From: Greg Kroah-Hartman <[email protected]>
It was causing too many problems, and this is not the proper type of
driver for this device.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/Kconfig | 9 --
drivers/usb/serial/Makefile | 1
drivers/usb/serial/nokia_dku2.c | 142 ----------------------------------------
3 files changed, 152 deletions(-)
--- usb-2.6.orig/drivers/usb/serial/Kconfig
+++ usb-2.6/drivers/usb/serial/Kconfig
@@ -394,15 +394,6 @@ config USB_SERIAL_MCT_U232
To compile this driver as a module, choose M here: the
module will be called mct_u232.
-config USB_SERIAL_NOKIA_DKU2
- tristate "USB Nokia DKU2 Driver"
- depends on USB_SERIAL
- help
- Say Y here if you want to use a Nokia DKU2 device.
-
- To compile this driver as a module, choose M here: the
- module will be called nokia_dku2.
-
config USB_SERIAL_PL2303
tristate "USB Prolific 2303 Single Port Serial Driver"
depends on USB_SERIAL
--- usb-2.6.orig/drivers/usb/serial/Makefile
+++ usb-2.6/drivers/usb/serial/Makefile
@@ -31,7 +31,6 @@ obj-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) +=
obj-$(CONFIG_USB_SERIAL_KLSI) += kl5kusb105.o
obj-$(CONFIG_USB_SERIAL_KOBIL_SCT) += kobil_sct.o
obj-$(CONFIG_USB_SERIAL_MCT_U232) += mct_u232.o
-obj-$(CONFIG_USB_SERIAL_NOKIA_DKU2) += nokia_dku2.o
obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o
obj-$(CONFIG_USB_SERIAL_OPTION) += option.o
obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o
--- usb-2.6.orig/drivers/usb/serial/nokia_dku2.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * Nokia DKU2 USB driver
- *
- * Copyright (C) 2004
- * Author: C Kemp
- *
- * This program is largely derived from work by the linux-usb group
- * and associated source files. Please see the usb/serial files for
- * individual credits and copyrights.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * 20.09.2005 - Matthias Blaesing <[email protected]>
- * Added short name to device structure to make driver load into kernel 2.6.13
- *
- * 20.09.2005 - Matthias Blaesing <[email protected]>
- * Added usb_deregister to exit code - to allow remove and reinsert of module
- */
-
-
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/tty.h>
-#include <linux/tty_driver.h>
-#include <linux/tty_flip.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-#include "usb-serial.h"
-
-
-#define NOKIA_VENDOR_ID 0x0421
-#define NOKIA7600_PRODUCT_ID 0x0400
-#define NOKIA6230_PRODUCT_ID 0x040f
-#define NOKIA6170_PRODUCT_ID 0x0416
-#define NOKIA6670_PRODUCT_ID 0x041d
-#define NOKIA6680_PRODUCT_ID 0x041e
-#define NOKIA6230i_PRODUCT_ID 0x0428
-
-#define NOKIA_AT_PORT 0x82
-#define NOKIA_FBUS_PORT 0x86
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v0.2"
-#define DRIVER_AUTHOR "C Kemp"
-#define DRIVER_DESC "Nokia DKU2 Driver"
-
-static struct usb_device_id id_table [] = {
- { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA7600_PRODUCT_ID) },
- { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6230_PRODUCT_ID) },
- { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6170_PRODUCT_ID) },
- { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6670_PRODUCT_ID) },
- { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6680_PRODUCT_ID) },
- { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6230i_PRODUCT_ID) },
- { } /* Terminating entry */
-};
-MODULE_DEVICE_TABLE(usb, id_table);
-
-/* The only thing which makes this device different from a generic
- * device is that we have to set an alternative configuration to make
- * the relevant endpoints available. In 2.6 this is really easy... */
-static int nokia_probe(struct usb_serial *serial,
- const struct usb_device_id *id)
-{
- int retval = -ENODEV;
-
- if (serial->interface->altsetting[0].endpoint[0].desc.bEndpointAddress == NOKIA_AT_PORT) {
- /* the AT port */
- dev_info(&serial->dev->dev, "Nokia AT Port:\n");
- retval = 0;
- } else if (serial->interface->num_altsetting == 2 &&
- serial->interface->altsetting[1].endpoint[0].desc.bEndpointAddress == NOKIA_FBUS_PORT) {
- /* the FBUS port */
- dev_info(&serial->dev->dev, "Nokia FBUS Port:\n");
- usb_set_interface(serial->dev, 10, 1);
- retval = 0;
- }
-
- return retval;
-}
-
-static struct usb_driver nokia_driver = {
- .owner = THIS_MODULE,
- .name = "nokia_dku2",
- .probe = usb_serial_probe,
- .disconnect = usb_serial_disconnect,
- .id_table = id_table,
-};
-
-static struct usb_serial_driver nokia_serial_driver = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "nokia_dku2",
- },
- .description = "Nokia 7600/6230(i)/6170/66x0 DKU2 driver",
- .id_table = id_table,
- .num_interrupt_in = 1,
- .num_bulk_in = 1,
- .num_bulk_out = 1,
- .num_ports = 1,
- .probe = nokia_probe,
-};
-
-static int __init nokia_init(void)
-{
- int retval;
-
- retval = usb_serial_register(&nokia_serial_driver);
- if (retval)
- return retval;
-
- retval = usb_register(&nokia_driver);
- if (retval) {
- usb_serial_deregister(&nokia_serial_driver);
- return retval;
- }
-
- info(DRIVER_VERSION " " DRIVER_AUTHOR);
- info(DRIVER_DESC);
-
- return retval;
-}
-
-static void __exit nokia_exit(void)
-{
- usb_deregister(&nokia_driver);
- usb_serial_deregister(&nokia_serial_driver);
-}
-
-module_init(nokia_init);
-module_exit(nokia_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]