Re: [PATCH 1/3] cciss: bug fix for hpacucli

[Jens Axboe <axboe@suse.de>]

On Fri, Nov 18 2005, Jens Axboe wrote:
> On Fri, Nov 18 2005, mikem wrote:
> > Patch 1 of 3
> > 
> > This patch fixes a bug that breaks hpacucli, a command line interface
> > for the HP Array Config Utility. Without this fix the utility will
> > not detect any controllers in the system. I thought I had already fixed
> > this, but I guess not.
> > 
> > Thanks to all who reported the issue. Please consider this this inclusion.
> 
> Lovely, hope this makes it able to configure my drives on the tiger now
> :).

This sort-of makes it work. I get some complaints about unaligned access
when setting up a test array:

=> controller slot=0 create type=logicaldrive drives=all raid=1 drivetype=sas
.hpacucli(12458): unaligned access to 0x60000fffffcb370e, ip=0x40000000003c8550
=> controller slot=0 create type=logicaldrive drives=all raid=1 drivetype=sata
.hpacucli(12458): unaligned access to 0x60000fffffcb4aee, ip=0x40000000003c8550
.hpacucli(12458): unaligned access to 0x60000fffffcb370e, ip=0x40000000003c8550
.hpacucli(12458): unaligned access to 0x60000fffffcb370e, ip=0x40000000003c8550

Invoking hpacucli again later on makes it trigger a kobj warning:

Badness in kref_get at lib/kref.c:32

Call Trace:
 [<a000000100013560>] show_stack+0x80/0xa0
                                sp=e0000001f5547b20 bsp=e0000001f5541250
 [<a000000100013e30>] dump_stack+0x30/0x60
                                sp=e0000001f5547cf0 bsp=e0000001f5541238
 [<a00000010034fec0>] kref_get+0xa0/0xc0
                                sp=e0000001f5547cf0 bsp=e0000001f5541218
 [<a00000010034e470>] kobject_get+0x30/0x60
                                sp=e0000001f5547cf0 bsp=e0000001f55411f0
 [<a00000010034eb80>] kobject_add+0x20/0x380
                                sp=e0000001f5547cf0 bsp=e0000001f55411b8
 [<a0000001001b7ff0>] register_disk+0x70/0x200
                                sp=e0000001f5547cf0 bsp=e0000001f5541188
 [<a0000001003385d0>] add_disk+0x90/0xc0
                                sp=e0000001f5547cf0 bsp=e0000001f5541168
 [<a000000202e1aa40>] rebuild_lun_table+0xaa0/0xb20 [cciss]
                                sp=e0000001f5547cf0 bsp=e0000001f55410a8
 [<a000000202e1bbc0>] cciss_ioctl+0xa20/0x3be0 [cciss]
                                sp=e0000001f5547d00 bsp=e0000001f5540fc0
 [<a0000001003346b0>] blkdev_driver_ioctl+0xd0/0x160
                                sp=e0000001f5547e10 bsp=e0000001f5540f78
 [<a000000100335050>] blkdev_ioctl+0x170/0xb40
                                sp=e0000001f5547e10 bsp=e0000001f5540f20
 [<a000000100147cc0>] block_ioctl+0x40/0x60
                                sp=e0000001f5547e10 bsp=e0000001f5540ef0
 [<a000000100160740>] do_ioctl+0x160/0x1a0
                                sp=e0000001f5547e10 bsp=e0000001f5540eb0
 [<a000000100160880>] vfs_ioctl+0x100/0x8e0
                                sp=e0000001f5547e10 bsp=e0000001f5540e68
 [<a0000001001610c0>] sys_ioctl+0x60/0xc0
                                sp=e0000001f5547e20 bsp=e0000001f5540de8
 [<a00000010000bc80>] ia64_ret_from_syscall+0x0/0x20
                                sp=e0000001f5547e30 bsp=e0000001f5540de8
 [<a000000000010640>] __kernel_syscall_via_break+0x0/0x20
                                sp=e0000001f5548000 bsp=e0000001f5540de8

-- 
Jens Axboe

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/