+ * David Howells for suggestions and improvements.
+ */
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+
+/*
+ * In the DEBUG case we are using the "NULL fastpath" for mutexes,
+ * which forces all calls into the slowpath:
+ */
+#ifdef CONFIG_DEBUG_MUTEXES
+# include "mutex-debug.h"
+# include <asm-generic/mutex-null.h>
+#else
+# include "mutex.h"
+# include <asm/mutex.h>
+#endif
+
+/*
+ * Block on a lock - add ourselves to the list of waiters.
+ * Called with lock->wait_lock held.
+ */
+static inline void
+add_waiter(struct mutex *lock, struct mutex_waiter *waiter,
+ struct thread_info *ti, int add_to_head __IP_DECL__)
+{
+ debug_mutex_add_waiter(lock, waiter, ti, ip);
+
+ waiter->ti = ti;
+
+ /*
+ * Add waiting tasks to the end of the waitqueue (FIFO),
+ * but add repeat waiters to the head (LIFO):
+ */
+ if (add_to_head)
+ list_add(&waiter->list, &lock->wait_list);
+ else
+ list_add_tail(&waiter->list, &lock->wait_list);
+}
+
+/*
+ * Wake up a task and make it the new owner of the mutex:
+ */
+static inline void
+mutex_wakeup_waiter(struct mutex *lock __IP_DECL__)
+{
+ struct mutex_waiter *waiter;
+
+ /* get the first entry from the wait-list: */
+ waiter = list_entry(lock->wait_list.next, struct mutex_waiter, list);
+
+ debug_mutex_wake_waiter(lock, waiter);
+
+ wake_up_process(waiter->ti->task);
+}
+
+/*
+ * Lock a mutex, common slowpath. We just decremented the count,
+ * and it got negative as a result.
+ *
+ * We enter with the lock held, and return with it released.
+ */
+static inline int
+__mutex_lock_common(struct mutex *lock, struct mutex_waiter *waiter,
+ struct thread_info *ti, unsigned long task_state,
+ const int add_to_head __IP_DECL__)
+{
+ struct task_struct *task = ti->task;
+ unsigned int old_val;
+
+ /*
+ * Lets try to take the lock again - this is needed even if
+ * we get here for the first time (shortly after failing to
+ * acquire the lock), to make sure that we get a wakeup once
+ * it's unlocked. Later on this is the operation that gives
+ * us the lock. So we xchg it to -1, so that when we release
+ * the lock, we properly wake up the other waiters:
+ */
+ old_val = atomic_xchg(&lock->count, -1);
+
+ if (unlikely(old_val == 1)) {
+ /*
+ * Got the lock - rejoice! But there's one small
+ * detail to fix up: above we have set the lock to -1,
+ * unconditionally. But what if there are no waiters?
+ * While it would work with -1 too, 0 is a better value
+ * in that case, because we wont hit the slowpath when
+ * we release the lock. We can simply use atomic_set()
+ * for this, because we are the owners of the lock now,
+ * and are still holding the wait_lock:
+ */
+ if (likely(list_empty(&lock->wait_list)))
+ atomic_set(&lock->count, 0);
+ debug_mutex_set_owner(lock, ti __IP__);
+
+ spin_unlock_mutex(&lock->wait_lock);
+
+ debug_mutex_free_waiter(waiter);
+
+ DEBUG_WARN_ON(list_empty(&lock->held_list));
+ DEBUG_WARN_ON(lock->owner != ti);
+
+ return 1;
+ }
+
+ add_waiter(lock, waiter, ti, add_to_head __IP__);
+ __set_task_state(task, task_state);
+
+ /*
+ * Ok, didnt get the lock - we'll go to sleep after return:
