RE: PROBLEM: bug in e1000 module causes very high CPU load

["ph0x" <ph0x@freequest.net>]

>please send the output of cat /proc/interrupts, I'm worried you have
>an issue due to interrupt sharing.  If it does fail again and is still
>usable, please send the output of ethtool -d eth0, and ethtool -S
>eth0. Also, is there any chance you can try the 6.2.15 driver from
>http://prdownloads.sf.net/e1000

ph0x@orion:~$ cat /proc/interrupts
           CPU0
  0:  113068493          XT-PIC  timer
  2:          0          XT-PIC  cascade
  8:          1          XT-PIC  rtc
  9:          0          XT-PIC  acpi
 10:   25386110          XT-PIC  eth1
 11:   29562097          XT-PIC  eth0
 12:     527004          XT-PIC  uhci_hcd:usb1, uhci_hcd:usb2
 14:     565520          XT-PIC  ide0
 15:       1887          XT-PIC  ide1
NMI:          0
LOC:          0
ERR:          0
MIS:          0

The problem is that the card has never been rendered unusable, it just
starts to have performance issues.
I've compiled the new driver and installed it. I'll schedule a reboot later
this week to get it working.
I've also built 2.6.14.3, which was activeted by a reboot this Saturday.
I'll let you know if the new driver worked.

>do you have a test to reproduce this?

Yes, let the server act as usual, it just starts happening out of the blue.
No new hardware has been added or removed, no new programs has been
installed.
Only thing upgrades was the kernel.

>Thanks, Jesse

Thanks,
Andreas

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/