On Fri, 18 Nov 2005, Jeff Garzik wrote:
Yes, for both 50xx and 60xx, I had to turn off MSI in order to get
sata_mv to work...
With MSI and libata DEBUG turned off I had a crash - solid one, SysRQ
doesn't work. I have forgotten to set console to serial port when
booting this kernel, so what follows is what I had on the screen,
hopefully without any typos (and without the initial addresses):
do_IRQ+0x4e/0x86
=====================
common_interrupt+0x1a/0x20
__do_softirq+0x5e/0xdc
do_sortirq+0x4b/0x4f
=====================
apic_timer_interrupt+0x1c/0x24
scsi_request_fn+0x221/0x369 [scsi_mod]
blk_run_queue+0x28/0x37
scsi_next_command+0x26/0x30 [scsi_mod]
scsi_end_request+0x83/0xb0 [scsi_mod]
scsi_io_completion+0x151/0x4d7 [scsi_mod]
sd_rw_intr+0xc9/0x3b4 [sd_mod]
apic_timer_interrupt+0x1c/0x24
scsi_finish_command+0x82/0xd0 [scsi_mod]
scsi_error_handler+0x0/0x124 [scsi_mod]
ata_scsi_qc_complete+0x64/0x77 [libata]
ata_qc_complete+0x32/0xaa [libata]
mv_eng_timeout+0x8b/0x9e [sata_mv]
ata_scsi_error+0xf/0x23 [libata]
scsi_error_handler+0xbc/0x124 [scsi_mod]
kthread+0x93/0x97
kthread+0x0/0x97
kernel+thread_helper+0x5/0xb
This was a SMP kernel running on an Intel PIV with HyperThreading and
with 2 disks attached to the controller. I'll try to get this crash
again with serial console...
--
Bogdan Costescu
IWR - Interdisziplinaeres Zentrum fuer Wissenschaftliches Rechnen
Universitaet Heidelberg, INF 368, D-69120 Heidelberg, GERMANY
Telephone: +49 6221 54 8869, Telefax: +49 6221 54 8868
E-mail: [email protected]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