+ */
+ spin_unlock_mutex(&lock->wait_lock);
+
+ return 0;
+}
+
+/*
+ * Lock the mutex, slowpath:
+ */
+static inline void __mutex_lock_nonatomic(struct mutex *lock __IP_DECL__)
+{
+ struct thread_info *ti = current_thread_info();
+ struct mutex_waiter waiter;
+ /* first time queue the waiter as FIFO: */
+ int add_to_head = 0;
+
+ debug_mutex_init_waiter(&waiter);
+
+ spin_lock_mutex(&lock->wait_lock);
+
+ /* releases the internal lock: */
+ while (!__mutex_lock_common(lock, &waiter, ti,
+ TASK_UNINTERRUPTIBLE, add_to_head __IP__)) {
+
+ /* start queueing the waiter as LIFO: */
+ add_to_head = 1;
+ /* wait to be woken up: */
+ schedule();
+
+ spin_lock_mutex(&lock->wait_lock);
+ mutex_remove_waiter(lock, &waiter, ti);
+ }
+}
+
+/*
+ * Lock a mutex interruptible, slowpath:
+ */
+static int __sched
+__mutex_lock_interruptible_nonatomic(struct mutex *lock __IP_DECL__)
+{
+ struct thread_info *ti = current_thread_info();
+ struct mutex_waiter waiter;
+ int add_to_head = 0;
+
+ debug_mutex_init_waiter(&waiter);
+
+ spin_lock_mutex(&lock->wait_lock);
+
+ for (;;) {
+ /* releases the internal lock: */
+ if (__mutex_lock_common(lock, &waiter, ti,
+ TASK_INTERRUPTIBLE, add_to_head __IP__))
+ return 0;
+
+ /* break out on a signal: */
+ if (unlikely(signal_pending(ti->task)))
+ break;
+
+ add_to_head = 1;
+ /* wait to be woken up: */
+ schedule();
+
+ spin_lock_mutex(&lock->wait_lock);
+ mutex_remove_waiter(lock, &waiter, ti);
+ }
+ /*
+ * We got a signal. Remove ourselves from the wait list:
+ */
+ spin_lock_mutex(&lock->wait_lock);
+ mutex_remove_waiter(lock, &waiter, ti);
+ /*
+ * If there are other waiters then wake
+ * one up:
+ */
+ if (unlikely(!list_empty(&lock->wait_list)))
+ mutex_wakeup_waiter(lock __IP__);
+
+ spin_unlock_mutex(&lock->wait_lock);
+
+ __set_task_state(ti->task, TASK_RUNNING);
+
+ debug_mutex_free_waiter(&waiter);
+
+ return -EINTR;
+}
+
+/*
+ * Spinlock based trylock, we take the spinlock and check whether we
+ * can get the lock:
+ */
+static inline int __mutex_trylock_nonatomic(atomic_t *lock_count)
+{
+ struct mutex *lock = container_of(lock_count, struct mutex, count);
+ int prev;
+
+ spin_lock_mutex(&lock->wait_lock);
+
+ prev = atomic_xchg(&lock->count, -1);
+ if (likely(prev == 1))
+ debug_mutex_set_owner(lock, current_thread_info() __RET_IP__);
+ /* Set it back to 0 if there are no waiters: */
+ if (likely(list_empty(&lock->wait_list)))
+ atomic_set(&lock->count, 0);
+
+ spin_unlock_mutex(&lock->wait_lock);
+
+ return prev == 1;
+}
+
+/***
+ * mutex_trylock - try acquire the mutex, without waiting
+ * @lock: the mutex to be acquired
+ *
+ * Try to acquire the mutex atomically. Returns 1 if the mutex
+ * has been acquired successfully, and 0 on contention.
+ *
+ * NOTE: this function follows the spin_trylock() convention, so
+ * it is negated to the down_trylock() return values! Be careful
+ * about this when converting semaphore users to mutexes.
+ *
+ * This function must not be used in interrupt context. The
+ * mutex must be released by the same task that acquired it.
