Hallo!
You could try:
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
It's possible that you have chosen "power_save".
You can see possible settings in
sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors
Try "performance"!
Then you should get your 1,4 GHz.
But be aware, that this is not powersaving!
Maybe you can play around with it.
A good possibility is to install an userspace application for governing
the cpu-speed lik cpufreqd
Dirk
Am Mittwoch, den 14.12.2005, 11:57 +0100 schrieb Sander:
> Willy Tarreau wrote (ao):
> > On Tue, Dec 13, 2005 at 08:47:58PM -0500, Caroline GAUDREAU wrote:
> > > my cpu is 1400MHz, but why there's cpu MHz : 598.593
> > >
> > > caro@olymphe:~$ cat /proc/cpuinfo
> > > processor : 0
> > > vendor_id : GenuineIntel
> > > cpu family : 6
> > > model : 9
> > > model name : Intel(R) Pentium(R) M processor 1400MHz
> > > stepping : 5
> > > cpu MHz : 598.593
> > > cache size : 1024 KB
> >
> > It's probably a notebook that you started unplugged from the mains
> > power. Mine is stupid enough to believe that I *want* to save power if
> > I plug the mains *after* powering it up ! And there's no way to force
> > it to switch from 600 to nominal freq afterwards ! So I have to
> > connect it to the mains first.
>
> If you say this based on 'cat /proc/cpuinfo' output: isn't it true that
> /proc/cpuinfo is static, and doesn't necessarily reflect the actual
> speed of the processor?
>
--
Dirk Henning Gerdes
Bönnersdyk 47
47803 Krefeld
Tel: 02151-755745
0174-7776640
Mail: [email protected]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
