On Wed, Nov 23, 2005 at 04:39:35PM +0100, Pierre Ossman wrote:
> Russell King wrote:
> >On Wed, Nov 23, 2005 at 04:20:00PM +0100, Pierre Ossman wrote:
> >
> >>But if no hardware is connected to those devices, then where does the
> >>driver route the setserial stuff?
> >>
> >
> >setserial /dev/ttyS2 port 0x200 irq 5 autoconfig
> >
> >and you might then end up with another serial port detected. If
> >/dev/ttyS2 and above do not exist, you can't do that. That would
> >in turn effectively prevent folk with some serial cards using them
> >with Linux without editing and rebuilding their kernel.
>
> Ah. But why is this not done through module parameters? That would be
> more consistent with how you specify resources for other drivers.
Take a moment to consider how you would supply a large number of ports
via this method - eg, 16 ports, where a port IO and IRQ configuration
takes about 10 characters ("0x1234,11"), and then what about the baud
base, probe flags (auto_irq, skip_test) ?
Also consider that ttyS0 might be your serial console for your headless
box, so you're unable to build 8250 as a module in the first place.
It really isn't simple. Serial _is_ special - and that is why it keeps
sprouting new and wonderful initialisation paths. I'd rather not add
yet another gods greatest invention initialisation path on top of those
we already have.
> >As for the rest of the "setserial stuff" it gets recorded against
> >the port and remembered for when the hardware turns up, which it
> >may do if it's your PCMCIA modem card.
>
> This could be a bit more questionable. Setting the initial state of
> hardware is better done (IMHO) by reacting to some hotplug event. E.g.
> fedora uses an 'install' line in modprobe.conf to restore mixer state
> for sound cards.
Actually, my example was slightly flawed - when the hardware turns up
it gets reset back to something sane. So the settings are merely
remembered while the hardware doesn't exist.
--
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of: 2.6 Serial core
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
