[patch] sharpsl MTD NAND driver support for akita/borzoi

[Richard Purdie <rpurdie@rpsys.net>]

The Sharp Zaurus akita and borzoi models are large page flash devices. 
This patch adds support for them to the sharpsl MTD NAND driver but
keeps the oob layout and bad block positions compatible with the Sharp
Zaurus 2.4 kernel and ROM bootloader.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>

Index: linux-2.6.13/drivers/mtd/nand/sharpsl.c
===================================================================
--- linux-2.6.13.orig/drivers/mtd/nand/sharpsl.c	2005-10-27 11:08:46.000000000 +0000
+++ linux-2.6.13/drivers/mtd/nand/sharpsl.c	2005-10-27 11:12:58.000000000 +0000
@@ -115,6 +115,23 @@
 	.pattern = scan_ff_pattern
 };
 
+static struct nand_bbt_descr sharpsl_akita_bbt = {
+	.options = 0,
+	.offs = 4,
+	.len = 1,
+	.pattern = scan_ff_pattern
+};
+
+static struct nand_oobinfo akita_oobinfo = {
+	.useecc = MTD_NANDECC_AUTOPLACE,
+	.eccbytes = 24,
+	.eccpos = {
+		0x5,  0x1,  0x2,  0x3,  0x6,  0x7,  0x15, 0x11, 
+		0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23, 
+		0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37},
+	.oobfree = { {0x08, 0x09} }
+};
+
 static int
 sharpsl_nand_dev_ready(struct mtd_info* mtd)
 {
@@ -194,10 +211,14 @@
 	this->chip_delay = 15;
 	/* set eccmode using hardware ECC */
 	this->eccmode = NAND_ECC_HW3_256;
+	this->badblock_pattern = &sharpsl_bbt;	
+	if (machine_is_akita() || machine_is_borzoi()) {
+		this->badblock_pattern = &sharpsl_akita_bbt;
+		this->autooob = &akita_oobinfo;
+	}
 	this->enable_hwecc = sharpsl_nand_enable_hwecc;
 	this->calculate_ecc = sharpsl_nand_calculate_ecc;
 	this->correct_data = nand_correct_data;
-	this->badblock_pattern = &sharpsl_bbt;
 
 	/* Scan to find existence of the device */
 	err=nand_scan(sharpsl_mtd,1);
@@ -230,7 +251,7 @@
 		}
 	}
 
-	if (machine_is_husky() || machine_is_borzoi()) {
+	if (machine_is_husky() || machine_is_borzoi() || machine_is_akita()) {
 		/* Need to use small eraseblock size for backward compatibility */
 		sharpsl_mtd->flags |= MTD_NO_VIRTBLOCKS;
 	}




-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/