sata_uli fails to see harddisks on an ASRock 939Dual-SATA2 board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On an ASRock 939Dual-SATA2 board, the sata_uli driver recognizes the onboard 
SATA controller (PCI ID 10b9:5289 rev 10, Subsystem 1849:5289), but fails to 
see an attached harddisk (the BIOS identifies the harddisk correctly, so a 
hardware failure is unlikely). sata_uli apparently sees _something_ is 
attached, but doesn't get further. dmesg says:

libata version 1.20 loaded.
sata_uli 0000:00:12.1: version 0.5
GSI 18 sharing vector 0xD1 and IRQ 18
ACPI: PCI Interrupt 0000:00:12.1[A] -> GSI 19 (level, low) -> IRQ 209
ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE082 bmdma 0xD880 irq 209
ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xDC02 bmdma 0xD888 irq 209
ata1: SATA link up 1.5 Gbps (SStatus 113)
scsi0 : sata_uli
ata2: SATA link down (SStatus 0)
scsi1 : sata_uli

No disks are found, even though the link (on ata1) is detected.

Verified both with an x86 and an x86_64 kernel, and both 2.6.15-rc5 and 
2.6.15-rc5-mm2.

Any ideas?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux