sharpsl_pm: using milivolts instead of custom units?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi!

It seems to me that sharpsl.c is using some very custom units:

#define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
#define SHARPSL_CHARGE_ON_TEMP         0xe0  /* 2.9V */
#define SHARPSL_CHARGE_ON_ACIN_HIGH   0x9b  /* 6V */
#define SHARPSL_CHARGE_ON_ACIN_LOW    0x34  /* 2V */
#define SHARPSL_FATAL_ACIN_VOLT        182   /* 3.45V */
#define SHARPSL_FATAL_NOACIN_VOLT      170   /* 3.40V */

...what are they? Unfortunately collie uses very different units:

#ifdef CONFIG_SA1100_COLLIE
struct battery_thresh spitz_battery_levels_noac[] = {
        { 368, 100},
        { 358,  25},
        { 356,   5},
        {   0,   0},
...

...so it could get very confusing. Would it be feasible to convert to
mV as soon as possible and have all constants in milivolts? I realize
they may be slightly different for different models, but they should
at least be comparable.
								Pavel
-- 
Thanks, Sharp!
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux