Signed-off-by: Dmitry Pervushin <[email protected]>
Signed-off-by: Vitaly Wool <[email protected]>
Kconfig | 8
pnx4008-eeprom.c | 121 +++++++++++++
spipnx-init.h | 9
spipnx.c | 510 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
spipnx.h | 58 ++++++
5 files changed, 706 insertions(+)
Index: linux-2.6.orig/drivers/spi/Kconfig
===================================================================
--- linux-2.6.orig.orig/drivers/spi/Kconfig
+++ linux-2.6.orig/drivers/spi/Kconfig
@@ -42,5 +42,13 @@ config SPI_CHARDEV
Say Y here to use /dev/spiNN device files. They make it possible to have user-space
programs use the SPI bus.
+config SPI_PNX
+ tristate "PNX SPI bus support"
+ depends on ARCH_PNX4008 && SPI
+
+config SPI_PNX4008_EEPROM
+ tristate "Dummy EEPROM driver"
+ depends on SPI && SPI_PNX && ARCH_PNX4008
+
endmenu
Index: linux-2.6.orig/drivers/spi/pnx4008-eeprom.c
===================================================================
--- /dev/null
+++ linux-2.6.orig/drivers/spi/pnx4008-eeprom.c
@@ -0,0 +1,121 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/device.h>
+#include <linux/spi.h>
+#include <linux/proc_fs.h>
+#include <linux/ctype.h>
+
+#include "spipnx.h"
+
+#define EEPROM_SIZE 256
+#define DRIVER_NAME "EEPROM"
+#define READ_BUFF_SIZE 160
+
+static int __init spi_eeprom_init(void);
+static void __exit spi_eeprom_cleanup(void);
+
+static int spiee_read_block (struct device *d, void *block)
+{
+ struct spi_device *device = TO_SPI_DEV (d);
+ char cmd[2];
+ struct spi_msg *msg = spimsg_alloc(device,
+ SPI_M_CS|SPI_M_CSREL,
+ NULL,
+ 0,
+ NULL);
+ struct spi_msg *msg_cmd = spimsg_chain(msg, SPI_M_CS|SPI_M_WR|SPI_M_DMAUNSAFE, cmd, 2, NULL);
+ spimsg_chain(msg_cmd, SPI_M_RD|SPI_M_CSREL, block, 256, NULL);
+
+ cmd[ 0 ] = 0x03;
+ cmd[ 1 ] = 0x00;
+
+ spimsg_set_clock(msg, 2000000); /* 2 MHz */
+ spi_transfer(msg, NULL);
+ spimsg_free(msg);
+ return 256;
+}
+static ssize_t blk_show (struct device *d, struct device_attribute *attr, char *text )
+{
+ char *rdbuff = kmalloc (256, SLAB_KERNEL);
+ char line1[80],line2[80];
+ char item1[5], item2[5];
+ int bytes, i, x, blen;
+
+ blen = spiee_read_block (d, rdbuff);
+
+ bytes = 0;
+
+ strcpy(text, "");
+ for (i = 0; i < blen; i += 8) {
+ strcpy(line1, "");
+ strcpy(line2, "" );
+ for (x = i; x < i + 8; x++) {
+ if (x > blen) {
+ sprintf(item1, " ");
+ sprintf(item2, " " );
+ } else {
+ sprintf(item1, "%02x ", rdbuff[x]);
+ if (isprint(rdbuff[x])) {
+ sprintf(item2, "%c", rdbuff[x]);
+ } else {
+ sprintf(item2, ".");
+ }
+ }
+ strcat(line1, item1);
+ strcat(line2, item2);
+ }
+
+ strcat(text, line1);
+ strcat(text, "| " );
+ strcat(text, line2);
+ strcat(text, "\n" );
+
+ bytes += (strlen (line1 ) + strlen(line2) + 4);
+ }
+
+ kfree (rdbuff);
+
+ return bytes + 1;
+}
+
+static DEVICE_ATTR(blk, S_IRUGO, blk_show, NULL );
+
+
+static int spiee_probe(struct spi_device *this_dev)
+{
+ device_create_file(&this_dev->dev, &dev_attr_blk);
