Last part of core driver
---
drivers/infiniband/hw/ipath/ipath_driver.c | 2380 ++++++++++++++++++++++++++++
1 files changed, 2380 insertions(+), 0 deletions(-)
f7ffc0cabd62be5e13ad84027d5712e6f92d9cc1
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index 0dee4ce..87b6dae 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -4877,3 +4877,2383 @@ static int ipath_wait_intr(ipath_portdat
}
return 0;
}
+
+/*
+ * The new implementation as of Oct 2004 is that the driver assigns
+ * the tid and returns it to the caller. To make it easier to
+ * catch bugs, and to reduce search time, we keep a cursor for
+ * each port, walking the shadow tid array to find one that's not
+ * in use.
+ *
+ * For now, if we can't allocate the full list, we fail, although
+ * in the long run, we'll allocate as many as we can, and the
+ * caller will deal with that by trying the remaining pages later.
+ * That means that when we fail, we have to mark the tids as not in
+ * use again, in our shadow copy.
+ *
+ * It's up to the caller to free the tids when they are done.
+ * We'll unlock the pages as they free them.
+ *
+ * Also, right now we are locking one page at a time, but since
+ * the intended use of this routine is for a single group of
+ * virtually contiguous pages, that should change to improve
+ * performance.
+ */
+static int ipath_tid_update(ipath_portdata * pd, struct _tidupd *tidu)
+{
+ int ret = 0, ntids;
+ uint32_t tid, porttid, cnt, i, tidcnt;
+ struct _tidupd tu;
+ uint16_t *tidlist;
+ ipath_devdata *dd = &devdata[pd->port_unit];
+ uint64_t vaddr, physaddr, lenvalid;
+ volatile uint64_t *tidbase;
+ uint64_t tidmap[8];
+ struct page **pagep = NULL;
+
+ tu.tidcnt = 0; /* for early errors */
+ if (!dd->ipath_pageshadow) {
+ ret = -ENOMEM;
+ goto done;
+ }
+ if (copy_from_user(&tu, tidu, sizeof tu)) {
+ ret = -EFAULT;
+ goto done;
+ }
+
+ if (!(cnt = tu.tidcnt)) {
+ _IPATH_DBG("After copyin, tidcnt 0, tidlist %llx\n",
+ tu.tidlist);
+ /* or should we treat as success? likely a bug */
+ ret = -EFAULT;
+ goto done;
+ }
+ tidcnt = dd->ipath_rcvtidcnt;
+ if (cnt >= tidcnt) { /* make sure it all fits in port_tid_pg_list */
+ _IPATH_INFO
+ ("Process tried to allocate %u TIDs, only trying max (%u)\n",
+ cnt, tidcnt);
+ cnt = tidcnt;
+ }
+ pagep = (struct page **)pd->port_tid_pg_list;
+ tidlist = (uint16_t *) (&pagep[cnt]);
+
+ memset(tidmap, 0, sizeof(tidmap));
+ tid = pd->port_tidcursor;
+ /* before decrement; chip actual # */
+ porttid = pd->port_port * tidcnt;
+ ntids = tidcnt;
+ tidbase = (volatile uint64_t *)((volatile char *)
+ (devdata[pd->port_unit].
+ ipath_kregbase) +
+ devdata[pd->port_unit].
+ ipath_rcvtidbase +
+ porttid * sizeof(*tidbase));
+
+ _IPATH_VDBG("Port%u %u tids, cursor %u, tidbase %p\n", pd->port_port,
+ cnt, tid, tidbase);
+
+ vaddr = tu.tidvaddr; /* virtual address of first page in transfer */
+ if (!access_ok(VERIFY_WRITE, (void *)vaddr, cnt * PAGE_SIZE)) {
+ _IPATH_DBG("Fail vaddr %llx, %u pages, !access_ok\n",
+ vaddr, cnt);
+ ret = -EFAULT;
+ goto done;
+ }
+ if ((ret = ipath_mlock((unsigned long)vaddr, cnt, pagep))) {
+ if (ret == -EBUSY) {
+ _IPATH_DBG
+ ("Failed to lock addr %p, %u pages (already locked)\n",
+ (void *)vaddr, cnt);
+ /*
+ * for now, continue, and see what happens
+ * but with the new implementation, this should
+ * never happen, unless perhaps the user has
+ * mpin'ed the pages themselves (something we
+ * need to test)
+ */
+ ret = 0;
+ } else {
+ _IPATH_INFO
+ ("Failed to lock addr %p, %u pages: errno %d\n",
+ (void *)vaddr, cnt, -ret);
+ goto done;
+ }
+ }
+ for (i = 0; i < cnt; i++, vaddr += PAGE_SIZE) {
+ for (; ntids--; tid++) {
+ if (tid == tidcnt)
+ tid = 0;
+ if (!dd->ipath_pageshadow[porttid + tid])
+ break;
+ }
+ if (ntids < 0) {
+ /*
+ * oops, wrapped all the way through their TIDs,
+ * and didn't have enough free; see comments at
+ * start of routine
+ */
+ _IPATH_DBG
+ ("Not enough free TIDs for %u pages (index %d), failing\n",
+ cnt, i);
+ i--; /* last tidlist[i] not filled in */
+ ret = -ENOMEM;
+ break;
+ }
+ tidlist[i] = tid;
+ _IPATH_VDBG("Updating idx %u to TID %u, vaddr %llx\n",
+ i, tid, vaddr);
+ /* for now we "know" system pages and TID pages are same size */
+ /* for ipath_free_tid */
+ dd->ipath_pageshadow[porttid + tid] = pagep[i];
+ __set_bit(tid, tidmap); /* don't need atomic or it's overhead */
+ physaddr = page_to_phys(pagep[i]);
+ ipath_stats.sps_pagelocks++;
+ _IPATH_VDBG("TID %u, vaddr %llx, physaddr %llx pgp %p\n",
+ tid, vaddr, physaddr, pagep[i]);
+ /*
+ * in words (fixed, full page). could make less for very last
+ * page in transfer, but for now we won't worry about it.
+ */
+ lenvalid = PAGE_SIZE >> 2;
+ lenvalid <<= INFINIPATH_RT_BUFSIZE_SHIFT;
+ physaddr |= lenvalid | INFINIPATH_RT_VALID;
+ ipath_kput_memq(pd->port_unit, &tidbase[tid], physaddr);
+ /*
+ * don't check this tid in ipath_portshadow, since we
+ * just filled it in; start with the next one.
+ */
+ tid++;
+ }
+
+ if (ret) {
+ uint32_t limit;
+ uint64_t tidval;
+ /*
+ * chip errata bug 7358, try to work around it by
+ * marking invalid tids as having max length
+ */
+ tidval =
+ (~0ULL & INFINIPATH_RT_BUFSIZE_MASK) <<
+ INFINIPATH_RT_BUFSIZE_SHIFT;
+ cleanup:
+ /* jump here if copy out of updated info failed... */
+ _IPATH_DBG("After failure (ret=%d), undo %d of %d entries\n",
+ -ret, i, cnt);
+ /* same code that's in ipath_free_tid() */
+ if ((limit = sizeof(tidmap) * _BITS_PER_BYTE) > tidcnt)
+ /* just in case size changes in future */
+ limit = tidcnt;
+ tid = find_first_bit((const unsigned long *)tidmap, limit);
+ /*
+ * chip errata bug 7358, try to work around it by
+ * marking invalid tids as having max length
+ */
+ tidval =
+ (~0ULL & INFINIPATH_RT_BUFSIZE_MASK) <<
+ INFINIPATH_RT_BUFSIZE_SHIFT;
+ for (; tid < limit; tid++) {
+ if (!test_bit(tid, tidmap))
+ continue;
+ if (dd->ipath_pageshadow[porttid + tid]) {
+ _IPATH_VDBG("Freeing TID %u\n", tid);
+ ipath_kput_memq(pd->port_unit, &tidbase[tid],
+ tidval);
+ dd->ipath_pageshadow[porttid + tid] = NULL;
+ ipath_stats.sps_pageunlocks++;
+ }
+ }
+ (void)ipath_munlock(cnt, pagep);
+ } else {
+ /*
+ * copy the updated array, with ipath_tid's filled in,
+ * back to user. Since we did the copy in already, this
+ * "should never fail"
+ * If it does, we have to clean up...
+ */
+ int r;
+ if ((r =
+ copy_to_user((void *)tu.tidlist, tidlist,
+ cnt * sizeof(*tidlist)))) {
+ _IPATH_DBG
+ ("Failed to copy out %d TIDs (%lx bytes) to %llx (ret %x)\n",
+ cnt, cnt * sizeof(*tidlist), tu.tidlist, r);
+ ret = -EFAULT;
+ goto cleanup;
+ }
+ if (copy_to_user((void *)tu.tidmap, tidmap, sizeof tidmap)) {
+ _IPATH_DBG("Failed to copy out TID map to %llx\n",
+ tu.tidmap);
+ ret = -EFAULT;
+ goto cleanup;
+ }
+ if (tid == tidcnt)
+ tid = 0;
+ pd->port_tidcursor = tid;
+ }
+
+done:
+ if (ret)
+ _IPATH_DBG
+ ("Failed to map %u TID pages, failing with %d, tidu %p\n",
+ tu.tidcnt, -ret, tidu);
+ return ret;
+}
+
+/*
+ * right now we are unlocking one page at a time, but since
+ * the intended use of this routine is for a single group of
+ * virtually contiguous pages, that should change to improve
+ * performance. We check that the TID is in range for this port
+ * but otherwise don't check validity; if user has an error and
+ * frees the wrong tid, it's only their own data that can thereby
+ * be corrupted. We do check that the TID was in use, for sanity
+ * We always use our idea of the saved address, not the address that
+ * they pass in to us.
+ */
+
+static int ipath_tid_free(ipath_portdata * pd, struct _tidupd *tidu)
+{
+ int ret = 0;
+ uint32_t tid, porttid, cnt, limit, tidcnt;
+ struct _tidupd tu;
+ ipath_devdata *dd = &devdata[pd->port_unit];
+ uint64_t *tidbase;
+ uint64_t tidmap[8];
+ uint64_t tidval;
+
+ tu.tidcnt = 0; /* for early errors */
+ if (!dd->ipath_pageshadow) {
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ if (copy_from_user(&tu, tidu, sizeof tu)) {
+ _IPATH_DBG("copy of tidupd structure failed\n");
+ ret = -EFAULT;
+ goto done;
+ }
+ if (copy_from_user(tidmap, (void *)tu.tidmap, sizeof tidmap)) {
+ _IPATH_DBG("copy of tidmap failed\n");
+ ret = -EFAULT;
+ goto done;
+ }
+
+ porttid = pd->port_port * dd->ipath_rcvtidcnt;
+ tidbase =
+ (uint64_t *) ((char *)(devdata[pd->port_unit].ipath_kregbase) +
+ devdata[pd->port_unit].ipath_rcvtidbase +
+ porttid * sizeof(*tidbase));
+
+ tidcnt = dd->ipath_rcvtidcnt;
+ if ((limit = sizeof(tidmap) * _BITS_PER_BYTE) > tidcnt)
+ limit = tidcnt; /* just in case size changes in future */
+ tid = find_first_bit((const unsigned long *)tidmap, limit);
+ _IPATH_VDBG
+ ("Port%u free %u tids; first bit (max=%d) set is %d, porttid %u\n",
+ pd->port_port, tu.tidcnt, limit, tid, porttid);
+ /*
+ * chip errata bug 7358, try to work around it by marking invalid
+ * tids as having max length
+ */
+ tidval =
+ (~0ULL & INFINIPATH_RT_BUFSIZE_MASK) << INFINIPATH_RT_BUFSIZE_SHIFT;
+ for (cnt = 0; tid < limit; tid++) {
+ /*
+ * small optimization; if we detect a run of 3 or so without
+ * any set, use find_first_bit again. That's mainly to
+ * accelerate the case where we wrapped, so we have some at
+ * the beginning, and some at the end, and a big gap
+ * in the middle.