+ */
+int fastcall mutex_trylock(struct mutex *lock)
+{
+ return __mutex_fastpath_trylock(&lock->count,
+ __mutex_trylock_nonatomic);
+}
+
+/*
+ * Release the lock, slowpath:
+ */
+static inline void __mutex_unlock_nonatomic(struct mutex *lock __IP_DECL__)
+{
+ DEBUG_WARN_ON(lock->owner != current_thread_info());
+
+ spin_lock_mutex(&lock->wait_lock);
+
+ /*
+ * some architectures leave the lock unlocked in the fastpath failure
+ * case, others need to leave it locked. In the later case we have to
+ * unlock it here
+ */
+ if (__mutex_slowpath_needs_to_unlock())
+ atomic_set(&lock->count, 1);
+
+ debug_mutex_unlock(lock);
+
+ if (!list_empty(&lock->wait_list))
+ mutex_wakeup_waiter(lock __IP__);
+
+ debug_mutex_clear_owner(lock);
+
+ spin_unlock_mutex(&lock->wait_lock);
+}
+
+/*
+ * We split it into a fastpath and a separate slowpath function,
+ * to reduce the register pressure on the fastpath:
+ *
+ * We want the atomic ops to come first in the kernel image, to make
+ * sure the branch is predicted by the CPU as default-untaken:
+ */
+static __sched void FASTCALL(__mutex_lock_noinline(atomic_t *lock_count
+ __IP_DECL__));
+
+/*
+ * The locking fastpath is the 1->0 transition from 'unlocked' into
+ * 'locked' state:
+ */
+static inline void __mutex_lock_atomic(struct mutex *lock __IP_DECL__)
+{
+ __mutex_fastpath_lock(&lock->count, __mutex_lock_noinline);
+}
+
+static void fastcall __sched
+__mutex_lock_noinline(atomic_t *lock_count __IP_DECL__)
+{
+ struct mutex *lock = container_of(lock_count, struct mutex, count);
+
+ __mutex_lock_nonatomic(lock __IP__);
+}
+
+static inline void __mutex_lock(struct mutex *lock __IP_DECL__)
+{
+ __mutex_lock_atomic(lock __IP__);
+}
+
+static int fastcall __sched
+__mutex_lock_interruptible_noinline(atomic_t *lock_count __IP_DECL__);
+
+static inline int __mutex_lock_interruptible(struct mutex *lock __IP_DECL__)
+{
+ return __mutex_fastpath_lock_retval
+ (&lock->count, __mutex_lock_interruptible_noinline);
+}
+
+static int fastcall __sched
+__mutex_lock_interruptible_noinline(atomic_t *lock_count __IP_DECL__)
+{
+ struct mutex *lock = container_of(lock_count, struct mutex, count);
+
+ return __mutex_lock_interruptible_nonatomic(lock __IP__);
+}
+
+static void __sched FASTCALL(__mutex_unlock_noinline(atomic_t *lock_count
+ __IP_DECL__));
+
+/*
+ * The unlocking fastpath is the 0->1 transition from 'locked' into
+ * 'unlocked' state:
+ */
+static inline void __mutex_unlock_atomic(struct mutex *lock __IP_DECL__)
+{
+ __mutex_fastpath_unlock(&lock->count, __mutex_unlock_noinline);
+}
+
+static void fastcall __sched __mutex_unlock_noinline(atomic_t *lock_count
+ __IP_DECL__)
+{
+ struct mutex *lock = container_of(lock_count, struct mutex, count);
+
+ __mutex_unlock_nonatomic(lock __IP__);
+}
+
+static inline void __mutex_unlock(struct mutex *lock __IP_DECL__)
+{
+ __mutex_unlock_atomic(lock __IP__);
+}
+
+/***
+ * mutex_lock - acquire the mutex
+ * @lock: the mutex to be acquired
+ *
+ * Lock the mutex exclusively for this task. If the mutex is not
+ * available right now, it will sleep until it can get it.
+ *
+ * The mutex must later on be released by the same task that
+ * acquired it. Recursive locking is not allowed. The task
+ * may not exit without first unlocking the mutex. Also, kernel
+ * memory where the mutex resides mutex must not be freed with
+ * the mutex still locked. The mutex must first be initialized
+ * (or statically defined) before it can be locked. memset()-ing
+ * the mutex to 0 is not allowed.
