Michael Krufky wrote:
Gene Heskett wrote:
Got it, building src tree now, config'd & building.
And, I unchecked everything but what I need to run this card (I think,
whatdoIknow) and got this at depmod time:
WARNING:
/lib/modules/2.6.15-rc2-git4/kernel/drivers/media/video/cx88/cx88-dvb.ko
needs unknown symbol mt352_attach
WARNING:
/lib/modules/2.6.15-rc2-git4/kernel/drivers/media/video/cx88/cx88-dvb.ko
needs unknown symbol nxt200x_attach
WARNING:
/lib/modules/2.6.15-rc2-git4/kernel/drivers/media/video/cx88/cx88-dvb.ko
needs unknown symbol mt352_write
WARNING:
/lib/modules/2.6.15-rc2-git4/kernel/drivers/media/video/cx88/cx88-dvb.ko
needs unknown symbol lgdt330x_attach
WARNING:
/lib/modules/2.6.15-rc2-git4/kernel/drivers/media/video/cx88/cx88-dvb.ko
needs unknown symbol cx22702_attach
Maybe somebody can take the time to tell me what I do need to run a
pcHDTV-3000 in both ntsc and atsc modes using this newer code?
I was under the impression I needed the cx88 stuffs, ORV51132 (for
atsc) and nxt2002(for ntsc), but now we have lots of other dependencies
out the wazoo. Please clarify.
These other dependencies have always been there, except that nxt200x
and lgdt330x are relatively new frontends.
The difference is that a new Kconfig / Makefile feature is allowing us
to only select the specific frontend needed by your hardware...
Previously, all frontend support was forced to be built-in.
You and Adrian have clearly demonstrated that this frontend selection
capability isn't working properly. I think I will send Linus a patch
to restore previous functionality, forcing all frontends to be
built... Then I will resubmit a patch to Andrew that will re-enable
this frontend selection support, and I'll ask him to hold it in -mm
until we can work out the bugs.
Actually, I think that I might have fixed it... Please test the attached
patch.
The problem is that you are selecting cx88-dvb to be built-in to the
kernel (not as a module) , but the frontends are being built as
modules only.
[PATCH] hybrid v4l/dvb advanced frontend selection fix
Signed-off-by: Michael Krufky <[email protected]>
diff -upr linux-2.6.15-rc2-git4/drivers/media/video/cx88/Kconfig linux/drivers/media/video/cx88/Kconfig
--- linux-2.6.15-rc2-git4/drivers/media/video/cx88/Kconfig 2005-11-24 13:47:02.148734660 -0500
+++ linux/drivers/media/video/cx88/Kconfig 2005-11-24 13:50:29.849190791 -0500
@@ -46,8 +46,8 @@ config VIDEO_CX88_DVB_ALL_FRONTENDS
If you are unsure, choose Y.
config VIDEO_CX88_DVB_MT352
- tristate "Zarlink MT352 DVB-T Support"
- default m
+ bool "Zarlink MT352 DVB-T Support"
+ default y
depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS
select DVB_MT352
---help---
@@ -55,8 +55,8 @@ config VIDEO_CX88_DVB_MT352
Connexant 2388x chip and the MT352 demodulator.
config VIDEO_CX88_DVB_OR51132
- tristate "OR51132 ATSC Support"
- default m
+ bool "OR51132 ATSC Support"
+ default y
depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS
select DVB_OR51132
---help---
@@ -64,8 +64,8 @@ config VIDEO_CX88_DVB_OR51132
Connexant 2388x chip and the OR51132 demodulator.
config VIDEO_CX88_DVB_CX22702
- tristate "Conexant CX22702 DVB-T Support"
- default m
+ bool "Conexant CX22702 DVB-T Support"
+ default y
depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS
select DVB_CX22702
---help---
@@ -73,8 +73,8 @@ config VIDEO_CX88_DVB_CX22702
Connexant 2388x chip and the CX22702 demodulator.
config VIDEO_CX88_DVB_LGDT330X
- tristate "LG Electronics DT3302/DT3303 ATSC Support"
- default m
+ bool "LG Electronics DT3302/DT3303 ATSC Support"
+ default y
depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS
select DVB_LGDT330X
---help---
@@ -82,8 +82,8 @@ config VIDEO_CX88_DVB_LGDT330X
Connexant 2388x chip and the LGDT3302/LGDT3303 demodulator.
config VIDEO_CX88_DVB_NXT200X
- tristate "NXT2002/NXT2004 ATSC Support"
- default m
+ bool "NXT2002/NXT2004 ATSC Support"
+ default y
depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS
select DVB_NXT200X
---help---
diff -upr linux-2.6.15-rc2-git4/drivers/media/video/Kconfig linux/drivers/media/video/Kconfig
--- linux-2.6.15-rc2-git4/drivers/media/video/Kconfig 2005-11-24 13:47:02.123743990 -0500
+++ linux/drivers/media/video/Kconfig 2005-11-24 13:52:00.525339321 -0500
@@ -26,7 +26,7 @@ config VIDEO_BT848
module will be called bttv.
config VIDEO_BT848_DVB
- tristate "DVB/ATSC Support for bt878 based TV cards"
+ bool "DVB/ATSC Support for bt878 based TV cards"
depends on VIDEO_BT848 && DVB_CORE
select DVB_BT8XX
---help---
diff -upr linux-2.6.15-rc2-git4/drivers/media/video/saa7134/Kconfig linux/drivers/media/video/saa7134/Kconfig
--- linux-2.6.15-rc2-git4/drivers/media/video/saa7134/Kconfig 2005-11-24 13:47:02.185720851 -0500
+++ linux/drivers/media/video/saa7134/Kconfig 2005-11-24 13:51:24.175908125 -0500
@@ -42,8 +42,8 @@ config VIDEO_SAA7134_DVB_ALL_FRONTENDS
If you are unsure, choose Y.
config VIDEO_SAA7134_DVB_MT352
- tristate "Zarlink MT352 DVB-T Support"
- default m
+ bool "Zarlink MT352 DVB-T Support"
+ default y
depends on VIDEO_SAA7134_DVB && !VIDEO_SAA7134_DVB_ALL_FRONTENDS
select DVB_MT352
---help---
@@ -51,8 +51,8 @@ config VIDEO_SAA7134_DVB_MT352
Philips saa7134 chip and the MT352 demodulator.
config VIDEO_SAA7134_DVB_TDA1004X
- tristate "Phillips TDA10045H/TDA10046H DVB-T Support"
- default m
+ bool "Phillips TDA10045H/TDA10046H DVB-T Support"
+ default y
depends on VIDEO_SAA7134_DVB && !VIDEO_SAA7134_DVB_ALL_FRONTENDS
select DVB_TDA1004X
---help---
@@ -60,8 +60,8 @@ config VIDEO_SAA7134_DVB_TDA1004X
Philips saa7134 chip and the TDA10045H/TDA10046H demodulator.
config VIDEO_SAA7134_DVB_NXT200X
- tristate "NXT2002/NXT2004 ATSC Support"
- default m
+ bool "NXT2002/NXT2004 ATSC Support"
+ default y
depends on VIDEO_SAA7134_DVB && !VIDEO_SAA7134_DVB_ALL_FRONTENDS
select DVB_NXT200X
---help---
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]