+ */
+ if (!test_bit(tid, tidmap))
+ continue;
+ cnt++;
+ if (dd->ipath_pageshadow[porttid + tid]) {
+ _IPATH_VDBG("Freeing TID %u\n", tid);
+ ipath_kput_memq(pd->port_unit, &tidbase[tid], tidval);
+ ipath_munlock(1, &dd->ipath_pageshadow[porttid + tid]);
+ dd->ipath_pageshadow[porttid + tid] = NULL;
+ ipath_stats.sps_pageunlocks++;
+ } else
+ _IPATH_DBG("Unused tid %u, ignoring\n", tid);
+ }
+ if (cnt != tu.tidcnt)
+ _IPATH_DBG("passed in tidcnt %d, only %d bits set in map\n",
+ tu.tidcnt, cnt);
+done:
+ if (ret)
+ _IPATH_DBG("Failed to unmap %u TID pages, failing with %d\n",
+ tu.tidcnt, -ret);
+ return ret;
+}
+
+/* called from user init code, and also layered driver init */
+int ipath_setrcvhdrsize(const ipath_type mdev, unsigned rhdrsize)
+{
+ int ret = 0;
+ if (devdata[mdev].ipath_flags & IPATH_RCVHDRSZ_SET) {
+ if (devdata[mdev].ipath_rcvhdrsize != rhdrsize) {
+ _IPATH_INFO
+ ("Error: can't set protocol header size %u, already %u\n",
+ rhdrsize, devdata[mdev].ipath_rcvhdrsize);
+ ret = -EAGAIN;
+ } else
+ /* OK if set already, with same value, nothing to do */
+ _IPATH_VDBG("Reuse same protocol header size %u\n",
+ devdata[mdev].ipath_rcvhdrsize);
+ } else if (rhdrsize >
+ (devdata[mdev].ipath_rcvhdrentsize -
+ (sizeof(uint64_t) / sizeof(uint32_t)))) {
+ _IPATH_DBG
+ ("Error: can't set protocol header size %u (> max %u)\n",
+ rhdrsize,
+ devdata[mdev].ipath_rcvhdrentsize -
+ (uint32_t) (sizeof(uint64_t) / sizeof(uint32_t)));
+ ret = -EOVERFLOW;
+ } else {
+ devdata[mdev].ipath_flags |= IPATH_RCVHDRSZ_SET;
+ devdata[mdev].ipath_rcvhdrsize = rhdrsize;
+ ipath_kput_kreg(mdev, kr_rcvhdrsize,
+ devdata[mdev].ipath_rcvhdrsize);
+ _IPATH_VDBG("Set protocol header size to %u\n",
+ devdata[mdev].ipath_rcvhdrsize);
+ }
+ return ret;
+}
+
+/*
+ * find an available pio buffer, and do appropriate marking as busy, etc.
+ * returns buffer number if one found (>=0), negative number is error.
+ * Used by ipath_send_smapkt and ipath_layer_send
+ */
+int ipath_getpiobuf(int mdev)
+{
+ int i, j, starti, updated = 0;
+ unsigned piobcnt, iter;
+ unsigned long flags;
+ ipath_devdata *dd = &devdata[mdev];
+ uint64_t *shadow = dd->ipath_pioavailshadow;
+
+ piobcnt = (unsigned)dd->ipath_piobcnt;
+ starti = dd->ipath_lastport_piobuf;
+ iter = piobcnt - starti;
+ if (dd->ipath_upd_pio_shadow) {
+ /*
+ * minor optimization. If we had no buffers on last call,
+ * start out by doing the update; continue and do scan
+ * even if no buffers were updated, to be paranoid
+ */
+ ipath_update_pio_bufs(mdev);
+ /* we scanned here, don't do it at end of scan */
+ updated = 1;
+ i = starti;
+ } else
+ i = dd->ipath_lastpioindex;
+
+rescan:
+ /*
+ * while test_and_set_bit() is atomic,
+ * we do that and then the change_bit(), and the pair is not.
+ * See if this is the cause of the remaining armlaunch errors.
+ */
+ spin_lock_irqsave(&ipath_pioavail_lock, flags);
+ for (j = 0; j < iter; j++, i++) {
+ if (i >= piobcnt)
+ i = starti;
+ /*
+ * To avoid bus lock overhead, we first find a candidate
+ * buffer, then do the test and set, and continue if
+ * that fails.
+ */
+ if (test_bit((2 * i) + 1, shadow) ||
+ test_and_set_bit((2 * i) + 1, shadow)) {
+ continue;
+ }
+ /* flip generation bit */
+ change_bit(2 * i, shadow);
+ break;
+ }
+ spin_unlock_irqrestore(&ipath_pioavail_lock, flags);
+
+ if (j == iter) {
+ /*
+ * first time through; shadow exhausted, but may be
+ * real buffers available, so go see; if any updated,
+ * rescan (once)
+ */
+ if (!updated) {
+ ipath_update_pio_bufs(mdev);
+ updated = 1;
+ i = starti;
+ goto rescan;
+ }
+ dd->ipath_upd_pio_shadow = 1;
+ /* not atomic, but if we lose one once in a while, that's OK */
+ ipath_stats.sps_nopiobufs++;
+ if (!(++dd->ipath_consec_nopiobuf % 100000)) {
+ _IPATH_DBG
+ ("%u pio sends with no bufavail; dmacopy: %llx %llx %llx %llx; shadow: %llx %llx %llx %llx\n",
+ dd->ipath_consec_nopiobuf,
+ dd->ipath_pioavailregs_dma[0],
+ dd->ipath_pioavailregs_dma[1],
+ dd->ipath_pioavailregs_dma[2],
+ dd->ipath_pioavailregs_dma[3],
+ shadow[0], shadow[1], shadow[2], shadow[3]);
+ /*
+ * 4 buffers per byte, 4 registers above, cover
+ * rest below
+ */
+ if (dd->ipath_piobcnt > (sizeof(shadow[0]) * 4 * 4))
+ _IPATH_DBG
+ ("2nd group: dmacopy: %llx %llx %llx %llx; shadow: %llx %llx %llx %llx\n",
+ dd->ipath_pioavailregs_dma[4],
+ dd->ipath_pioavailregs_dma[5],
+ dd->ipath_pioavailregs_dma[6],
+ dd->ipath_pioavailregs_dma[7],
+ shadow[4], shadow[5], shadow[6],
+ shadow[7]);
+ }
+ return -EBUSY;
+ }
+
+ if (updated && dd->ipath_layer.l_intr) {
+ /*
+ * ran out of bufs, now some (at least this one we just got)
+ * are now available, so tell the layered driver.
+ */
+ dd->ipath_layer.l_intr(mdev, IPATH_LAYER_INT_SEND_CONTINUE);
+ }
+
+ /*
+ * set next starting place. Since it's just an optimization,
+ * it doesn't matter who wins on this, so no locking
+ */
+ dd->ipath_lastpioindex = i + 1;
+ if(dd->ipath_upd_pio_shadow)
+ dd->ipath_upd_pio_shadow = 0;
+ if(dd->ipath_consec_nopiobuf)
+ dd->ipath_consec_nopiobuf = 0;
+ return i;
+}
+
+/*
+ * this is like ipath_getpiobuf(), except it just probes to see if a buffer
+ * is available. If it returns that there is one, it's not allocated,
+ * and so may not be available if caller tries to send.
+ * NOTE: This can be called from interrupt context by ipath_intr()
+ * and from non-interrupt context by layer_send_getpiobuf().
+ */
+int ipath_bufavail(int mdev)
+{
+ int i;
+ unsigned piobcnt;
+ uint64_t *shadow = devdata[mdev].ipath_pioavailshadow;
+
+ piobcnt = (unsigned)devdata[mdev].ipath_piobcnt;
+
+ for (i = devdata[mdev].ipath_lastport_piobuf; i < piobcnt; i++)
+ if (!test_bit((2 * i) + 1, shadow))
+ return 1;
+
+ /* if none, check for update and rescan if we updated */
+ ipath_update_pio_bufs(mdev);
+ for (i = devdata[mdev].ipath_lastport_piobuf; i < piobcnt; i++)
+ if (!test_bit((2 * i) + 1, shadow))
+ return 1;
+ _IPATH_PDBG("No bufs avail\n");
+ return 0;
+}
+
+/*
+ * This routine is no longer on any critical paths; it is used only
+ * for sending SMA packets, but that could change in the future, so it
+ * should be kept pretty tight, with anything that
+ * increases the cache footprint, adds branches, etc. carefully
+ * examined, and if needed only for unusual cases, should, be moved out to
+ * a separate routine, or out of the main execution path.
+ * Because it's currently sma only, there are no checks to see if the
+ * link is up; sma must be able to send in the not fully initialized state
+ */
+int ipath_send_smapkt(struct ipath_sendpkt * upkt)
+{
+ int i, ret = 0, whichpb;
+ uint32_t *piobuf, plen = 0, clen;
+ uint64_t pboff;
+ struct ipath_sendpkt kpkt;
+ struct ipath_iovec *iov = kpkt.sps_iov;
+ ipath_type t;
+
+ if (unlikely((copy_from_user(&kpkt, upkt, sizeof kpkt))))
+ ret = -EFAULT;
+ if (ret) {
+ _IPATH_VDBG("Send failed: error %d\n", -ret);
+ goto done;
+ }
+ t = kpkt.sps_flags;
+ if (t >= infinipath_max || !(devdata[t].ipath_flags & IPATH_PRESENT) ||
+ !devdata[t].ipath_kregbase) {
+ _IPATH_SMADBG("illegal unit %u for sma send\n", t);
+ return -ENODEV;
+ }
+ if (!(devdata[t].ipath_flags & IPATH_INITTED)) {
+ /* no hardware, freeze, etc. */
+ _IPATH_SMADBG("unit %u not usable\n", t);
+ return -ENODEV;
+ }
+
+ /* need total length before first word written */
+ plen = sizeof(uint32_t); /* +1 word is for the qword padding */
+ for (i = 0; i < kpkt.sps_cnt; i++)
+ /* each must be dword multiple */
+ plen += kpkt.sps_iov[i].iov_len;
+
+ if ((plen + 4) > devdata[t].ipath_ibmaxlen) {
+ _IPATH_DBG("Pkt len 0x%x > ibmaxlen %x!\n", plen - 4,
+ devdata[t].ipath_ibmaxlen);
+ ret = -EINVAL;
+ goto done; /* before writing pbc */
+ }
+ plen >>= 2; /* in words */
+
+ whichpb = ipath_getpiobuf(t);
+ if (whichpb < 0) {
+ ret = whichpb;
+ devdata[t].ipath_nosma_bufs++;
+ _IPATH_SMADBG("No PIO buffers available unit %u %u times\n",
+ t, devdata[t].ipath_nosma_bufs);
+ goto done;
+ }
+ if(devdata[t].ipath_nosma_bufs) {
+ _IPATH_SMADBG(
+ "Unit %u got SMA send buffer after %u failures, %u seconds\n",
+ t, devdata[t].ipath_nosma_bufs, devdata[t].ipath_nosma_secs);
+ devdata[t].ipath_nosma_bufs = 0;
+ devdata[t].ipath_nosma_secs = 0;
+ }
+ if((devdata[t].ipath_lastibcstat & 0x11) != 0x11 &&
+ (devdata[t].ipath_lastibcstat & 0x21) != 0x21) {
+ /* we need to be at least at INIT for SMA packets to go out. If we
+ * aren't, something has gone wrong, and SMA hasn't noticed.
+ * Therefore we'll try to go to INIT here, in hopes of fixing up the
+ * problem. First we verify that indeed the state is still "bad"
+ * (that is, that lastibcstat * isn't "stale") */
+ uint64_t val;
+ val = ipath_kget_kreg64(t, kr_ibcstatus);
+ if((val & 0x11) != 0x11 && (val & 0x21) != 0x21) {
+ _IPATH_SMADBG("Invalid Link state 0x%llx unit %u for send, try INIT\n",
+ val, t);
+ ipath_set_ib_lstate(t, INFINIPATH_IBCC_LINKCMD_INIT);
+ val = ipath_kget_kreg64(t, kr_ibcstatus);
+ if((val & 0x11) != 0x11 && (val & 0x21) != 0x21)
+ _IPATH_SMADBG("Link state still not OK unit %u (0x%llx) after INIT\n",
+ t, val);
+ else
+ _IPATH_SMADBG("Link state OK unit %u (0x%llx) after INIT\n",
+ t, val);
+ }
+ /* and continue, regardless */
+ }
+
+ pboff = devdata[t].ipath_piobufbase;
+ piobuf = (uint32_t *) (((char *)(devdata[t].ipath_kregbase)) + pboff
+ + whichpb * devdata[t].ipath_palign);
+
+ if(infinipath_debug & __IPATH_PKTDBG) // SMA and PKT, both
+ _IPATH_SMADBG("unit %u 0x%x+1w pio%d, (scnt %d)\n",
+ t, plen - 1, whichpb, kpkt.sps_cnt);
+
+ ret = 0;
+ clen = 2; /* size of the pbc */
+ {
+ /*
+ * If this code ever gets used for anything performance
+ * oriented, or that isn't inherently single-threaded,
+ * then I need to implement the original idea of our
+ * own equivalent of copy_from_user that uses only dword
+ * or qword copies. copy_from_user() can use byte copies,
+ * and that is a problem for our chip.
