Re: [Linux 2.4.32] SATA ICH5/PIIX and Combined mode

[Adrian Bunk <bunk@stusta.de>]

On Wed, Dec 21, 2005 at 12:40:18PM +0100, Paul Rolland wrote:
> Hello,
> 
> > > I have a machine with two SATA HDD, and one PATA CDRom.
> > > Bios is configured for combined mode, and installing a RedHat ES3
> > > (Kernel 2.4.21-ELsmp) is fine, the two HDD are up, the installation
> > > is fine and the CDRom is working.
> > > 
> > > Then, upgrading to a vanilla 2.4.32, the ata_piix.c file contains
> > > a "combined mode not supported" and booting the machine hangs, as
> > > no VFS are up for root device.
> > 
> > you can't reliably run a non-NPTL kernel on RHES3. Really. Are you
> > really sure you want to ? 
> 
> Well, the other way around is to upgrade e1000 driver in the 2.4.21EL-smp,
> as the machine I'm using is quite new, and RHES3 kernel can't find the
> Ethernet device, so the machine has no network.

AFAIR, RedHat still adds support for new hardware to RHES3.

You should contact the RedHat support you are paying for for getting 
help with RHES3 running on your hardware.

> My first idea was to consider this as an opportunity to upgrade to the
> latest 2.4.x kernel, but reading you, this looks like a bad idea...
> 2.6.x would be better ?

RHES3 doesn't support kernel 2.6.

> Regards,
> Paul

cu
Adrian

-- 

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/