+ return 0;
+}
+
+static int spiee_remove(struct spi_device *this_dev)
+{
+ device_remove_file(&this_dev->dev, &dev_attr_blk);
+ return 0;
+}
+
+static struct spi_driver eeprom_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ },
+ .probe = spiee_probe,
+ .remove = spiee_remove,
+};
+
+static int __init spi_eeprom_init(void)
+{
+ return spi_driver_add(&eeprom_driver);
+}
+static void __exit spi_eeprom_cleanup(void)
+{
+ spi_driver_del(&eeprom_driver);
+}
+
+module_init(spi_eeprom_init);
+module_exit(spi_eeprom_cleanup);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("dmitry pervushin <[email protected]>");
+MODULE_DESCRIPTION("SPI EEPROM driver");
Index: linux-2.6.orig/drivers/spi/spipnx-init.h
===================================================================
--- /dev/null
+++ linux-2.6.orig/drivers/spi/spipnx-init.h
@@ -0,0 +1,9 @@
+#include <linux/kernel.h>
+#include <asm/arch/spi.h>
+
+#ifdef CONFIG_ARCH_PNX4008
+struct spipnx_wifi_params spipnx_wifi_params = {
+ .gpio_cs_line = GPIO_03,
+};
+#endif
+
Index: linux-2.6.orig/drivers/spi/spipnx.c
===================================================================
--- /dev/null
+++ linux-2.6.orig/drivers/spi/spipnx.c
@@ -0,0 +1,510 @@
+/*
+ * drivers/spi/spi-pnx.c
+ *
+ * SPI support for PNX 010x/4008 boards.
+ *
+ * Author: dmitry pervushin <[email protected]>
+ * Based on Dennis Kovalev's <[email protected]> bus driver for pnx010x
+ *
+ * 2004 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/platform.h>
+#include <linux/spi.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/miscdevice.h>
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/dma.h>
+#include <asm/dma-mapping.h>
+#include <asm/hardware/clock.h>
+
+#include "spipnx.h"
+#include "spipnx-init.h"
+
+#define lock_device( dev ) /* down( &dev->sem ); */
+#define unlock_device( dev ) /* up( &dev->sem ); */
+
+#define spipnx_dump_xchg(xxx...) pr_debug( xxx )
+
+
+static int spipnx_spi_init(struct device *bus_device);
+static int spipnx_xfer(struct spi_msg *msg);
+static int spipnx_probe(struct device *bus_device);
+static int spipnx_remove(struct device *bus_device);
+static int spipnx_suspend(struct device *bus_device, pm_message_t);
+static int spipnx_resume(struct device *bus_device);
+static void spipnx_control(struct spi_device *device, int code, u32 ctl);
+static int spipnx_request_hardware(struct spipnx_driver_data *dd,
+ struct platform_device *dev);
+static void spipnx_free_hardware(struct spipnx_driver_data *dd,
+ struct platform_device *dev);
+static void spipnx_set_clock(struct device *bus_device, u32 clock);
+static void spipnx_reset (struct device *bus_device, u32 context);
+static void *spipnx_alloc(void *buf, size_t len, int dir);
+static void spipnx_free(void *buf, void *safe, size_t len, int dir);
+
+
+static struct spi_bus_driver spipnx_driver = {
+ .driver = {
+ .bus = &platform_bus_type,
+ .name = "spipnx",