+ */
+ static uint32_t tmpbuf[2176 / sizeof(uint32_t)];
+ *(uint64_t *) tmpbuf = (uint64_t) plen;
+ for (i = 0; i < kpkt.sps_cnt; i++) {
+ if (unlikely
+ (copy_from_user
+ (tmpbuf + clen, (void *)iov->iov_base,
+ iov->iov_len)))
+ ret = -EFAULT; /* no break */
+ clen += iov->iov_len >> 2;
+ iov++;
+ }
+ ipath_dwordcpy(piobuf, tmpbuf, clen);
+ }
+
+ /* flush the packet out now, don't leave it waiting around */
+ mb();
+
+ if (ret) {
+ /*
+ * Packet is bad, so we need to use the PIO abort mechanism to
+ * abort the packet
+ */
+ uint32_t sendctrl;
+ sendctrl = devdata[t].ipath_sendctrl | INFINIPATH_S_DISARM |
+ (whichpb << INFINIPATH_S_DISARMPIOBUF_SHIFT);
+ _IPATH_DBG("Doing PIO abort on buffer %u after error\n",
+ whichpb);
+ ipath_kput_kreg(t, kr_sendctrl, sendctrl);
+ }
+
+done:
+ return ret;
+}
+
+/*
+ * implemention of the ioctl to get the counter values from the chip
+ * For the time being, we get all of them when asked, no shadowing.
+ * We need to shadow the byte counters at a minimum, because otherwise
+ * they will wrap in just a few seconds at full bandwidth
+ * The second argument is the user address to which we do the copy_to_user()
+ */
+static int ipath_get_counters(ipath_type t,
+ struct infinipath_counters * ucounters)
+{
+ int ret = 0;
+ uint64_t val;
+ uint64_t *ucreg;
+ uint16_t vcreg;
+
+ ucreg = (uint64_t *) ucounters;
+ /*
+ * for now, let's do this one at a time. It's not the most
+ * optimal method, but it is simple, and has no intermediate
+ * memory requirements.
+ */
+ for (vcreg = 0;
+ vcreg < (sizeof(struct infinipath_counters) / sizeof(val));
+ vcreg++, ucreg++) {
+ ipath_creg creg = vcreg;
+ val = ipath_snap_cntr(t, creg);
+ if ((ret = copy_to_user(ucreg, &val, sizeof(val)))) {
+ _IPATH_DBG("copy_to_user error on counter %d\n", creg);
+ break;
+ }
+ }
+
+ return ret;
+}
+
+/*
+ * implemention of the ioctl to get the stats values from the driver
+ * The argument is the user address to which we do the copy_to_user()
+ */
+static int ipath_get_stats(struct infinipath_stats *ustats)
+{
+ int ret = 0;
+
+ if ((ret = copy_to_user(ustats, &ipath_stats, sizeof(ipath_stats))))
+ _IPATH_DBG("copy_to_user error on driver stats\n");
+
+ return ret;
+}
+
+/* set a partition key. We can have up to 4 active at a time (other than
+ * the default, which is always allowed). This is somewhat tricky, since
+ * multiple ports may set the same key, so we reference count them, and
+ * clean up at exit. All 4 partition keys are packed into a single
+ * infinipath register. It's an error for a process to set the same
+ * pkey multiple times. We provide no mechanism to de-allocate a pkey
+ * at this time, we may eventually need to do that.
+ * I've used the atomic operations, and no locking, and only make a single
+ * pass through what's available. This should be more than adequate for
+ * some time. I'll think about spinlocks or the like if and as it's necessary
+ */
+static int ipath_set_partkey(ipath_portdata *pd, uint16_t key)
+{
+ ipath_devdata *dd;
+ int i, any = 0, pidx = -1;
+ uint16_t lkey = key & 0x7FFF;
+
+ dd = &devdata[pd->port_unit];
+
+ if (lkey == (IPS_DEFAULT_P_KEY & 0x7FFF)) {
+ /* nothing to do; this key always valid */
+ return 0;
+ }
+
+ _IPATH_VDBG
+ ("p%u try to set pkey %hx, current keys %hx:%x %hx:%x %hx:%x %hx:%x\n",
+ pd->port_port, key, dd->ipath_pkeys[0],
+ atomic_read(&dd->ipath_pkeyrefs[0]), dd->ipath_pkeys[1],
+ atomic_read(&dd->ipath_pkeyrefs[1]), dd->ipath_pkeys[2],
+ atomic_read(&dd->ipath_pkeyrefs[2]), dd->ipath_pkeys[3],
+ atomic_read(&dd->ipath_pkeyrefs[3]));
+
+ if (!lkey) {
+ _IPATH_PRDBG("p%u tries to set key 0, not allowed\n",
+ pd->port_port);
+ return -EINVAL;
+ }
+
+ /*
+ * Set the full membership bit, because it has to be
+ * set in the register or the packet, and it seems
+ * cleaner to set in the register than to force all
+ * callers to set it. (see bug 4331)
+ */
+ key |= 0x8000;
+
+ for (i = 0; i < ARRAY_SIZE(pd->port_pkeys); i++) {
+ if (!pd->port_pkeys[i] && pidx == -1)
+ pidx = i;
+ if (pd->port_pkeys[i] == key) {
+ _IPATH_VDBG
+ ("p%u tries to set same pkey (%x) more than once\n",
+ pd->port_port, key);
+ return -EEXIST;
+ }
+ }
+ if (pidx == -1) {
+ _IPATH_DBG
+ ("All pkeys for port %u already in use, can't set %x\n",
+ pd->port_port, key);
+ return -EBUSY;
+ }
+ for (any = i = 0; i < ARRAY_SIZE(dd->ipath_pkeys); i++) {
+ if (!dd->ipath_pkeys[i]) {
+ any++;
+ continue;
+ }
+ if (dd->ipath_pkeys[i] == key) {
+ if (atomic_inc_return(&dd->ipath_pkeyrefs[i]) > 1) {
+ pd->port_pkeys[pidx] = key;
+ _IPATH_VDBG
+ ("p%u set key %x matches #%d, count now %d\n",
+ pd->port_port, key, i,
+ atomic_read(&dd->ipath_pkeyrefs[i]));
+ return 0;
+ } else {
+ /* lost race, decrement count, catch below */
+ atomic_dec(&dd->ipath_pkeyrefs[i]);
+ _IPATH_VDBG
+ ("Lost race, count was 0, after dec, it's %d\n",
+ atomic_read(&dd->ipath_pkeyrefs[i]));
+ any++;
+ }
+ }
+ if ((dd->ipath_pkeys[i] & 0x7FFF) == lkey) {
+ /*
+ * It makes no sense to have both the limited and full
+ * membership PKEY set at the same time since the
+ * unlimited one will disable the limited one.
+ */
+ return -EEXIST;
+ }
+ }
+ if (!any) {
+ _IPATH_DBG
+ ("port %u, all pkeys already in use, can't set %x\n",
+ pd->port_port, key);
+ return -EBUSY;
+ }
+ for (any = i = 0; i < ARRAY_SIZE(dd->ipath_pkeys); i++) {
+ if (!dd->ipath_pkeys[i] &&
+ atomic_inc_return(&dd->ipath_pkeyrefs[i]) == 1) {
+ uint64_t pkey;
+
+ /* for ipathstats, etc. */
+ ipath_stats.sps_pkeys[i] = lkey;
+ pd->port_pkeys[pidx] = dd->ipath_pkeys[i] = key;
+ pkey =
+ (uint64_t) dd->ipath_pkeys[0] |
+ ((uint64_t) dd->ipath_pkeys[1] << 16) |
+ ((uint64_t) dd->ipath_pkeys[2] << 32) |
+ ((uint64_t) dd->ipath_pkeys[3] << 48);
+ _IPATH_PRDBG
+ ("p%u set key %x in #%d, portidx %d, new pkey reg %llx\n",
+ pd->port_port, key, i, pidx, pkey);
+ ipath_kput_kreg(pd->port_unit, kr_partitionkey, pkey);
+
+ return 0;
+ }
+ }
+ _IPATH_DBG
+ ("port %u, all pkeys already in use 2nd pass, can't set %x\n",
+ pd->port_port, key);
+ return -EBUSY;
+}
+
+/*
+ * stop_start == 0 disables receive on the port, for use in queue overflow
+ * conditions. stop_start==1 re-enables, and returns value of tail register,
+ * to be used to re-init the software copy of the head register
+ */
+
+static int ipath_manage_rcvq(ipath_portdata * pd, uint16_t start_stop)
+{
+ ipath_devdata *dd;
+ /*
+ * This needs to be volatile, so that the compiler doesn't
+ * optimize away the read to the device's mapped memory.
+ */
+ volatile uint64_t tval;
+
+ dd = &devdata[pd->port_unit];
+ _IPATH_PRDBG("%sabling rcv for unit %u port %u\n",
+ start_stop ? "en" : "dis", pd->port_unit, pd->port_port);
+ /* atomically clear receive enable port. */
+ if (start_stop) {
+ /*
+ * on enable, force in-memory copy of the tail register
+ * to 0, so that protocol code doesn't have to worry
+ * about whether or not the chip has yet updated
+ * the in-memory copy or not on return from the system
+ * call. The chip always resets it's tail register back
+ * to 0 on a transition from disabled to enabled.
+ * This could cause a problem if software was broken,
+ * and did the enable w/o the disable, but eventually
+ * the in-memory copy will be updated and correct
+ * itself, even in the face of software bugs.
+ */
+ *pd->port_rcvhdrtail_kvaddr = 0;
+ atomic_set_mask(1U <<
+ (INFINIPATH_R_PORTENABLE_SHIFT + pd->port_port),
+ &dd->ipath_rcvctrl);
+ } else
+ atomic_clear_mask(1U <<
+ (INFINIPATH_R_PORTENABLE_SHIFT +
+ pd->port_port), &dd->ipath_rcvctrl);
+ ipath_kput_kreg(pd->port_unit, kr_rcvctrl, dd->ipath_rcvctrl);
+ /* now be sure chip saw it before we return */
+ tval = ipath_kget_kreg64(pd->port_unit, kr_scratch);
+ if (start_stop) {
+ /*
+ * and try to be sure that tail reg update has happened
+ * too. This should in theory interlock with the RXE
+ * changes to the tail register. Don't assign it to
+ * the tail register in memory copy, since we could
+ * overwrite an update by the chip if we did.
+ */
+ tval =
+ ipath_kget_ureg32(pd->port_unit, ur_rcvhdrtail,
+ pd->port_port);
+ }
+ /* always; new head should be equal to new tail; see above */
+ return 0;
+}
+
+/*
+ * This routine is now quite different for user and kernel, because
+ * the kernel uses skb's, for the accelerated network performance
+ * This is the user port version
+ *
+ * allocate the eager TID buffers and program them into infinipath
+ * They are no longer completely contiguous, we do multiple
+ * alloc_pages() calls.
+ */
+static int ipath_create_user_egr(ipath_portdata * pd)
+{
+ char *buf;
+ ipath_devdata *dd = &devdata[pd->port_unit];
+ uint64_t *egrbase, egroff, lenvalid;
+ unsigned e, egrcnt, alloced, order, egrperchunk, chunk;
+ unsigned long pa, pent;
+
+ egrcnt = dd->ipath_rcvegrcnt;
+ egroff =
+ dd->ipath_rcvegrbase + pd->port_port * egrcnt * sizeof(*egrbase);
+ egrbase = (uint64_t *) ((char *)(dd->ipath_kregbase) + egroff);
+ _IPATH_VDBG("Allocating %d egr buffers, at chip offset %llx (%p)\n",
+ egrcnt, egroff, egrbase);
+
+ /*
+ * to avoid wasting a lot of memory, we allocate 32KB chunks of
+ * physically contiguous memory, advance through it until used up
+ * and then allocate more. Of course, we need memory to store
+ * those extra pointers, now. Started out with 256KB, but under
+ * heavy memory pressure (creating large files and then copying
+ * them over NFS while doing lots of MPI jobs), we hit some
+ * alloc_pages() failures, even though we can sleep... (2.6.10)
+ * Still get failures at 64K. 32K is the lowest we can go without
+ * waiting more memory again. It seems likely that the coalescing
+ * in free_pages, etc. still has issues (as it has had previously
+ * during 2.6.x development).
+ */
+ order = get_order(0x8000);
+ alloced =
+ round_up(dd->ipath_rcvegrbufsize * egrcnt,
+ (1 << order) * PAGE_SIZE);
+ egrperchunk = ((1 << order) * PAGE_SIZE) / dd->ipath_rcvegrbufsize;
+ chunk = (egrcnt + egrperchunk - 1) / egrperchunk;
+ pd->port_rcvegrbuf_chunks = chunk;
+ pd->port_rcvegrbufs_perchunk = egrperchunk;
+ pd->port_rcvegrbuf_order = order;
+ pd->port_rcvegrbuf_pages =
+ vmalloc(chunk * sizeof(pd->port_rcvegrbuf_pages[0]));
+ pd->port_rcvegrbuf_virt =
+ vmalloc(chunk * sizeof(pd->port_rcvegrbuf_virt[0]));
+ if (!pd->port_rcvegrbuf_pages || !pd->port_rcvegrbuf_pages) {
+ _IPATH_UNIT_ERROR(pd->port_unit,
+ "Unable to allocate %u EGR buffer array pointers\n",
+ chunk);
+ if (pd->port_rcvegrbuf_pages) {
+ vfree(pd->port_rcvegrbuf_pages);
+ pd->port_rcvegrbuf_pages = NULL;
+ }
+ return -ENOMEM;
+ }
+ for (e = 0; e < pd->port_rcvegrbuf_chunks; e++) {
+ /*
+ * GFP_USER, but without GFP_FS, so buffer cache can
+ * be coalesced (we hope); otherwise, even at order 4, heavy
+ * filesystem activity makes these fail
+ */
+ if (!
+ (pd->port_rcvegrbuf_pages[e] =
+ alloc_pages(__GFP_WAIT | __GFP_IO, order))) {
+ _IPATH_UNIT_ERROR(pd->port_unit,
+ "Unable to allocate EGR buffer array %u/%u\n",
+ e, pd->port_rcvegrbuf_chunks);
+ vfree(pd->port_rcvegrbuf_pages);
+ pd->port_rcvegrbuf_pages = NULL;
+ vfree(pd->port_rcvegrbuf_virt);
+ pd->port_rcvegrbuf_virt = NULL;
+ return -ENOMEM;
+ }
+ }
+
+ /*
+ * calculate physical, then phys_to_virt()
+ * so that we get an address that fits in 64 bits, so we can use
+ * mmap64 from 32 bit programs on the chip and kernel virtual
+ * addresses (mmap64 for 32 bit programs on i386 and x86_64
+ * only has 44 bits of address, because it uses mmap2())
+ * We do this with the first chunk; We don't need a kernel
+ * virtually contiguous address to give the user virtually
+ * contiguous mappings. It just complicates the nopage routine
+ * a little tiny bit ;)
+ */
+ buf = page_address(pd->port_rcvegrbuf_pages[0]);
+ pa = virt_to_phys(buf);
+ pd->port_rcvegr_phys = pa;
+
+ /* in words */
+ lenvalid = (dd->ipath_rcvegrbufsize - pd->port_egrskip) >> 2;
+ _IPATH_VDBG
+ ("port%u egrbuf vaddr %p, cpu %d, egrskip %u, len %llx words\n",
+ pd->port_port, buf, smp_processor_id(), pd->port_egrskip,
+ lenvalid);
+ lenvalid <<= INFINIPATH_RT_BUFSIZE_SHIFT;
+ lenvalid |= INFINIPATH_RT_VALID;
+
+ for (e = chunk = 0; chunk < pd->port_rcvegrbuf_chunks; chunk++) {
+ int i, n;
+ struct page *p;
+ p = pd->port_rcvegrbuf_pages[chunk];
+ pa = page_to_phys(p);
+ buf = page_address(p);
+ /*
+ * stash away for later use, since page_address() lookup
+ * is not cheap
+ */
+ pd->port_rcvegrbuf_virt[chunk] = buf;
+ if (pa & ~INFINIPATH_RT_ADDR_MASK)
+ _IPATH_INFO
+ ("physaddr %lx has more than 40 bits, using only 40!\n",
+ pa);
+ n = 1 << pd->port_rcvegrbuf_order;
+ for (i = 0; i < n; i++)
+ SetPageReserved(virt_to_page(buf + (i * PAGE_SIZE)));
+
+ /* clear buffer for security, sanity, and, debugging */
+ memset(buf, 0, PAGE_SIZE * n);
+
+ for (i = 0; e < egrcnt && i < egrperchunk; e++, i++) {
+ pent =
+ ((pa +
+ pd->
+ port_egrskip) & INFINIPATH_RT_ADDR_MASK) |
+ lenvalid;
+
+ ipath_kput_memq(pd->port_unit, &egrbase[e], pent);
+ _IPATH_VDBG("egr %u phys %lx val %lx\n", e, pa, pent);
+ pa += dd->ipath_rcvegrbufsize;
+ }
+ yield(); /* don't hog the cpu */
+ }
+
+ return 0;
+}
+
+/*
+ * This routine is now quite different for user and kernel, because
+ * the kernel uses skb's, for the accelerated network performance
+ * This is the kernel (port0) version
+ *
+ * Allocate the eager TID buffers and program them into infinipath.
+ * We use the network layer alloc_skb() allocator to allocate the memory, and
+ * either use the buffers as is for things like SMA packets, or pass
+ * the buffers up to the ipath layered driver and thence the network layer,
+ * replacing them as we do so (see ipath_kreceive())
+ */
+static int ipath_create_port0_egr(ipath_portdata * pd)
+{
+ int ret = 0;
+ uint64_t *egrbase, egroff;
+ unsigned e, egrcnt;
+ ipath_devdata *dd;
+ struct sk_buff **skbs;
+
+ dd = &devdata[pd->port_unit];
+ egrcnt = dd->ipath_rcvegrcnt;
+ egroff =
+ dd->ipath_rcvegrbase + pd->port_port * egrcnt * sizeof(*egrbase);
+ egrbase = (uint64_t *) ((char *)(dd->ipath_kregbase) + egroff);
+ _IPATH_VDBG
+ ("unit%u Allocating %d egr buffers, at chip offset %llx (%p)\n",
+ pd->port_unit, egrcnt, egroff, egrbase);
+
+ skbs = vmalloc(sizeof(*dd->ipath_port0_skbs) * egrcnt);
+ if (skbs == NULL)
+ ret = -ENOMEM;
+ else {
+ for (e = 0; e < egrcnt; e++) {
+ /*
+ * This is a bit tricky in that we allocate
+ * extra space for 2 bytes of the 14 byte
+ * ethernet header. These two bytes are passed
+ * in the ipath header so the rest of the data
+ * is word aligned. We allocate 4 bytes so that the
+ * data buffer stays word aligned.
+ * See ipath_kreceive() for more details.
+ */
+ skbs[e] =
+ __dev_alloc_skb(dd->ipath_ibmaxlen + 4, GFP_KERNEL);
+ if (skbs[e] == NULL) {
+ _IPATH_UNIT_ERROR(pd->port_unit,
+ "SKB allocation error for eager TID %u\n",
+ e);
+ while (e != 0)
+ dev_kfree_skb(skbs[--e]);
+ ret = -ENOMEM;
+ break;
+ }
+ skb_reserve(skbs[e], 4);
+ }
+ }
+ /*
+ * after loop above, so we can test non-NULL
+ * to see if ready to use at receive, etc. Hope this fixes some
+ * panics.
+ */
+ dd->ipath_port0_skbs = skbs;
+
+ /*
+ * have to tell chip each time we init it
+ * even if we are re-using previous memory.
+ */
+ if (!ret) {
+ uint64_t lenvalid; /* in words */
+
+ lenvalid = (dd->ipath_ibmaxlen - pd->port_egrskip) >> 2;
+ lenvalid <<= INFINIPATH_RT_BUFSIZE_SHIFT;
+ lenvalid |= INFINIPATH_RT_VALID;
+ for (e = 0; e < egrcnt; e++) {
+ unsigned long pa, pent;
+
+ pa = virt_to_phys(dd->ipath_port0_skbs[e]->data);
+ pa += pd->port_egrskip;
+ if (!e && (pa & ~INFINIPATH_RT_ADDR_MASK))
+ _IPATH_INFO
+ ("phys addr %lx has more than 40 bits, using only 40!!!\n",
+ pa);
+ pent = (pa & INFINIPATH_RT_ADDR_MASK) | lenvalid;
+ /*
+ * don't need this except extreme debugging,
+ * but leaving to save future typing.
+ * _IPATH_VDBG("egr[%d] %p <- %lx\n", e, &egrbase[e], pent);
+ */
+ ipath_kput_memq(pd->port_unit, &egrbase[e], pent);
+ }
+ yield(); /* don't hog the cpu */
+ }
+
+ return ret;
+}
+
+/*
+ * this *must* be physically contiguous memory, and for now,
+ * that limits it to what kmalloc can do.
+ */
+static int ipath_create_rcvhdrq(ipath_portdata * pd)
+{
+ int i, ret = 0, amt, order, pgs;
+ char *qt;
+ struct page *p;
+ unsigned long pa, pa0;
+
+ amt = round_up(devdata[pd->port_unit].ipath_rcvhdrcnt
+ * devdata[pd->port_unit].ipath_rcvhdrentsize *
+ sizeof(uint32_t), PAGE_SIZE);
+ if (!pd->port_rcvhdrq) {
+ order = get_order(amt);
+ /*
+ * not using REPEAT isn't viable; at 128KB, we can easily fail
+ * this. The problem with REPEAT is we can block here
+ * "forever". There isn't an inbetween, unfortunately.
+ * We could reduce the risk by never freeing the rcvhdrq
+ * except at unload, but even then, the first time a
+ * port is used, we could delay for some time...
+ */
+ p = alloc_pages(GFP_USER, order);
+ if (!p) {
+ _IPATH_UNIT_ERROR(pd->port_unit,
+ "attempt to allocate order %u memory for port %u rcvhdrq failed\n",
+ order, pd->port_port);
+ return -ENOMEM;
+ }
+
+ /*
+ * should use kmap (and later kunmap), even though high mem will
+ * always be mapped on x86_64, to play it safe, but for some
+ * bizarre reason these aren't exported symbols...
+ */
+ pd->port_rcvhdrq = page_address(p);
+ if (!virt_addr_valid(pd->port_rcvhdrq)) {
+ _IPATH_DBG
+ ("weird, virt_addr_valid false right after alloc_pages\n");
+ _IPATH_DBG("__pa(%p) is %lx, num_physpages %lx\n",
+ pd->port_rcvhdrq, __pa(pd->port_rcvhdrq),
+ num_physpages);
+ }
+ pd->port_rcvhdrq_phys = virt_to_phys(pd->port_rcvhdrq);
+ pd->port_rcvhdrq_order = order;
+
+ pa0 = pd->port_rcvhdrq_phys;
+ pgs = amt >> PAGE_SHIFT;
+ _IPATH_VDBG
+ ("%d pages at %p (phys %lx) order=%u for port %u rcvhdr Q\n",
+ pgs, pd->port_rcvhdrq, pa0, pd->port_rcvhdrq_order,
+ pd->port_port);
+
+ /*
+ * verify it's really physically contiguous, to be paranoid
+ * also mark pages as reserved, to avoid problems when
+ * user process with them mapped then exits.
+ */
+ qt = pd->port_rcvhdrq;
+ SetPageReserved(virt_to_page(qt));
+ qt += PAGE_SIZE;
+ for (pa = pa0, i = 1; i < pgs; i++, qt += PAGE_SIZE) {
+ SetPageReserved(virt_to_page(qt));
+ pa = virt_to_phys(qt);
+ if (pa != (pa0 + (i * PAGE_SIZE)))
+ _IPATH_INFO
+ ("pg %d at %p phys %lx not contiguous\n", i,
+ qt, pa);
+ else
+ _IPATH_VDBG("pg %d at %p phys %lx\n", i, qt,
+ pa);
+ }
+ }
+
+ /*
+ * clear for security, sanity, and/or debugging (each time we
+ * use/reuse)
+ */
+ memset(pd->port_rcvhdrq, 0, amt);
+
+ /*
+ * tell chip each time we init it, even if we are re-using previous
+ * memory (we zero it at process close)
+ */
+ _IPATH_VDBG("writing port %d rcvhdraddr as %lx\n", pd->port_port,
+ pd->port_rcvhdrq_phys);
+ ipath_kput_kreg_port(pd->port_unit, kr_rcvhdraddr, pd->port_port,
+ pd->port_rcvhdrq_phys);
+
+ return ret;
+}
+
+#ifdef _IPATH_EXTRA_DEBUG
+/*
+ * occasionally useful to dump the full set of kernel registers for debugging.
+ */
+static void ipath_dump_allregs(char *what, ipath_type t)
+{
+ uint16_t reg;
+ _IPATH_DBG("%s\n", what);
+ for (reg = 0; reg <= 0x100; reg++) {
+ uint64_t v = ipath_kget_kreg64(t, reg);
+ if (!(reg % 4))
+ printk("\n%3x: ", reg);
+ printk("%16llx ", v);
+ }
+ printk("\n");
+}
+#endif /* _IPATH_EXTRA_DEBUG */
+
+/*
+ * Do the actual initialization sequence on the chip. For the real
+ * hardware, this is done from the init routine called from the PCI
+ * infrastructure.
+ */
+int ipath_init_chip(const ipath_type t)
+{
+ int ret = 0, i;
+ uint32_t val32, kpiobufs;
+ uint64_t val, atmp;
+ volatile uint32_t *piobuf;
+ uint32_t pioincr;
+ ipath_devdata *dd = &devdata[t];
+ ipath_portdata *pd;
+ struct page *vpage;
+ char boardn[32];
+
+ /* first time only, set after static version info */
+ if (!chip_driver_version) {
+ i = strlen(ipath_core_version);
+ chip_driver_version = ipath_core_version + i;
+ chip_driver_size = sizeof ipath_core_version - i;
+ }
+
+ /*
+ * have to clear shadow copies of registers at init that are not
+ * otherwise set here, or all kinds of bizarre things happen with
+ * driver on chip reset
+ */
+ dd->ipath_rcvhdrsize = 0;
+
+ /*
+ * don't clear ipath_flags as 8bit mode was set before entering
+ * this func. However, we do set the linkstate to unknown
+ */
+
+ /* so we can watch for a transition */
+ dd->ipath_flags |= IPATH_LINKUNK;
+ dd->ipath_flags &= ~(IPATH_LINKACTIVE | IPATH_LINKARMED | IPATH_LINKDOWN
+ | IPATH_LINKINIT);
+
+ _IPATH_VDBG("Try to read spc chip revision\n");
+ dd->ipath_revision = ipath_kget_kreg64(t, kr_revision);
+
+ /*
+ * set up fundamental info we need to use the chip; we assume if
+ * the revision reg and these regs are OK, we don't need to special
+ * case the rest
+ */
+ dd->ipath_sregbase = ipath_kget_kreg32(t, kr_sendregbase);
+ dd->ipath_cregbase = ipath_kget_kreg32(t, kr_counterregbase);
+ dd->ipath_uregbase = ipath_kget_kreg32(t, kr_userregbase);
+ _IPATH_VDBG("ipath_kregbase %p, sendbase %x usrbase %x, cntrbase %x\n",
+ dd->ipath_kregbase, dd->ipath_sregbase, dd->ipath_uregbase,
+ dd->ipath_cregbase);
+ if ((dd->ipath_revision & 0xffffffff) == 0xffffffff ||
+ (dd->ipath_sregbase & 0xffffffff) == 0xffffffff ||
+ (dd->ipath_cregbase & 0xffffffff) == 0xffffffff ||
+ (dd->ipath_uregbase & 0xffffffff) == 0xffffffff) {
+ _IPATH_UNIT_ERROR(t,
+ "Register read failures from chip, giving up initialization\n");
+ ret = -ENODEV;
+ goto done;
+ }
+
+ /* clear the initial reset flag, in case first driver load */
+ ipath_kput_kreg(t, kr_errorclear, INFINIPATH_E_RESET);
+
+ dd->ipath_portcnt = ipath_kget_kreg32(t, kr_portcnt);
+ if (!infinipath_cfgports)
+ dd->ipath_cfgports = dd->ipath_portcnt;
+ else if (infinipath_cfgports <= dd->ipath_portcnt) {
+ dd->ipath_cfgports = infinipath_cfgports;
+ _IPATH_DBG("Configured to use %u ports out of %u in chip\n",
+ dd->ipath_cfgports, dd->ipath_portcnt);
+ } else {
+ dd->ipath_cfgports = dd->ipath_portcnt;
+ _IPATH_DBG
+ ("Tried to configured to use %u ports; chip only supports %u\n",
+ infinipath_cfgports, dd->ipath_portcnt);
+ }
+ dd->ipath_pd = kmalloc(sizeof(*dd->ipath_pd) * dd->ipath_cfgports,
+ GFP_KERNEL);
+ if (!dd->ipath_pd) {
+ _IPATH_UNIT_ERROR(t,
+ "Unable to allocate portdata array, failing\n");
+ ret = -ENOMEM;
+ goto done;
+ }
+ memset(dd->ipath_pd, 0, sizeof(*dd->ipath_pd) * dd->ipath_cfgports);
+
+ dd->ipath_lastegrheads = kmalloc(sizeof(*dd->ipath_lastegrheads)
+ * dd->ipath_cfgports, GFP_KERNEL);
+ dd->ipath_lastrcvhdrqtails = kmalloc(sizeof(*dd->ipath_lastrcvhdrqtails)
+ * dd->ipath_cfgports, GFP_KERNEL);
+ if (!dd->ipath_lastegrheads || !dd->ipath_lastrcvhdrqtails) {
+ _IPATH_UNIT_ERROR(t,
+ "Unable to allocate head arrays, failing\n");
+ ret = -ENOMEM;
+ goto done;
+ }
+ memset(dd->ipath_lastrcvhdrqtails, 0,
+ sizeof(*dd->ipath_lastrcvhdrqtails)
+ * dd->ipath_cfgports);
+ memset(dd->ipath_lastegrheads, 0, sizeof(*dd->ipath_lastegrheads)
+ * dd->ipath_cfgports);
+
+ dd->ipath_pd[0] = kmalloc(sizeof(ipath_portdata), GFP_KERNEL);
+ if (!dd->ipath_pd[0]) {
+ _IPATH_UNIT_ERROR(t,
+ "Unable to allocate portdata for port 0, failing\n");
+ ret = -ENOMEM;
+ goto done;
+ }
+ memset(dd->ipath_pd[0], 0, sizeof(ipath_portdata));
+
+ pd = dd->ipath_pd[0];
+ pd->port_unit = t;
+ pd->port_port = 0;
+ pd->port_cnt = 1;
+ /* The port 0 pkey table is used by the layer interface. */
+ pd->port_pkeys[0] = IPS_DEFAULT_P_KEY;
+
+ dd->ipath_rcvtidcnt = ipath_kget_kreg32(t, kr_rcvtidcnt);
+ dd->ipath_rcvtidbase = ipath_kget_kreg32(t, kr_rcvtidbase);
+ dd->ipath_rcvegrcnt = ipath_kget_kreg32(t, kr_rcvegrcnt);
+ dd->ipath_rcvegrbase = ipath_kget_kreg32(t, kr_rcvegrbase);
+ dd->ipath_palign = ipath_kget_kreg32(t, kr_pagealign);
+ dd->ipath_piobufbase = ipath_kget_kreg32(t, kr_sendpiobufbase);
+ dd->ipath_piosize = ipath_kget_kreg32(t, kr_sendpiosize);
+ dd->ipath_ibmtu = 4096; /* default to largest legal MTU */
+ dd->ipath_piobcnt = ipath_kget_kreg32(t, kr_sendpiobufcnt);
+
+ _IPATH_VDBG
+ ("Revision %llx (PCI %x), %u ports, %u tids, %u egrtids, %u piobufs\n",
+ dd->ipath_revision, dd->ipath_pcirev, dd->ipath_portcnt,
+ dd->ipath_rcvtidcnt, dd->ipath_rcvegrcnt, dd->ipath_piobcnt);
+
+ if (((dd->ipath_revision >> INFINIPATH_R_SOFTWARE_SHIFT) & INFINIPATH_R_SOFTWARE_MASK) != IPATH_CHIP_SWVERSION) { /* >= maybe, someday */
+ _IPATH_UNIT_ERROR(t,
+ "Driver only handles version %d, chip swversion is %d (%llx), failng\n",
+ IPATH_CHIP_SWVERSION,
+ (int)(dd->
+ ipath_revision >>
+ INFINIPATH_R_SOFTWARE_SHIFT) &
+ INFINIPATH_R_SOFTWARE_MASK,
+ dd->ipath_revision);
+ ret = -ENOSYS;
+ goto done;
+ }
+ dd->ipath_majrev = (uint8_t) ((dd->ipath_revision >>
+ INFINIPATH_R_CHIPREVMAJOR_SHIFT) &
+ INFINIPATH_R_CHIPREVMAJOR_MASK);
+ dd->ipath_minrev =
+ (uint8_t) ((dd->
+ ipath_revision >> INFINIPATH_R_CHIPREVMINOR_SHIFT) &
+ INFINIPATH_R_CHIPREVMINOR_MASK);
+ dd->ipath_boardrev =
+ (uint8_t) ((dd->
+ ipath_revision >> INFINIPATH_R_BOARDID_SHIFT) &
+ INFINIPATH_R_BOARDID_MASK);
+
+ ipath_get_boardname(t, boardn, sizeof boardn);
+
+ {
+ snprintf(chip_driver_version, chip_driver_size,
+ "Driver %u.%u, %s, InfiniPath%u %u.%u, PCI %u, SW Compat %u\n",
+ IPATH_CHIP_VERS_MAJ, IPATH_CHIP_VERS_MIN, boardn,
+ (unsigned)(dd->
+ ipath_revision >> INFINIPATH_R_ARCH_SHIFT) &
+ INFINIPATH_R_ARCH_MASK, dd->ipath_majrev,
+ dd->ipath_minrev, dd->ipath_pcirev,
+ (unsigned)(dd->
+ ipath_revision >>
+ INFINIPATH_R_SOFTWARE_SHIFT) &
+ INFINIPATH_R_SOFTWARE_MASK);
+
+ }
+
+ _IPATH_DBG("%s", chip_driver_version);
+
+ /*
+ * we ignore most issues after reporting them, but have to specially
+ * handle hardware-disabled chips.
+ */
+ if(ipath_validate_rev(dd) == 2) {
+ ret = -EPERM; /* unique error, known to infinipath_init_one() */
+ goto done;
+ }
+
+ /*
+ * zero all the TID entries at startup. We do this for sanity,
+ * in case of a previous driver crash of some kind, and also
+ * because the chip powers up with these memories in an unknown
+ * state. Use portcnt, not cfgports, since this is for the full chip,
+ * not for current (possibly different) configuration value
+ * Chip Errata bug 6447
+ */
+ for (val32 = 0; val32 < dd->ipath_portcnt; val32++)
+ ipath_clear_tids(t, val32);
+
+ dd->ipath_rcvhdrentsize = IPATH_RCVHDRENTSIZE;
+ /* we could bump this
+ * to allow for full rcvegrcnt + rcvtidcnt, but then it no
+ * longer nicely fits power of two, and since we now use
+ * alloc_pages, the rest would be wasted.
+ */
+ dd->ipath_rcvhdrcnt = dd->ipath_rcvegrcnt;
+ /*
+ * setup offset of last valid entry in rcvhdrq, for various tests, to
+ * avoid calculating each time we need it
+ */
+ dd->ipath_hdrqlast =
+ dd->ipath_rcvhdrentsize * (dd->ipath_rcvhdrcnt - 1);
+ ipath_kput_kreg(t, kr_rcvhdrentsize, dd->ipath_rcvhdrentsize);
+ ipath_kput_kreg(t, kr_rcvhdrcnt, dd->ipath_rcvhdrcnt);
+ /*
+ * not in ipath_rcvhdrsize, so user programs can set differently, but
+ * so any early packets see the default size.
+ */
+ ipath_kput_kreg(t, kr_rcvhdrsize, IPATH_DFLT_RCVHDRSIZE);
+
+ /*
+ * we "know" that this works
+ * out OK. It's actually a bit more than we need, but 2048+64 isn't
+ * quite enough for full size, and we want the +N to be a power of 2
+ * to give us reasonable alignment and fit within page_alloc()'ed
+ * memory
+ */
+ dd->ipath_rcvegrbufsize = dd->ipath_piosize;
+
+ /*
+ * the min() check here is currently a nop, but it may not always be,
+ * depending on just how we do ipath_rcvegrbufsize
+ */
+ dd->ipath_ibmaxlen = min(dd->ipath_piosize, dd->ipath_rcvegrbufsize);
+ dd->ipath_init_ibmaxlen = dd->ipath_ibmaxlen;
+
+ /*
+ * set up the shadow copies of the piobufavail registers, which
+ * we compare against the chip registers for now, and the in
+ * memory DMA'ed copies of the registers. This has to be done
+ * early, before we calculate lastport, etc.
+ */
+ val = dd->ipath_piobcnt;
+ /*
+ * calc number of pioavail registers, and save it; we have 2 bits
+ * per buffer
+ */
+ dd->ipath_pioavregs =
+ round_up(val, sizeof(uint64_t) * _BITS_PER_BYTE / 2) /
+ (sizeof(uint64_t) * _BITS_PER_BYTE / 2);
+ if (dd->ipath_pioavregs >
+ (sizeof(dd->ipath_pioavailshadow) /
+ sizeof(dd->ipath_pioavailshadow[0]))) {
+ dd->ipath_pioavregs =
+ sizeof(dd->ipath_pioavailshadow) /
+ sizeof(dd->ipath_pioavailshadow[0]);
+ dd->ipath_piobcnt = dd->ipath_pioavregs * sizeof(uint64_t) * _BITS_PER_BYTE >> 1; /* 2 bits/reg */
+ _IPATH_INFO
+ ("Warning: %lld piobufs is too many to fit in shadow, only using %d\n",
+ val, dd->ipath_piobcnt);
+ }
+
+ if (!infinipath_kpiobufs) {
+ /* have to have at least one, for SMA */
+ kpiobufs = infinipath_kpiobufs = 1;
+ } else if (dd->ipath_piobcnt <
+ (dd->ipath_cfgports * IPATH_MIN_USER_PORT_BUFCNT)) {
+ _IPATH_INFO
+ ("Too few PIO buffers (%u) for %u ports to have %u each!\n",
+ dd->ipath_piobcnt, dd->ipath_cfgports,
+ IPATH_MIN_USER_PORT_BUFCNT);
+ kpiobufs = 1; /* reserve just the minimum for SMA/ether */
+ } else
+ kpiobufs = infinipath_kpiobufs;
+
+ if (kpiobufs >
+ (dd->ipath_piobcnt -
+ (dd->ipath_cfgports * IPATH_MIN_USER_PORT_BUFCNT))) {
+ i = dd->ipath_piobcnt -
+ (dd->ipath_cfgports * IPATH_MIN_USER_PORT_BUFCNT);
+ if (i < 0)
+ i = 0;
+ _IPATH_INFO
+ ("Allocating %d PIO bufs for kernel leaves too few for %d user ports (%d each); using %u\n",
+ kpiobufs, dd->ipath_cfgports - 1,
+ IPATH_MIN_USER_PORT_BUFCNT, i);
+ /*
+ * shouldn't change infinipath_kpiobufs, because could be
+ * different for different devices...
