On 8 Nov 2005, at 3:15, Alan Cox wrote:
On Llu, 2005-11-07 at 17:32 +0000, Chris Boot wrote:Hi all, Since I've only got a DVD drive on good ol' PATA, I thought I'd try Alan's latest VIA PATA driver for libata, to see where I got. Well, the machine simply doesn't boot, preferring to get stuck after detecting the drive. I've tried with and without libata.atapi_enabled=1 and get the same result in both cases. Here's my log with some SysRq output that might be useful:Thanks for giving it a try. Can you also give me an lspci -v for reference
Relevant parts of lspci:0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge Subsystem: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge
Flags: bus master, 66Mhz, medium devsel, latency 8 Memory at e0000000 (32-bit, prefetchable) [size=64M] Capabilities: [80] AGP version 3.5 Capabilities: [c0] Power Management version 20000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: e4000000-e6ffffff Prefetchable memory behind bridge: d0000000-dfffffff Capabilities: [80] Power Management version 2 [...]0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) Subsystem: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller
Flags: bus master, medium devsel, latency 32, IRQ 169 I/O ports at b800 [size=8] I/O ports at bc00 [size=4] I/O ports at c000 [size=8] I/O ports at c400 [size=4] I/O ports at c800 [size=16] I/O ports at cc00 [size=256] Capabilities: [c0] Power Management version 20000:00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/ VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/ VT8233/A/C/VT8235 PIPC Bus Master IDE
Flags: bus master, medium devsel, latency 32, IRQ 169 I/O ports at d000 [size=16] Capabilities: [c0] Power Management version 2 [...]
[4294672.373000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -GSI 20 (level, low) -> IRQ 177[4294672.411000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 1Thats suspicious in itself. I take it the VIA drivers/ide driver works fine and reports IRQ 1 however ?
[4294669.230000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [4294669.263000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294669.298000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1[4294669.331000] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 11, using IRQ 20
[4294669.366000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20[4294669.399000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] - > GSI 20 (level, low) -> IRQ 169
[4294669.436000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 9 [4294669.469000] VP_IDE: chipset revision 6 [4294669.500000] VP_IDE: not 100% native mode: will probe irqs later[4294669.534000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 [4294669.570000] ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio [4294669.606000] ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:pio, hdd:pio
[4294669.642000] Probing IDE interface ide0...[4294669.688000] input: AT Translated Set 2 keyboard as /class/input/ input0 [4294669.725000] atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly. [4294669.944000] input: AT Translated Set 2 keyboard as /class/input/ input1
[4294670.490000] hda: PHILIPS PBDV1640P, ATAPI CD/DVD-ROM drive [4294671.137000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [4294671.171000] Probing IDE interface ide1... [4294671.690000] Probing IDE interface ide1...[4294672.210000] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[4294672.247000] Uniform CD-ROM driver Revision: 3.20
[4294672.446000] ata5: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xD000 irq 14
HTH, Chris -- Chris Boot [email protected] http://www.bootc.net/
Attachment:
smime.p7s
Description: S/MIME cryptographic signature
- Follow-Ups:
- Re: 2.6.14-mm1 libata pata_via
- From: Chris Boot <[email protected]>
- Re: 2.6.14-mm1 libata pata_via
- References:
- 2.6.14-mm1 libata pata_via
- From: Chris Boot <[email protected]>
- Re: 2.6.14-mm1 libata pata_via
- From: Alan Cox <[email protected]>
- 2.6.14-mm1 libata pata_via
- Prev by Date: Re: keep in sync with -mm tree?
- Next by Date: Re: [PATCH] [MMC] wbsd pnp suspend
- Previous by thread: Re: 2.6.14-mm1 libata pata_via
- Next by thread: Re: 2.6.14-mm1 libata pata_via
- Index(es):