Re: Gene's pcHDTV 3000 analog problem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



	After checking the datasheets of Thompson tuner, and I have one guess:

	At board description, tda9887 is not there. This tuner needs to work
properly.

	This small patch does enable it for your board.

	You should notice that you may need to use some parameters for tda0887
to work properly, like using port1=0 port2=0 qss=0 as insmod options for
this module. (these are some on/off bits at the chip, to enable some
special functions - if 0/0/0 doesn't work you may need to test 0/0/1, ..
1/1/1).

Cheers, 
Mauro.
Index: linux/drivers/media/video/cx88/cx88-cards.c
===================================================================
RCS file: /cvs/video4linux/v4l-dvb/linux/drivers/media/video/cx88/cx88-cards.c,v
retrieving revision 1.108
diff -u -p -r1.108 cx88-cards.c
--- linux/drivers/media/video/cx88/cx88-cards.c	25 Nov 2005 10:24:13 -0000	1.108
+++ linux/drivers/media/video/cx88/cx88-cards.c	1 Dec 2005 20:56:43 -0000
@@ -569,6 +569,7 @@ struct cx88_board cx88_boards[] = {
 		.radio_type     = UNSET,
 		.tuner_addr	= ADDR_UNSET,
 		.radio_addr	= ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
 		.input          = {{
 			.type   = CX88_VMUX_TELEVISION,
 			.vmux   = 0,

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux