Add a hook so architectures can validate /dev/mem mmap requests.
This is analogous to validation we already perform in the read/write
paths.
The identity mapping scheme used on ia64 requires that each 16MB or
64MB granule be accessed with exactly one attribute (write-back or
uncacheable). This avoids "attribute aliasing", which can cause a
machine check.
Sample problem scenario:
- Machine supports VGA, so it has uncacheable (UC) MMIO at 640K-768K
- efi_memmap_init() discards any write-back (WB) memory in the first granule
- Application (e.g., "hwinfo") mmaps /dev/mem, offset 0
- hwinfo receives UC mapping (the default, since memmap says "no WB here")
- Machine check abort (on chipsets that don't support UC access to WB
memory, e.g., sx1000)
In the scenario above, the only choices are
- Use WB for hwinfo mmap. Can't do this because it causes attribute
aliasing with the UC mapping for the VGA MMIO space.
- Use UC for hwinfo mmap. Can't do this because the chipset may not
support UC for that region.
- Disallow the hwinfo mmap with -EINVAL. That's what this patch does.
Tony, can you ack/nak this please? It touches both ia64 and generic
code.
Signed-off-by: Bjorn Helgaas <[email protected]>
arch/ia64/kernel/efi.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
drivers/char/mem.c | 14 ++++++++++++--
include/asm-ia64/io.h | 1 +
3 files changed, 57 insertions(+), 2 deletions(-)
Index: work5/arch/ia64/kernel/efi.c
===================================================================
--- work5.orig/arch/ia64/kernel/efi.c 2005-12-09 16:17:50.000000000 -0700
+++ work5/arch/ia64/kernel/efi.c 2005-12-09 16:28:58.000000000 -0700
@@ -636,6 +636,10 @@
}
EXPORT_SYMBOL(efi_mem_attributes);
+/*
+ * We only allow /dev/mem read & write system calls to write-back memory,
+ * because read & write don't allow the user to control access size.
+ */
int
valid_phys_addr_range (unsigned long phys_addr, unsigned long *size)
{
@@ -662,6 +666,46 @@
return 0;
}
+/*
+ * Anything in the EFI memory map can be accessed via /dev/mem mmap.
+ * This may have to be extended eventually for memory hot-plug.
+ */
+int
+valid_mmap_phys_addr_range (unsigned long phys_addr, unsigned long *size)
+{
+ void *efi_map_start, *efi_map_end, *p;
+ efi_memory_desc_t *md;
+ u64 efi_desc_size;
+ int mmio_found = 0;
+
+ efi_map_start = __va(ia64_boot_param->efi_memmap);
+ efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size;
+ efi_desc_size = ia64_boot_param->efi_memdesc_size;
+
+ for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) {
+ md = p;
+
+ if (md->type == EFI_MEMORY_MAPPED_IO)
+ mmio_found = 1;
+
+ if (phys_addr - md->phys_addr < (md->num_pages << EFI_PAGE_SHIFT)) {
+ if (*size > md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) - phys_addr)
+ *size = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) - phys_addr;
+ return 1;
+ }
+ }
+
+ /*
+ * Some firmware doesn't report MMIO regions in the EFI memory map.
+ * The Intel BigSur (a.k.a. HP i2000) has this problem. In this
+ * case, we can't rely on the map to validate mmap requests.
+ */
+ if (!mmio_found)
+ return 1;
+
+ return 0;
+}
+
int __init
efi_uart_console_only(void)
{
Index: work5/drivers/char/mem.c
===================================================================
--- work5.orig/drivers/char/mem.c 2005-12-09 16:24:07.000000000 -0700
+++ work5/drivers/char/mem.c 2005-12-09 16:33:10.000000000 -0700
@@ -101,6 +101,11 @@
return 1;
}
+
+static inline int valid_mmap_phys_addr_range(unsigned long addr, size_t *size)
+{
+ return 1;
+}
#endif
/*
@@ -244,15 +249,20 @@
static int mmap_mem(struct file * file, struct vm_area_struct * vma)
{
+ size_t size = vma->vm_end - vma->vm_start;
+
+ if (!valid_mmap_phys_addr_range(vma->vm_pgoff << PAGE_SHIFT, &size))
+ return -EINVAL;
+
vma->vm_page_prot = phys_mem_access_prot(file, vma->vm_pgoff,
- vma->vm_end - vma->vm_start,
+ size,
vma->vm_page_prot);
/* Remap-pfn-range will mark the range VM_IO and VM_RESERVED */
if (remap_pfn_range(vma,
vma->vm_start,
vma->vm_pgoff,
- vma->vm_end-vma->vm_start,
+ size,
vma->vm_page_prot))
return -EAGAIN;
return 0;
Index: work5/include/asm-ia64/io.h
===================================================================
--- work5.orig/include/asm-ia64/io.h 2005-12-09 16:17:50.000000000 -0700
+++ work5/include/asm-ia64/io.h 2005-12-09 16:28:58.000000000 -0700
@@ -89,6 +89,7 @@
#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
extern int valid_phys_addr_range (unsigned long addr, size_t *count); /* efi.c */
+extern int valid_mmap_phys_addr_range (unsigned long addr, size_t *count);
/*
* The following two macros are deprecated and scheduled for removal.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]