+ */
+ kpiobufs = i;
+ }
+ dd->ipath_lastport_piobuf = dd->ipath_piobcnt - kpiobufs;
+ dd->ipath_pbufsport = dd->ipath_cfgports > 1 ?
+ dd->ipath_lastport_piobuf / (dd->ipath_cfgports - 1) : 0;
+ val32 = dd->ipath_lastport_piobuf -
+ (dd->ipath_pbufsport * (dd->ipath_cfgports - 1));
+ if (val32 > 0) {
+ _IPATH_DBG
+ ("allocating %u pbufs/port leaves %u unused, add to kernel\n",
+ dd->ipath_pbufsport, val32);
+ dd->ipath_lastport_piobuf -= val32;
+ _IPATH_DBG("%u pbufs/port leaves %u unused, add to kernel\n",
+ dd->ipath_pbufsport, val32);
+ }
+ dd->ipath_lastpioindex = dd->ipath_lastport_piobuf;
+ _IPATH_VDBG
+ ("%d PIO bufs %u - %u, %u each for %u user ports\n",
+ kpiobufs, dd->ipath_lastport_piobuf, dd->ipath_piobcnt, dd->ipath_pbufsport,
+ dd->ipath_cfgports - 1);
+
+ /*
+ * this has to be page aligned, and on a page of it's own, so we
+ * can map it into user space. We also use it to give processes
+ * a copy of ipath_statusp, on a separate cacheline, followed by
+ * a copy of the freeze error string, if it's happened. Might also
+ * use that space for other things.
+ */
+ val = round_up(2 * L1_CACHE_BYTES + sizeof(*dd->ipath_statusp) +
+ dd->ipath_pioavregs * sizeof(uint64_t), 2 * PAGE_SIZE);
+ if (!(dd->ipath_pioavailregs_dma = kmalloc(val * sizeof(uint64_t),
+ GFP_KERNEL))) {
+ _IPATH_UNIT_ERROR(t,
+ "failed to allocate PIOavail reg area in memory\n");
+ ret = -ENOMEM;
+ goto done;
+ }
+ if ((PAGE_SIZE - 1) & (uint64_t) dd->ipath_pioavailregs_dma) {
+ dd->__ipath_pioavailregs_base = dd->ipath_pioavailregs_dma;
+ dd->ipath_pioavailregs_dma = (uint64_t *)
+ round_up((uint64_t) dd->ipath_pioavailregs_dma, PAGE_SIZE);
+ } else
+ dd->__ipath_pioavailregs_base = dd->ipath_pioavailregs_dma;
+ /*
+ * zero initial, since whole thing mapped
+ * into user space, and don't want info leak, or confusing garbage
+ */
+ memset((void *)dd->ipath_pioavailregs_dma, 0, PAGE_SIZE);
+
+ /*
+ * we really want L2 cache aligned, but for current CPUs of interest,
+ * they are the same.
+ */
+ dd->ipath_statusp = (uint64_t *) ((char *)dd->ipath_pioavailregs_dma +
+ ((2 * L1_CACHE_BYTES +
+ dd->ipath_pioavregs *
+ sizeof(uint64_t)) &
+ ~L1_CACHE_BYTES));
+ /* copy the current value now that it's really allocated */
+ *dd->ipath_statusp = dd->_ipath_status;
+ /*
+ * setup buffer to hold freeze msg, accessible to apps, following
+ * statusp
+ */
+ dd->ipath_freezemsg = (char *)&dd->ipath_statusp[1];
+ /* and it's length */
+ dd->ipath_freezelen = L1_CACHE_BYTES - sizeof(dd->ipath_statusp[0]);
+
+ atmp = virt_to_phys(dd->ipath_pioavailregs_dma);
+ /* stash physical address for user progs */
+ dd->ipath_pioavailregs_phys = atmp;
+ (void)ipath_kput_kreg(t, kr_sendpioavailaddr, atmp);
+ /*
+ * this is to detect s/w errors, which the h/w works around by
+ * ignoring the low 6 bits of address, if it wasn't aligned.
+ */
+ val = ipath_kget_kreg64(t, kr_sendpioavailaddr);
+ if (val != atmp) {
+ _IPATH_UNIT_ERROR(t,
+ "Catastrophic software error, SendPIOAvailAddr written as %llx, read back as %llx\n",
+ atmp, val);
+ ret = -EINVAL;
+ goto done;
+ }
+
+ if (t * 64 > (sizeof(ipath_port0_rcvhdrtail) - 64)) {
+ _IPATH_UNIT_ERROR(t,
+ "unit %u too large for port 0 rcvhdrtail buffer size\n",
+ t);
+ ret = -ENODEV;
+ }
+
+ /*
+ * kernel modules loaded into vmalloc'ed memory,
+ * verify that when we assume that, map to phys, and back to virt,
+ * that we get the right contents, so we did the mapping right.
+ */
+ vpage = vmalloc_to_page((void *)ipath_port0_rcvhdrtail);
+ if (vpage == NOPAGE_SIGBUS || vpage == NOPAGE_OOM) {
+ _IPATH_UNIT_ERROR(t, "vmalloc_to_page for rcvhdrtail fails!\n");
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ /*
+ * 64 is driven by cache line size, and also by chip requirement
+ * that low 6 bits be 0
+ */
+ val = page_to_phys(vpage) + t * 64;
+
+ /* verify that the alignment requirement was met */
+ ipath_kput_kreg_port(t, kr_rcvhdrtailaddr, 0, val);
+ atmp = ipath_kget_kreg64_port(t, kr_rcvhdrtailaddr, 0);
+ if (val != atmp) {
+ _IPATH_UNIT_ERROR(t,
+ "Catastrophic software error, RcvHdrTailAddr0 written as %llx, read back as %llx from %x\n",
+ val, atmp, kr_rcvhdrtailaddr);
+ ret = -EINVAL;
+ goto done;
+ }
+ /* so we can get current tail in ipath_kreceive(), per chip */
+ dd->ipath_hdrqtailptr =
+ &ipath_port0_rcvhdrtail[t *
+ (64 / sizeof(ipath_port0_rcvhdrtail[0]))];
+
+ ipath_kput_kreg(t, kr_rcvbthqp, IPATH_KD_QP);
+
+ /*
+ * make sure we are not in freeze, and PIO send enabled, so
+ * writes to pbc happen
+ */
+ ipath_kput_kreg(t, kr_hwerrmask, 0ULL);
+ ipath_kput_kreg(t, kr_hwerrclear, ~0ULL);
+ ipath_kput_kreg(t, kr_control, 0ULL);
+ ipath_kput_kreg(t, kr_sendctrl, INFINIPATH_S_PIOENABLE);
+
+ /*
+ * write the pbc of each buffer, to be sure it's initialized, then
+ * cancel all the buffers, and also abort any packets that might
+ * have been in flight for some reason (the latter is for driver
+ * unload/reload, but isn't a bad idea at first init).
+ * PIO send isn't enabled at this point, so there is no danger
+ * of sending these out on the wire.
+ * Chip Errata bug 6610
+ */
+ piobuf = (uint32_t *) (((char *)(dd->ipath_kregbase)) +
+ dd->ipath_piobufbase);
+ pioincr = devdata[t].ipath_palign / sizeof(*piobuf);
+ for (i = 0; i < dd->ipath_piobcnt; i++) {
+ *piobuf = 16; /* reasonable word count, just to init pbc */
+ piobuf += pioincr;
+ }
+ /* self-clearing */
+ ipath_kput_kreg(t, kr_sendctrl, INFINIPATH_S_ABORT);
+
+ /*
+ * before error clears, since we expect serdes pll errors during
+ * this, the first time after reset
+ */
+ if (ipath_bringup_link(t)) {
+ _IPATH_INFO("Failed to bringup IB link\n");
+ ret = -ENETDOWN;
+ goto done;
+ }
+
+ /*
+ * clear any "expected" hwerrs from reset and/or initialization
+ * clear any that aren't enabled (at least this once), and then
+ * set the enable mask
+ */
+ ipath_clear_init_hwerrs(t);
+ ipath_kput_kreg(t, kr_hwerrclear, ~0ULL);
+ ipath_kput_kreg(t, kr_hwerrmask, dd->ipath_hwerrmask);
+
+ dd->ipath_maskederrs = dd->ipath_ignorederrs;
+ ipath_kput_kreg(t, kr_errorclear, ~0ULL); /* clear all */
+ /* enable errors that are masked, at least this first time. */
+ ipath_kput_kreg(t, kr_errormask, ~dd->ipath_maskederrs);
+ /* clear any interrups up to this point (ints still not enabled) */
+ ipath_kput_kreg(t, kr_intclear, ~0ULL);
+
+ ipath_stats.sps_lid[t] = dd->ipath_lid;
+
+ /*
+ * allocate the shadow TID array, so we can ipath_munlock
+ * previous entries. It make make more sense to move the pageshadow
+ * to the port data structure, so we only allocate memory for ports
+ * actually in use, since we at 8k per port, now
+ */
+ dd->ipath_pageshadow = (struct page **)
+ vmalloc(dd->ipath_cfgports * dd->ipath_rcvtidcnt *
+ sizeof(struct page *));
+ if (!dd->ipath_pageshadow)
+ _IPATH_UNIT_ERROR(t,
+ "failed to allocate shadow page * array, no expected sends!\n");
+ else
+ memset(dd->ipath_pageshadow, 0,
+ dd->ipath_cfgports * dd->ipath_rcvtidcnt *
+ sizeof(struct page *));
+
+ /* set up the port 0 (kernel) rcvhdr q and egr TIDs */
+ if (!(ret = ipath_create_rcvhdrq(dd->ipath_pd[0])))
+ ret = ipath_create_port0_egr(dd->ipath_pd[0]);
+ if (ret)
+ _IPATH_UNIT_ERROR(t,
+ "failed to allocate port 0 (kernel) rcvhdrq and/or egr bufs\n");
+ else {
+ init_waitqueue_head(&ipath_sma_wait);
+ init_waitqueue_head(&ipath_sma_state_wait);
+
+ ipath_kput_kreg(pd->port_unit, kr_rcvctrl, dd->ipath_rcvctrl);
+
+ ipath_kput_kreg(t, kr_rcvbthqp, IPATH_KD_QP);
+
+ /* Enable PIO send, and update of PIOavail regs to memory. */
+ dd->ipath_sendctrl = INFINIPATH_S_PIOENABLE
+ | INFINIPATH_S_PIOBUFAVAILUPD;
+ ipath_kput_kreg(t, kr_sendctrl, dd->ipath_sendctrl);
+
+ /*
+ * enable port 0 receive, and receive interrupt
+ * other ports done as user opens and inits them
+ */
+ dd->ipath_rcvctrl = INFINIPATH_R_TAILUPD |
+ (1ULL << INFINIPATH_R_PORTENABLE_SHIFT) |
+ (1ULL << INFINIPATH_R_INTRAVAIL_SHIFT);
+ ipath_kput_kreg(t, kr_rcvctrl, dd->ipath_rcvctrl);
+
+ /*
+ * now ready for use
+ * this should be cleared whenever we detect a reset, or
+ * initiate one.