+ *
+ * ( The CONFIG_DEBUG_MUTEXES .config option turns on debugging
+ * checks that will enforce the restrictions and will also do
+ * deadlock debugging. )
+ *
+ * This function is similar to (but not equivalent to) down().
+ */
+void fastcall __sched mutex_lock(struct mutex *lock)
+{
+ might_sleep();
+ __mutex_lock(lock __RET_IP__);
+}
+
+/***
+ * mutex_unlock - release the mutex
+ * @lock: the mutex to be released
+ *
+ * Unlock a mutex that has been locked by this task previously.
+ *
+ * This function must not be used in interrupt context. Unlocking
+ * of a not locked mutex is not allowed.
+ *
+ * This function is similar to (but not equivalent to) up().
+ */
+void fastcall __sched mutex_unlock(struct mutex *lock)
+{
+ __mutex_unlock(lock __RET_IP__);
+}
+
+/***
+ * mutex_lock_interruptible - acquire the mutex, interruptable
+ * @lock: the mutex to be acquired
+ *
+ * Lock the mutex like mutex_lock(), and return 0 if the mutex has
+ * been acquired or sleep until the mutex becomes available. If a
+ * signal arrives while waiting for the lock then this function
+ * returns -EINTR.
+ *
+ * This function is similar to (but not equivalent to) down_interruptible().
+ */
+int fastcall __sched mutex_lock_interruptible(struct mutex *lock)
+{
+ might_sleep();
+ return __mutex_lock_interruptible(lock __RET_IP__);
+}
+
+EXPORT_SYMBOL(mutex_lock);
+EXPORT_SYMBOL(mutex_unlock);
+EXPORT_SYMBOL(mutex_lock_interruptible);
+
+/***
+ * mutex_init - initialize the mutex
+ * @lock: the mutex to be initialized
+ *
+ * Initialize the mutex to unlocked state.
+ *
+ * It is not allowed to initialize an already locked mutex.
+ */
+void fastcall __mutex_init(struct mutex *lock, const char *name)
+{
+ atomic_set(&lock->count, 1);
+ spin_lock_init(&lock->wait_lock);
+ INIT_LIST_HEAD(&lock->wait_list);
+
+ debug_mutex_init(lock, name);
+}
+EXPORT_SYMBOL(__mutex_init);
+
Index: linux/kernel/mutex.h
===================================================================
--- /dev/null
+++ linux/kernel/mutex.h
@@ -0,0 +1,35 @@
+/*
+ * Mutexes: blocking mutual exclusion locks
+ *
+ * started by Ingo Molnar:
+ *
+ * Copyright (C) 2004, 2005 Red Hat, Inc., Ingo Molnar <[email protected]>
+ *
+ * This file contains mutex debugging related internal prototypes, for the
+ * !CONFIG_DEBUG_MUTEXES case. Most of them are NOPs:
+ */
+
+#define spin_lock_mutex(lock) spin_lock(lock)
+#define spin_unlock_mutex(lock) spin_unlock(lock)
+#define mutex_remove_waiter(lock, waiter, ti) \
+ __list_del((waiter)->list.prev, (waiter)->list.next)
+
+#define DEBUG_WARN_ON(c) do { } while (0)
+#define debug_mutex_set_owner(lock, new_owner) do { } while (0)
+#define debug_mutex_clear_owner(lock) do { } while (0)
+#define debug_mutex_init_waiter(waiter) do { } while (0)
+#define debug_mutex_wake_waiter(lock, waiter) do { } while (0)
+#define debug_mutex_free_waiter(waiter) do { } while (0)
+#define debug_mutex_add_waiter(lock, waiter, ti, ip) do { } while (0)
+#define debug_mutex_unlock(lock) do { } while (0)
+#define debug_mutex_init(lock, name) do { } while (0)
+
+/*
+ * Return-address parameters/declarations. They are very useful for
+ * debugging, but add overhead in the !DEBUG case - so we go the
+ * trouble of using this not too elegant but zero-cost solution:
+ */
+#define __IP_DECL__
+#define __IP__
+#define __RET_IP__
+
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