+ .probe = spipnx_probe,
+ .remove = spipnx_remove,
+ .suspend = spipnx_suspend,
+ .resume = spipnx_resume,
+ },
+ .xfer = spipnx_xfer,
+ .set_clock = spipnx_set_clock,
+ .reset = spipnx_reset,
+ .dma_safe_alloc = spipnx_alloc,
+ .dma_safe_free = spipnx_free,
+};
+
+static void *spipnx_alloc(void *buf, size_t len, int dir)
+{
+ void *safe = kmalloc(len, SLAB_KERNEL);
+
+ if (safe && (dir & SPI_M_WR))
+ memcpy(safe, buf, len);
+
+ return safe;
+}
+
+static void spipnx_free(void *buf, void *safe, size_t len, int dir)
+{
+ if (dir & SPI_M_RD)
+ memcpy(buf, safe, len);
+ kfree(safe);
+}
+
+void spipnx_set_mode(struct device *bus_device, int mode)
+{
+ struct spipnx_driver_data *dd = dev_get_drvdata(bus_device);
+
+ lock_device(bus_device);
+ dd->dma_mode = mode;
+ unlock_device(bus_device);
+}
+
+static void spipnx_set_clock(struct device *bus_device, u32 clock)
+{
+ struct spipnx_driver_data *dd = dev_get_drvdata(bus_device);
+
+ dd->saved_clock = clock;
+ dev_dbg (bus_device, "setting clock speed to %d\n", dd->saved_clock );
+}
+
+static void spipnx_reset (struct device *bus_device, u32 context )
+{
+ struct spipnx_driver_data *dd = dev_get_drvdata(bus_device);
+
+ dd->spi_regs->con = context;
+ dev_dbg (bus_device, "CON set to 0x%08X\n", context );
+}
+
+static int spipnx_probe(struct device *device)
+{
+ struct spipnx_driver_data *dd;
+ int err;
+
+ dd = kzalloc(sizeof(struct spipnx_driver_data), GFP_KERNEL);
+ if (!dd) {
+ err = -ENOMEM;
+ goto probe_fail_1;
+ }
+ /*
+ * these special values are needed because 0 is the valid
+ * assignment to IRQ# and DMA channel as well as DMA slave#
+ */
+ dd->dma_channel = -1;
+ dd->slave_nr = -1;
+ dd->irq = NO_IRQ;
+
+ err = spipnx_request_hardware(dd, to_platform_device(device));
+ if (err)
+ goto probe_fail_2;
+
+ spi_bus_driver_init(&spipnx_driver, device);
+
+ dd->state = SPIPNX_STATE_READY;
+
+ dev_set_drvdata(device, dd);
+
+ spipnx_arch_add_devices( device, to_platform_device(device)->id );
+
+ return 0;
+
+probe_fail_2:
+ spipnx_remove(device);
+probe_fail_1:
+ return err;
+}
+
+int spipnx_remove(struct device *device)
+{
+ struct spipnx_driver_data *dd = dev_get_drvdata(device);
+
+ spi_bus_driver_cleanup(TO_SPI_BUS_DRIVER(device->driver), device);
+ spipnx_free_hardware(dd, to_platform_device(device));
+ kfree(dd);
+ return 0;
+}
+
+static void spipnx_free_hardware(struct spipnx_driver_data *dd,
+ struct platform_device *dev)
+{
+ lock_device(&dev->dev);
+
+ spipnx_clk_stop(dd->clk);
+
+ if (dd->io_flags & IORESOURCE_IRQ) {
+ free_irq(dd->irq, dev->dev.bus_id);
+ dd->io_flags &= ~IORESOURCE_IRQ;
+ }
+ if (dd->io_flags & IORESOURCE_MEM) {
+ /*
+ release_mem_region((unsigned long)dd->iostart,
+ dd->ioend - dd->iostart + 1);
+ */
+ dd->io_flags &= ~IORESOURCE_MEM;
+ }
+ if (dd->io_flags & IORESOURCE_DMA) {
+ spipnx_release_dma(&dd->dma_channel);
+ dd->io_flags &= ~IORESOURCE_DMA;
+ }
+
+ spipnx_clk_free(dd->clk);
+
+#ifdef DEBUG