+ */
+ dd->ipath_flags |= IPATH_INITTED;
+
+ /*
+ * init our shadow copies of head from tail values, and write
+ * head values to match
+ */
+ val32 = ipath_kget_ureg32(t, ur_rcvegrindextail, 0);
+ (void)ipath_kput_ureg(t, ur_rcvegrindexhead, val32, 0);
+ dd->ipath_port0head = ipath_kget_ureg32(t, ur_rcvhdrtail, 0);
+ (void)ipath_kput_ureg(t, ur_rcvhdrhead, dd->ipath_port0head, 0);
+
+ /*
+ * by now pioavail updates to memory should have occurred,
+ * so copy them into our working/shadow registers; this is
+ * in case something went wrong with abort, but mostly to
+ * get the initial values of the generation bit correct
+ */
+ for (i = 0; i < dd->ipath_pioavregs; i++) {
+ /*
+ * Chip Errata bug 6641; even and odd qwords>3
+ * are swapped
+ */
+ if (i > 3) {
+ if (i & 1)
+ dd->ipath_pioavailshadow[i] =
+ dd->ipath_pioavailregs_dma[i - 1];
+ else
+ dd->ipath_pioavailshadow[i] =
+ dd->ipath_pioavailregs_dma[i + 1];
+ } else
+ dd->ipath_pioavailshadow[i] =
+ dd->ipath_pioavailregs_dma[i];
+ }
+ /* can get counters, stats, etc. */
+ dd->ipath_flags |= IPATH_PRESENT;
+ }
+
+ /*
+ * cause retrigger of pending interrupts ignored during init, even if
+ * we had errors
+ */
+ ipath_kput_kreg(t, kr_intclear, 0ULL);
+
+ /*
+ * set up stats retrieval timer, even if we had errors in last
+ * portion of setup
+ */
+ init_timer(&dd->ipath_stats_timer);
+ dd->ipath_stats_timer.function = ipath_get_faststats;
+ dd->ipath_stats_timer.data = (unsigned long)t;
+ /* every 5 seconds; */
+ dd->ipath_stats_timer.expires = jiffies + 5 * HZ;
+ /* takes ~16 seconds to overflow at full IB 4x bandwdith */
+ add_timer(&dd->ipath_stats_timer);
+
+ dd->ipath_stats_timer_active = 1;
+
+done:
+ if (!ret) {
+ ipath_get_guid(t);
+ *dd->ipath_statusp |= IPATH_STATUS_CHIP_PRESENT;
+ if (!ipath_sma_data_spare) {
+ /* first init, setup SMA data structs */
+ ipath_sma_data_spare =
+ ipath_sma_data_bufs[IPATH_NUM_SMAPKTS];
+ for (i = 0; i < IPATH_NUM_SMAPKTS; i++)
+ ipath_sma_data[i].buf = ipath_sma_data_bufs[i];
+ }
+ /*
+ * sps_nports is a global, so, we set it to the highest
+ * number of ports of any of the chips we find; we never
+ * decrement it, at least for now.
+ */
+ if (dd->ipath_cfgports > ipath_stats.sps_nports)
+ ipath_stats.sps_nports = dd->ipath_cfgports;
+ }
+ /* if ret is non-zero, we probably should do some cleanup here... */
+ return ret;
+}
+
+int ipath_waitfor_complete(const ipath_type t, ipath_kreg reg_id,
+ uint64_t bits_to_wait_for, uint64_t * valp)
+{
+ uint64_t timeout, lastval, val;
+
+ lastval = ipath_kget_kreg64(t, reg_id);
+ timeout = get_cycles() + 0x10000000ULL; /* <- ridiculously long time */
+ do {
+ val = ipath_kget_kreg64(t, reg_id);
+ *valp = val; /* so they have something, even on failures. */
+ if ((val & bits_to_wait_for) == bits_to_wait_for)
+ return 0;
+ if (val != lastval)
+ _IPATH_VDBG
+ ("Changed from %llx to %llx, waiting for %llx bits\n",
+ lastval, val, bits_to_wait_for);
+ yield();
+ if (get_cycles() > timeout) {
+ _IPATH_DBG
+ ("Didn't get bits %llx in register 0x%x, got %llx\n",
+ bits_to_wait_for, reg_id, *valp);
+ return ENODEV;
+ }
+ } while (1);
+}
+
+/*
+ * like ipath_waitfor_complete(), but we wait for the CMDVALID bit to go away
+ * indicating the last command has completed. It doesn't return data
+ */
+int ipath_waitfor_mdio_cmdready(const ipath_type t)
+{
+ uint64_t timeout;
+ uint64_t val;
+
+ timeout = get_cycles() + 0x10000000ULL; /* <- ridiculously long time */
+ do {
+ val = ipath_kget_kreg64(t, kr_mdio);
+ if (!(val & IPATH_MDIO_CMDVALID))
+ return 0;
+ yield();
+ if (get_cycles() > timeout) {
+ _IPATH_DBG("CMDVALID stuck in mdio reg? (%llx)\n", val);
+ return ENODEV;
+ }
+ } while (1);
+}
+
+void ipath_set_ib_lstate(const ipath_type t, int which)
+{
+ ipath_devdata *dd = &devdata[t];
+ char *what;
+
+ /*
+ * For all cases, we'll either be setting a new value of linkcmd, or
+ * we want it to be NOP, so clear it here.
+ * Similarly, we want the linkinitcmd to be NOP for everything
+ * other than explictly than explictly changing linkinitcmd,
+ * and for that case, we want to first clear any existing bits
+ */
+ dd->ipath_ibcctrl &= ~((INFINIPATH_IBCC_LINKCMD_MASK <<
+ INFINIPATH_IBCC_LINKCMD_SHIFT) |
+ (INFINIPATH_IBCC_LINKINITCMD_MASK <<
+ INFINIPATH_IBCC_LINKINITCMD_SHIFT));
+
+ if (which == INFINIPATH_IBCC_LINKCMD_INIT) {
+ dd->ipath_flags &= ~(IPATH_LINK_TOARMED | IPATH_LINK_TOACTIVE
+ | IPATH_LINK_SLEEPING);
+ /* so we can watch for a transition */
+ dd->ipath_flags |= IPATH_LINKDOWN;
+ what = "INIT";
+ } else if (which == INFINIPATH_IBCC_LINKCMD_ARMED) {
+ dd->ipath_flags |= IPATH_LINK_TOARMED;
+ dd->ipath_flags &= ~(IPATH_LINK_TOACTIVE | IPATH_LINK_SLEEPING);
+ /*
+ * this is mainly for loopback testing. If INITCMD is
+ * NOP or SLEEP, the link won't ever come up in loopback...
+ */
+ if (!
+ (dd->
+ ipath_flags & (IPATH_LINKINIT | IPATH_LINKARMED |
+ IPATH_LINKACTIVE))) {
+ _IPATH_SMADBG
+ ("going to armed, but link not yet up, set POLL\n");
+ dd->ipath_ibcctrl |=
+ INFINIPATH_IBCC_LINKINITCMD_POLL <<
+ INFINIPATH_IBCC_LINKINITCMD_SHIFT;
+ }
+ what = "ARMED";
+ } else if (which == INFINIPATH_IBCC_LINKCMD_ACTIVE) {
+ dd->ipath_flags |= IPATH_LINK_TOACTIVE;
+ dd->ipath_flags &= ~(IPATH_LINK_TOARMED | IPATH_LINK_SLEEPING);
+ what = "ACTIVE";
+ } else if (which & (INFINIPATH_IBCC_LINKINITCMD_MASK << INFINIPATH_IBCC_LINKINITCMD_SHIFT)) { /* down, disable, etc. */
+ dd->ipath_flags &= ~(IPATH_LINK_TOARMED | IPATH_LINK_TOACTIVE);
+ if (((which & INFINIPATH_IBCC_LINKINITCMD_MASK) >>
+ INFINIPATH_IBCC_LINKINITCMD_SHIFT) ==
+ INFINIPATH_IBCC_LINKINITCMD_SLEEP) {
+ dd->ipath_flags |= IPATH_LINK_SLEEPING | IPATH_LINKDOWN;
+ } else
+ dd->ipath_flags |= IPATH_LINKDOWN;
+ dd->ipath_ibcctrl |=
+ which & (INFINIPATH_IBCC_LINKINITCMD_MASK <<
+ INFINIPATH_IBCC_LINKINITCMD_SHIFT);
+ what = "DOWN";
+ } else {
+ what = "UNKNOWN";
+ _IPATH_INFO("Unknown link transition requested (which=0x%x)\n",
+ which);
+ }
+
+ dd->ipath_ibcctrl |= ((uint64_t) which & INFINIPATH_IBCC_LINKCMD_MASK)
+ << INFINIPATH_IBCC_LINKCMD_SHIFT;
+
+ _IPATH_SMADBG("Trying to move unit %u to %s, current ltstate is %s\n",
+ t, what, ipath_ibcstatus_str[(ipath_kget_kreg64(t, kr_ibcstatus)
+ >> INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT)
+ & INFINIPATH_IBCS_LINKTRAININGSTATE_MASK]);
+ ipath_kput_kreg(t, kr_ibcctrl, dd->ipath_ibcctrl);
+}
+
+static int ipath_bringup_link(const ipath_type t)
+{
+ ipath_devdata *dd = &devdata[t];
+ uint64_t val, ibc;
+ int ret = 0;
+
+ dd->ipath_control &= ~INFINIPATH_C_LINKENABLE; /* hold IBC in reset */
+ ipath_kput_kreg(t, kr_control, dd->ipath_control);
+
+ /*
+ * Note that prior to try 14 or 15 of IB, the credit scaling
+ * wasn't working, because it was swapped for writes with the
+ * 1 bit default linkstate field
+ */
+
+ /* ignore pbc and align word */
+ val = dd->ipath_piosize - 2 * sizeof(uint32_t);
+ /*
+ * for ICRC, which we only send in diag test pkt mode, and we don't
+ * need to worry about that for mtu
+ */
+ val += 1;
+ /*
+ * set the IBC maxpktlength to the size of our pio buffers
+ * the maxpktlength is in words. This is *not* the IB data MTU
+ */
+ ibc = (val / sizeof(uint32_t)) << INFINIPATH_IBCC_MAXPKTLEN_SHIFT;
+ /* in KB */
+ ibc |= 0x5ULL << INFINIPATH_IBCC_FLOWCTRLWATERMARK_SHIFT;
+ /* how often flowctrl sent
+ * more or less in usecs; balance against watermark value, so that
+ * in theory senders always get a flow control update in time to not
+ * let the IB link go idle.
+ */
+ ibc |= 0x3ULL << INFINIPATH_IBCC_FLOWCTRLPERIOD_SHIFT;
+ /* max error tolerance */
+ ibc |= 0xfULL << INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT;
+ /* use "real" buffer space for */
+ ibc |= 4ULL << INFINIPATH_IBCC_CREDITSCALE_SHIFT;
+ /* IB credit flow control. */
+ ibc |= 0xfULL << INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT;
+ /* initially come up waiting for TS1, without sending anything. */
+ dd->ipath_ibcctrl = ibc;
+ /* don't put linkinitcmd in ipath_ibcctrl, want that to stay a NOP */
+ ibc |=
+ INFINIPATH_IBCC_LINKINITCMD_SLEEP <<
+ INFINIPATH_IBCC_LINKINITCMD_SHIFT;
+ dd->ipath_flags |= IPATH_LINK_SLEEPING;
+ ipath_kput_kreg(t, kr_ibcctrl, ibc);
+
+ ret = ipath_bringup_serdes(t);
+
+ if (ret)
+ _IPATH_INFO("Could not initialize SerDes, not usable\n");
+ else {
+ dd->ipath_control |= INFINIPATH_C_LINKENABLE; /* enable IBC */
+ ipath_kput_kreg(t, kr_control, dd->ipath_control);
+ }
+
+ return ret;
+}
+
+/*
+ * called from ipath_shutdown_link(), and from sma doing a LINKDOWN
+ * Left as a separate function for historical reasons, and may want
+ * it to do more than just call ipath_set_ib_lstate() again sometime
+ * in the future.
