Michal,
This is a known problem with the Yotta, I already reported it to Axus, and
they have confirmed the problem as of 2-3 months ago.
It will work with 320 LSI cards, it fails with the Adaptec cards, supposely
it fails with Adaptec cards with all but a new "windows" driver also, so one
would think that there is something in the driver doing it.
Roger
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Michal Feix
> Sent: Tuesday, December 13, 2005 2:43 AM
> To: David Lang
> Cc: Christoph Hellwig; [email protected]
> Subject: Re: [SCSI] SCSI block devices larger then 2TB
>
> >>> Current aic79xxx driver doesn't see SCSI devices larger,
> then 2TB.
> >>> It fails with READ CAPACITY(16) command. As far as I can
> understand,
> >>> we already have LBD support in kernel for some time now. So it's
> >>> only the drivers, that need to be fixed? LSI driver is
> the only one
> >>> I found working with devices over 2TB; I couldn't test any other
> >>> driver, as I don't have the hardware. Is it really so
> bad, that only
> >>> LSI chipset
> >> and
> >>> maybe few others are capable of seeng such devices?
> >>
> >>
> >> I definitly works fine with Qlogic parallel scsi and
> fibrechannel and
> >> emulex fibre channel controllers aswell as lsi/engenio megaraid
> >> controllers.
> >>
> >> It looks like aci79xx is just broken in that repsect.
> Unfortunately
> >> the driver doesn't have a proper maintainer, we scsi
> developers put
> >> in fixes and cleanups but we don't have the full
> documentation to fix
> >> such complicated issue. If you have a support contract
> with Adaptec
> >> complain to them.
> >
> > I was at a BOF at LISA last week on this subject, the guy
> running it
> > said that the common ultra320 chip used for parallel scsi doesn't
> > implment READ CAPACITY(16), but instead implemnets a
> propriatary READ
> > CAPACITY(12) which allows you to break the 2TB limit.
> >
> > I asked him to send the patch that he's been maintaining seperatly
> > (and providing to his customers, he's a storage hardware vendor) to
> > the list to get integrated.
> >
> > I'll see if I have any notes with his address on them, or you could
> > check the BOF schedule online to see if it got listed there.
>
> Looks like there's more work to be done inside aic79xx
> driver. After I gave up on making my Adaptec host adapter
> sees my 6TB SCSI array as a whole, I hit another bug. When
> the array was sliced into 3 smaller blocks which fits the 2TB
> limit, I can see the array as 3 separate SCSI blokc devices,
> but it works only with Ultra160 speed and lower. When I
> choose Ultra320 on my SCSI array, the driver starts dumping following
> errors:
>
> scsi1: Dumping Card State at program address 0x24 Mode 0x0
> Card was paused HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK)
> SEQINTSTAT[0x0] SAVED_MODE[0x11]
> DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
> SCSISIGI[0x24]:(P_DATAOUT_DT|BSYI) SCSIPHASE[0x0]
> SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE)
> SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
> SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0]
> SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0]
> PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
> LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80]:(PACKETIZED)
> LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT)
>
> SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x3
> NEXTSCB 0xff00 qinstart = 58 qinfifonext = 58
> QINFIFO:
> WAITING_TID_QUEUES:
> Pending list:
> 3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB)
> SCB_SCSIID[0x7] Total 1 Kernel Free SCB list: 2 1 0 Sequencer
> Complete DMA-inprog list:
> Sequencer Complete list:
> Sequencer DMA-Up and Complete list:
>
> scsi1: FIFO0 Free, LONGJMP == 0x8251, SCB 0x3
> SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|
> ENCFG4DATA|ENSAVEPTRS)
> SEQINTSRC[0x0] DFCNTRL[0x0]
> DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
> SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
> SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00,
> SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
> scsi1: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
> SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|
> ENCFG4DATA|ENSAVEPTRS)
> SEQINTSRC[0x0] DFCNTRL[0x0]
> DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
> SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
> SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00,
> SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
> LQIN: 0x8 0x0 0x0 0x3 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
> 0x0 0x0 0x0 0x0 0x0 0x0
> scsi1: LQISTATE = 0x1, LQOSTATE = 0x0, OPTIONMODE = 0x52
> scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
>
> SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
> CCSCBCTL[0x4]:(CCSCBDIR)
> scsi1: REG0 == 0x7960, SINDEX = 0x102, DINDEX = 0x102
> scsi1: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffdf
> CDB 0 0 0 0 0 0
> STACK: 0x13 0x0 0x0 0x0 0x0 0x0 0x0 0x0
> <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
> scsi1:0:0:2: Unable to deliver message
> aic79xx_abort returns 0x2003
> scsi1:0:0:2: Attempting to queue a TARGET RESET message:CDB:
> 0x0 0x0 0x0 0x0 0x0 0x0
> scsi1: At time of recovery, card was not paused
> >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
> scsi1: Dumping Card State at program address 0x4 Mode 0x22
> Card was paused HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK)
> SEQINTSTAT[0x0] SAVED_MODE[0x11]
> DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
> SCSISIGI[0x24]:(P_DATAOUT_DT|BSYI) SCSIPHASE[0x0]
> SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE)
> SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
> SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0]
> SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0]
> PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
> LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80]:(PACKETIZED)
> LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT)
>
> SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x3
> NEXTSCB 0xff00 qinstart = 58 qinfifonext = 58
> QINFIFO:
> WAITING_TID_QUEUES:
> Pending list:
> 3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB)
> SCB_SCSIID[0x7] Total 1 Kernel Free SCB list: 2 1 0 Sequencer
> Complete DMA-inprog list:
> Sequencer Complete list:
> Sequencer DMA-Up and Complete list:
>
> scsi1: FIFO0 Free, LONGJMP == 0x8251, SCB 0x3
> SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|
> ENCFG4DATA|ENSAVEPTRS)
> SEQINTSRC[0x0] DFCNTRL[0x0]
> DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
> SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
> SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00,
> SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
> scsi1: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
> SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|
> ENCFG4DATA|ENSAVEPTRS)
> SEQINTSRC[0x0] DFCNTRL[0x0]
> DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
> SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
> SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00,
> SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
> LQIN: 0x8 0x0 0x0 0x3 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
> 0x0 0x0 0x0 0x0 0x0 0x0
> scsi1: LQISTATE = 0x1, LQOSTATE = 0x0, OPTIONMODE = 0x52
> scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
>
> SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
> CCSCBCTL[0x4]:(CCSCBDIR)
> scsi1: REG0 == 0x3, SINDEX = 0x102, DINDEX = 0x102
> scsi1: SCBPTR == 0xff03, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
> CDB 3 1 0 0 0 0
> STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
> <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
> scsi1:0:0:2: Unable to deliver message
> aic79xx_dev_reset returns 0x2003
> scsi: Device offlined - not ready after error recovery: host
> 1 channel 0 id 0 lun 2
> scsi1 (0:2): rejecting I/O to offline device
>
> This happens randomly after booting on various slices on the array.
>
> After forcing Ultra160 as maximum speed on the SCSI array,
> driver works fine. If somebody is interested - the Array is
> Axus YI-16SAEU4 Ultra320 SCSI to SATA II RAID Subsystem. Host
> is SuperServer 5015P-8R with integrated Adaptec AIC7902
> Ultra320 SCSI adapter.
>
> --
> Michal Feix
> [email protected]
> -
> To unsubscribe from this list: send the line "unsubscribe
> linux-kernel" in the body of a message to
> [email protected] More majordomo info at
> http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