+ if (dd->io_flags)
+ printk(KERN_ERR
+ "Oops, dd_ioflags for driver data %p is still 0x%x!\n",
+ dd, dd->io_flags);
+#endif
+ unlock_device(&dev->dev);
+}
+
+void spipnx_dma_handler (int channel, int cause, void* context, struct pt_regs* pt_regs )
+{
+#ifdef CONFIG_ARCH_PNX4008
+ struct spipnx_driver_data *dd = context;
+
+ if (cause & DMA_TC_INT )
+ complete( &dd->threshold );
+#endif
+}
+
+int spipnx_request_hardware(struct spipnx_driver_data *dd,
+ struct platform_device *dev)
+{
+ int err = 0;
+ struct resource *rsrc;
+
+ lock_device(&dev->dev);
+ rsrc = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (rsrc) {
+ dd->iostart = rsrc->start;
+ dd->ioend = rsrc->end;
+ dd->spi_regs = ioremap(dd->iostart, SZ_4K);
+ /*
+ if (!request_mem_region
+ (dd->iostart, dd->ioend - dd->iostart + 1, dev->dev.bus_id))
+ err = -ENODEV;
+ else
+ */
+ dd->io_flags |= IORESOURCE_MEM;
+ }
+ dd->clk = spipnx_clk_init(dev);
+ if (IS_ERR(dd->clk)) {
+ err = PTR_ERR(dd->clk);
+ goto out;
+ }
+
+ spipnx_clk_start(dd->clk);
+
+ dd->irq = platform_get_irq(dev, 0);
+ if (dd->irq != NO_IRQ) {
+ dd->spi_regs->ier = 0;
+ dd->spi_regs->stat = 0;
+ }
+
+ rsrc = platform_get_resource(dev, IORESOURCE_DMA, 0);
+ if (rsrc) {
+ dd->slave_nr = rsrc->start;
+ err = spipnx_request_dma(&dd->dma_channel, dev->dev.bus_id, spipnx_dma_handler, dd);
+ if (!err)
+ dd->io_flags |= IORESOURCE_DMA;
+ }
+out:
+ unlock_device(&dev.dev);
+ return err;
+}
+
+int __init spipnx_init(void)
+{
+ printk("PNX/SPI bus driver\n");
+ return spi_bus_driver_register(&spipnx_driver);
+}
+
+void __exit spipnx_cleanup(void)
+{
+ spi_bus_driver_unregister(&spipnx_driver);
+}
+
+static int spipnx_spi_init(struct device *bus_device)
+{
+ struct spipnx_driver_data *dd = dev_get_drvdata(bus_device);
+ int timeout;
+ u32 config;
+
+ config = dd->spi_regs->con;
+
+ dd->spi_regs->global = SPIPNX_GLOBAL_RESET_SPI | SPIPNX_GLOBAL_SPI_ON;
+ udelay(10);
+ dd->spi_regs->global = SPIPNX_GLOBAL_SPI_ON;
+ for (timeout = 10000; timeout >= 0; --timeout)
+ if (dd->spi_regs->global & SPIPNX_GLOBAL_SPI_ON)
+ break;
+ if (timeout <= 0)
+ return -1;
+
+ config |= (7<<9);
+ config &= ~(SPIPNX_CON_RXTX);
+ dd->spi_regs->con = config;
+ spipnx_arch_init(dd->saved_clock / 1000, dd->spi_regs);
+ dd->spi_regs->stat |= 0x100;
+ return 0;
+}
+
+void spipnx_control(struct spi_device *device, int type, u32 ctl)
+{
+ spipnx_arch_control(device, type, ctl);
+}
+
+static inline int
+spipnx_xfer_buggy (struct spi_msg *msg)
+{
+ u8* dat;
+ void *buf;
+ int len;
+ struct spi_msg *pmsg;
+ struct spi_device *spidev;
+ struct device *dev;
+ struct spipnx_driver_data *dd;
+ vhblas_spiregs* regs;
+ int i, rc = 0;
+ u32 stat, fc;
+ struct spipnx_dma_transfer_t params;
+ u32 flags = 0;
+
+ if (!msg) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ spidev = spimsg_get_spidev(msg);
+ dev = &spidev->dev;
+ dd = dev_get_drvdata(dev->parent);
+ regs = dd->spi_regs;
+