+ */
+void ipath_down_link(const ipath_type t)
+{
+ ipath_set_ib_lstate(t, INFINIPATH_IBCC_LINKINITCMD_SLEEP <<
+ INFINIPATH_IBCC_LINKINITCMD_SHIFT);
+}
+
+/*
+ * do this when driver is being unloaded, or perhaps for diags, and
+ * maybe when we get an interrupt of a fatal link error that requires
+ * bringing the linkd down and back up
+ */
+static int ipath_shutdown_link(const ipath_type t)
+{
+ uint64_t val;
+ ipath_devdata *dd = &devdata[t];
+ int ret = 0;
+
+ _IPATH_DBG("Shutting down the link\n");
+ ipath_down_link(t);
+
+ /*
+ * we are shutting down, so tell the layered driver. We don't
+ * do this on just a link state change, much like ethernet,
+ * a cable unplug, etc. doesn't change driver state
+ */
+ if (dd->ipath_layer.l_intr)
+ dd->ipath_layer.l_intr(t, IPATH_LAYER_INT_IF_DOWN);
+
+ dd->ipath_control &= ~INFINIPATH_C_LINKENABLE; /* disable IBC */
+ ipath_kput_kreg(t, kr_control, dd->ipath_control);
+
+ *dd->ipath_statusp &= ~(IPATH_STATUS_IB_CONF | IPATH_STATUS_IB_READY);
+
+ /*
+ * clear SerdesEnable and turn the leds off; do this here because
+ * we are unloading, so don't count on interrupts to move along
+ */
+
+ ipath_quiet_serdes(t);
+ val = dd->ipath_extctrl &
+ ~(INFINIPATH_EXTC_LEDPRIPORTGREENON |
+ INFINIPATH_EXTC_LEDPRIPORTYELLOWON);
+ dd->ipath_extctrl = val;
+ ipath_kput_kreg(t, kr_extctrl, val);
+
+ if (dd->ipath_stats_timer_active) {
+ del_timer_sync(&dd->ipath_stats_timer);
+ dd->ipath_stats_timer_active = 0;
+ }
+ if (*dd->ipath_statusp & IPATH_STATUS_CHIP_PRESENT) {
+ /* can't do anything more with chip */
+ /* needs re-init */
+ *dd->ipath_statusp &= ~IPATH_STATUS_CHIP_PRESENT;
+ if (dd->ipath_kregbase) {
+ /*
+ * if we haven't already cleaned up before these
+ * are to ensure any register reads/writes "fail"
+ * until re-init
+ */
+ dd->ipath_kregbase = NULL;
+ dd->ipath_kregvirt = NULL;
+ dd->ipath_uregbase = 0ULL;
+ dd->ipath_sregbase = 0ULL;
+ dd->ipath_cregbase = 0ULL;
+ dd->ipath_kregsize = 0;
+ }
+#ifdef CONFIG_MTRR
+ if (dd->ipath_mtrr) {
+ _IPATH_VDBG("undoing WCCOMB on pio buffers\n");
+ mtrr_del(dd->ipath_mtrr, 0, 0);
+ dd->ipath_mtrr = 0;
+ }
+#endif
+ }
+
+ return ret;
+}
+
+/*
+ * when closing, free up any allocated data for a port, if the
+ * reference count goes to zero
+ * Note: this also frees the portdata itself!
+ */
+void ipath_free_pddata(ipath_devdata * dd, uint32_t port, int freehdrq)
+{
+ ipath_portdata *pd = dd->ipath_pd[port];
+
+ if (!pd)
+ return;
+ if (freehdrq)
+ /*
+ * only clear and free portdata if we are going to
+ * also release the hdrq, otherwise we leak the hdrq on each
+ * open/close cycle
+ */
+ dd->ipath_pd[port] = NULL;
+ /* cleanup locked pages private data structures */
+ ipath_mlock_cleanup(pd);
+ if (freehdrq && pd->port_rcvhdrq) {
+ int i, n = 1 << pd->port_rcvhdrq_order;
+ _IPATH_VDBG("free closed port %d rcvhdrq @ %p (order=%u)\n",
+ pd->port_port, pd->port_rcvhdrq,
+ pd->port_rcvhdrq_order);
+ for (i = 0; i < n; i++)
+ ClearPageReserved(virt_to_page
+ (pd->port_rcvhdrq + (i * PAGE_SIZE)));
+ free_pages((unsigned long)pd->port_rcvhdrq,
+ pd->port_rcvhdrq_order);
+ pd->port_rcvhdrq = NULL;
+ }
+ if (port && pd->port_rcvegrbuf_pages) { /* always free this, however */
+ void *virt;
+ unsigned e, i, n = 1 << pd->port_rcvegrbuf_order;
+ if (pd->port_rcvegrbuf_virt) {
+ for (e = 0; e < pd->port_rcvegrbuf_chunks; e++) {
+ virt = pd->port_rcvegrbuf_virt[e];
+ for (i = 0; i < n; i++)
+ ClearPageReserved(virt_to_page
+ (virt +
+ (i * PAGE_SIZE)));
+ _IPATH_VDBG
+ ("egrbuf free_pages(%p, %x), chunk %u/%u\n",
+ virt, pd->port_rcvegrbuf_order, e,
+ pd->port_rcvegrbuf_chunks);
+ free_pages((unsigned long)virt,
+ pd->port_rcvegrbuf_order);
+ }
+ vfree(pd->port_rcvegrbuf_virt);
+ pd->port_rcvegrbuf_virt = NULL;
+ }
+ pd->port_rcvegrbuf_chunks = 0;
+ _IPATH_VDBG("free closed port %d rcvegrbufs ptr array\n",
+ pd->port_port);
+ /* now the pointer array. */
+ vfree(pd->port_rcvegrbuf_pages);
+ pd->port_rcvegrbuf_pages = NULL;
+ } else if (port == 0 && dd->ipath_port0_skbs) {
+ unsigned e;
+ struct sk_buff **skbs = dd->ipath_port0_skbs;
+
+ dd->ipath_port0_skbs = NULL;
+ _IPATH_VDBG("free closed port %d ipath_port0_skbs @ %p\n",
+ pd->port_port, skbs);
+ for (e = 0; e < dd->ipath_rcvegrcnt; e++)
+ if (skbs[e])
+ dev_kfree_skb(skbs[e]);
+ vfree(skbs);
+ }
+ if (freehdrq) {
+ kfree(pd->port_tid_pg_list);
+ kfree(pd);
+ }
+}
+
+int __init infinipath_init(void)
+{
+ int r = 0, i;
+
+ _IPATH_DBG(KERN_INFO DRIVER_LOAD_MSG "%s", ipath_core_version);
+
+ ipath_init_picotime(); /* init cycles -> pico conversion */
+
+ if (!ipath_ctl_header) { /* should be always */
+ if (!(ipath_ctl_header = register_sysctl_table(ipath_ctl, 1)))
+ _IPATH_INFO("Couldn't register sysctl interface\n");
+ }
+
+ /*
+ * initialize the statusp to temporary storage so we can use it
+ * everywhere without first checking. When we "really" assign it,
+ * we copy from _ipath_status
+ */
+ for (i = 0; i < infinipath_max; i++)
+ devdata[i].ipath_statusp = &devdata[i]._ipath_status;
+
+ /*
+ * init these early, in case we take an interrupt as soon as the irq
+ * is setup. Saw a spinlock panic once that appeared to be due to that
+ * problem, when they were initted later on.
+ */
+ spin_lock_init(&ipath_pioavail_lock);
+ spin_lock_init(&ipath_sma_lock);
+
+ pci_register_driver(&infinipath_driver);
+
+ driver_create_file(&(infinipath_driver.driver), &driver_attr_version);
+
+ if ((r = register_chrdev(ipath_major, MODNAME, &ipath_fops)))
+ _IPATH_ERROR("Unable to register %s device\n", MODNAME);
+
+
+ /*
+ * never return an error, since we could have stuff registered,
+ * resources used, etc., even if no hardware found. This way we
+ * can clean up through unload.
+ */
+ return 0;
+}
+
+/*
+ * note: if for some reason the unload fails after this routine, and leaves
+ * the driver enterable by user code, we'll almost certainly crash and burn...
+ */
+static void __exit infinipath_cleanup(void)
+{
+ int r, m, port;
+
+ driver_remove_file(&(infinipath_driver.driver), &driver_attr_version);
+ if (ipath_ctl_header) {
+ unregister_sysctl_table(ipath_ctl_header);
+ ipath_ctl_header = NULL;
+ } else
+ _IPATH_DBG("No sysctl unregister, not registered OK\n");
+ if ((r = unregister_chrdev(ipath_major, MODNAME)))
+ _IPATH_DBG("unregister of device failed: %d\n", r);
+
+
+ /*
+ * turn off rcv, send, and interrupts for all ports, all drivers
+ * should also hard reset the chip here?
+ * free up port 0 (kernel) rcvhdr, egr bufs, and eventually tid bufs
+ * for all versions of the driver, if they were allocated
+ */
+ for (m = 0; m < infinipath_max; m++) {
+ uint64_t val;
+ ipath_devdata *dd = &devdata[m];
+ if (dd->ipath_kregbase) {
+ /* in case unload fails, be consistent */
+ dd->ipath_rcvctrl = 0U;
+ ipath_kput_kreg(m, kr_rcvctrl, dd->ipath_rcvctrl);
+
+ /*
+ * gracefully stop all sends allowing any in
+ * progress to trickle out first.
+ */
+ ipath_kput_kreg(m, kr_sendctrl, 0ULL);
+ val = ipath_kget_kreg64(m, kr_scratch); /* flush it */
+ /*
+ * enough for anything that's going to trickle
+ * out to have actually done so.
+ */
+ udelay(5);
+
+ /*
+ * abort any armed or launched PIO buffers that
+ * didn't go. (self clearing). Will cause any
+ * packet currently being transmitted to go out
+ * with an EBP, and may also cause a short packet
+ * error on the receiver.
+ */
+ ipath_kput_kreg(m, kr_sendctrl, INFINIPATH_S_ABORT);
+
+ /* mask interrupts, but not errors */
+ ipath_kput_kreg(m, kr_intmask, 0ULL);
+ ipath_shutdown_link(m);
+
+ /*
+ * clear all interrupts and errors. Next time
+ * driver is loaded, we know that whatever is
+ * set happened while we were unloaded
+ */
+ ipath_kput_kreg(m, kr_hwerrclear, ~0ULL);
+ ipath_kput_kreg(m, kr_errorclear, ~0ULL);
+ ipath_kput_kreg(m, kr_intclear, ~0ULL);
+ if (dd->__ipath_pioavailregs_base) {
+ kfree((void *)dd->__ipath_pioavailregs_base);
+ dd->__ipath_pioavailregs_base =
+ dd->ipath_pioavailregs_dma = 0;
+ }
+
+ if (dd->ipath_pageshadow) {
+ struct page **tmpp = dd->ipath_pageshadow;
+ int i, cnt = 0;
+
+ _IPATH_VDBG
+ ("Unlocking any expTID pages still locked\n");
+ for (port = 0; port < dd->ipath_cfgports;
+ port++) {
+ int port_tidbase =
+ port * dd->ipath_rcvtidcnt;
+ int maxtid =
+ port_tidbase + dd->ipath_rcvtidcnt;
+ for (i = port_tidbase; i < maxtid; i++) {
+ if (tmpp[i]) {
+ ipath_munlock(1,
+ &tmpp[i]);
+ tmpp[i] = 0;
+ cnt++;
+ }
+ }
+ }
+ if (cnt) {
+ ipath_stats.sps_pageunlocks += cnt;
+ _IPATH_VDBG
+ ("There were still %u expTID entries locked\n",
+ cnt);
+ }
+ if (ipath_stats.sps_pagelocks
+ || ipath_stats.sps_pageunlocks)
+ _IPATH_VDBG
+ ("%llu pages locked, %llu unlocked via ipath_m{un}lock\n",
+ ipath_stats.sps_pagelocks,
+ ipath_stats.sps_pageunlocks);
+
+ _IPATH_VDBG
+ ("Free shadow page tid array at %p\n",
+ dd->ipath_pageshadow);
+ vfree(dd->ipath_pageshadow);
+ dd->ipath_pageshadow = NULL;
+ }
+
+ /*
+ * free any resources still in use (usually just
+ * kernel ports) at unload
+ */
+ for (port = 0; port < dd->ipath_cfgports; port++)
+ ipath_free_pddata(dd, port, 1);
+ kfree(dd->ipath_pd);
+ /*
+ * debuggability, in case some cleanup path
+ * tries to use it after this
+ */
+ dd->ipath_pd = NULL;
+ }
+
+ if (dd->pcidev) {
+ if (dd->pcidev->irq) {
+ _IPATH_VDBG("unit %u free_irq of irq %x\n", m,
+ dd->pcidev->irq);
+ free_irq(dd->pcidev->irq, dd);
+ } else
+ _IPATH_DBG
+ ("irq is 0, not doing free_irq for unit %u\n",
+ m);
+ dd->pcidev = NULL;
+ }
+ if (dd->pci_registered) {
+ _IPATH_VDBG
+ ("Unregistering pci infrastructure unit %u\n", m);
+ pci_unregister_driver(&infinipath_driver);
+ dd->pci_registered = 0;
+ } else
+ _IPATH_VDBG
+ ("unit %u: no pci unreg, wasn't registered\n", m);
+ ipath_chip_cleanup(dd); /* clean up any per-chip chip-specific stuff */
+ }
+ /*
+ * clean up any chip-specific stuff for now, only one type of chip
+ * for any given driver
+ */
+ ipath_chip_done();
+
+ /* cleanup all our locked pages private data structures */
+ ipath_mlock_cleanup(NULL);
+}
+
+/* This is a generic function here, so it can return device-specific
+ * info. This allows keeping in sync with the version that supports
+ * multiple chip types.
+*/
+void ipath_get_boardname(const ipath_type t, char *name, size_t namelen)
+{
+ ipath_ht_get_boardname(t, name, namelen);
+}
+
+module_init(infinipath_init);
+module_exit(infinipath_cleanup);
+
+EXPORT_SYMBOL(infinipath_debug);
+EXPORT_SYMBOL(ipath_get_boardname);
--
0.99.9n
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
