Matthew Garrett wrote:
On Fri, Dec 09, 2005 at 06:58:41AM -0500, Jeff Garzik wrote:
If this is for hotswap, as I noted, libata doesn't need this at all.
If the hardware supports it, then libata will support it directly.
There is no ACPI-specific magic, because ACPI does nothing but talk to
the same hardware libata is talking to.
If libata knows how to talk to the random hardware attached to a Dell
laptop hotswap bay, I'll be amazed. Ejecting the drive generates a
system management interrupt, which then causes the ACPI code to check a
register in a block of machine-specific registers and generate an ACPI
notification. As far as I can tell, the controller has no say in the
matter at all - the Intel specs seem to suggest that ICH6 doesn't
generate a hotswap interrupt unless you're using AHCI (which this
hardware doesn't).
libata will immediately notice the ejection without ACPI's help.
Jeff
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]