+ for (pmsg = msg; pmsg; pmsg = spimsg_getnext(pmsg)) {
+ flags = spimsg_get_flags(pmsg);
+ len = spimsg_get_buffer(pmsg, &buf);
+ dat = buf;
+
+ spipnx_control(spidev, MESSAGE_START, flags & SPI_M_CS);
+ if (flags & SPI_M_WR) {
+ regs->con |= SPIPNX_CON_RXTX;
+ regs->ier |= SPIPNX_IER_EOT;
+ regs->con &= ~SPIPNX_CON_SHIFT_OFF;
+ regs->frm = len;
+
+ if (dd->dma_mode && len >= FIFO_CHUNK_SIZE) {
+ params.dma_buffer = dma_map_single(dev->parent, dat, len, DMA_TO_DEVICE);
+ params.saved_ll = NULL;
+ params.saved_ll_dma = 0;
+
+ spipnx_setup_dma(dd->iostart, dd->slave_nr, dd->dma_channel,
+ DMA_MODE_WRITE, dat, len);
+ init_completion (&dd->threshold);
+ spipnx_start_dma(dd->dma_channel);
+ wait_for_completion (&dd->threshold);
+ spipnx_stop_dma(dd->dma_channel, dat);
+ dma_unmap_single(dev->parent, params.dma_buffer, len, DMA_TO_DEVICE);
+ } else {
+ regs->con &= ~SPIPNX_CON_SHIFT_OFF;
+ for (i = 0; i < len ; i ++ ) {
+ while (regs->stat & 0x04)
+ continue;
+ regs->dat = *dat;
+ dat ++;
+ }
+ }
+
+ while ((regs->stat & SPIPNX_STAT_EOT) == 0)
+ continue;
+ }
+
+ if (flags & SPI_M_RD) {
+ int stopped;
+ u8 c;
+
+ regs->con &= ~SPIPNX_CON_RXTX;
+ regs->ier |= SPIPNX_IER_EOT;
+ regs->con &= ~SPIPNX_CON_SHIFT_OFF;
+ regs->frm = len;
+
+ regs->dat = 0; /* kick off read */
+
+ if (dd->dma_mode && len > FIFO_CHUNK_SIZE - 1) {
+ params.dma_buffer = dma_map_single(dev->parent, dat, len - (FIFO_CHUNK_SIZE - 1), DMA_FROM_DEVICE);
+ params.saved_ll = NULL;
+ params.saved_ll_dma = 0;
+
+ spipnx_setup_dma(dd->iostart, dd->slave_nr, dd->dma_channel,
+ DMA_MODE_READ, dat, len - (FIFO_CHUNK_SIZE - 1));
+ init_completion (&dd->threshold);
+ spipnx_start_dma(dd->dma_channel);
+ wait_for_completion (&dd->threshold);
+ spipnx_stop_dma(dd->dma_channel, dat);
+ dma_unmap_single(dev->parent, params.dma_buffer, len - (FIFO_CHUNK_SIZE - 1), DMA_FROM_DEVICE);
+ dat = dat + len - (FIFO_CHUNK_SIZE - 1);
+ len = FIFO_CHUNK_SIZE - 1;
+ }
+
+ stopped = 0;
+ stat = 0;
+ for(i = 0; i < len; ) {
+ unsigned long irq_flags;
+ local_irq_save(irq_flags);
+
+ stat = dd->spi_regs->stat;;
+ fc = dd->spi_regs->frm;
+ /* has hardware finished ? */
+ if(fc == 0) {
+ regs->con |= SPIPNX_CON_SHIFT_OFF;
+ stopped = 1;
+ }
+ /* FIFO not empty and hardware not about to finish */
+ if((!(stat & SPI_STAT_SPI_BE)) && ((fc > 4) || (stopped ))) {
+ *dat++= c = dd->spi_regs->dat;
+ i++;
+ }
+ if((stat & SPI_STAT_SPI_BF) && (!stopped)) {
+ *dat++= c = dd->spi_regs->dat;
+ i++;
+ }
+ local_irq_restore(irq_flags);
+ }
+ }
+ regs->stat |= SPIPNX_STAT_CLRINT;
+ spipnx_control(spidev, MESSAGE_END, flags & SPI_M_CSREL);
+ spimsg_put_buffer(pmsg, buf);
+ }
+out:
+ return rc;
+}
+
+static inline char *spimsg_flags_str(unsigned flags)
+{
+ static char s[4] = "";
+
+ s[0] = 0;
+ if (flags & SPI_M_RD)
+ strcat(s, "R");
+ if (flags & SPI_M_WR)
+ strcat(s, "W");
+ if (flags & ~(SPI_M_WR | SPI_M_RD))
+ strcat(s, "*");
+ return s;
+}
+
+int spipnx_xfer(struct spi_msg *msg)
+{
+ struct spi_device *dev = spimsg_get_spidev(msg);
+ struct spipnx_driver_data *dd = dev_get_drvdata(dev->dev.parent);
+ int status;
+
+ lock_device(dev->parent);
+ if (!SPIPNX_IS_READY(dd)) {
+ status = -EIO;
+ goto unlock_and_out;
+ }
+
+ dev_dbg(&dev->dev, " message (%s)\n",
+ spimsg_flags_str(spimsg_get_flags(msg)));
+
+ if (spipnx_spi_init(dev->dev.parent) < 0) {
+ dev_dbg(&dev->dev, "spi_init failed, skipping the transfer\n");
+ status = -EFAULT;
+ goto unlock_and_out;
+ }
+
+ dd->progress = 1;
+ status = spipnx_xfer_buggy(msg);
+ dd->progress = 0;
+unlock_and_out:
+ unlock_device(dev->parent);
+ return status;
+}
+
+static int spipnx_suspend(struct device *dev, pm_message_t level)
+{
+ int err = 0;
+#ifdef CONFIG_PM
+ struct spipnx_driver_data *dd = dev_get_drvdata(dev);
+
+ lock_device(dev);
+ spipnx_release_dma(&dd->dma_channel); /* any sanity checks, eg using DMA,
+ will be done here */
+ spipnx_clk_stop(dd->clk);
+ dev->power.power_state = level;
+ unlock_device(dev);
+#endif
+ return err;
+}
+
+static int spipnx_resume(struct device *dev)
+{
+ int err = 0;
+#ifdef CONFIG_PM
+ struct spipnx_driver_data *dd = dev_get_drvdata(dev);
+
+ lock_device(dev);
+ spipnx_clk_start(dd->clk);
+ if (dd->slave_nr >= 0)
+ spipnx_request_dma(&dd->dma_channel, dev->bus_id, spipnx_dma_handler, dd);
+ dev->power.power_state = PMSG_ON;
+ unlock_device(dev);
+#endif /* CONFIG_PM */
+ return err;
+}
+
+EXPORT_SYMBOL(spipnx_set_mode);
+MODULE_AUTHOR("dmitry pervushin <[email protected]>");
+MODULE_DESCRIPTION("SPI driver for Philips' PNX boards");
+MODULE_LICENSE("GPL");
+module_init(spipnx_init);
+module_exit(spipnx_cleanup);
Index: linux-2.6.orig/drivers/spi/spipnx.h
===================================================================
--- /dev/null
+++ linux-2.6.orig/drivers/spi/spipnx.h
@@ -0,0 +1,58 @@
+/*
+ * SPI support for pnx010x.
+ *
+ * Author: Dennis Kovalev <[email protected]>
+ *
+ * 2004 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef _SPI_PNX_BUS_DRIVER
+#define _SPI_PNX_BUS_DRIVER
+
+#include <asm/arch/platform.h>
+#include <asm/arch/dma.h>
+#include <asm/dma.h>
+#include <asm/arch/spi.h>
+
+/* structures */
+struct spipnx_driver_data {
+ unsigned io_flags;
+
+ int irq;
+
+ int dma_mode;
+ int dma_channel;
+ int slave_nr;
+
+ u32 iostart, ioend;
+ vhblas_spiregs *spi_regs;
+
+ struct clk *clk;
+ int clk_id[4];
+
+ int state;
+ u32 saved_clock;
+
+ struct completion op_complete;
+ struct completion threshold;
+
+ int progress;
+
+ void (*control) (struct spi_device * dev, int code, u32 ctl);
+};
+
+#define SPIPNX_STATE_UNINITIALIZED 0
+#define SPIPNX_STATE_READY 1
+#define SPIPNX_STATE_SUSPENDED 2
+
+#define SPIPNX_IS_READY( bus ) ( (bus)->state == SPIPNX_STATE_READY )
+
+#define FIFO_CHUNK_SIZE 56
+
+#define SPI_ENDIAN_SWAP_NO 0
+#define SPI_ENDIAN_SWAP_YES 1
+
+#endif // __SPI_PNX_BUS_DRIVER
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
