Re: linus's git tree: ohci_hcd 0000:00:13.1: Unlink after no-IRQ? Controller is probably using the wrong IRQ

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

> I'm following linus's git tree, rebuilding it every day with a 
> cron job, and installing it after reviewing the diff.
> I'm using hp dx5150, which is a x86_64 machine, 
> with ATI chipsets
> 
> 
> I've noticed that on Linus's git tree 2 Nov 2005, 
> Linux doesn't boot on my system with the final message 
> being the following (hand-copied):
> 
> ohci_hcd 0000:00:13.1: Unlink after no-IRQ? Controller is probably using the wrong IRQ
> 
> 
> d83c671fb7023f69a9582e622d01525054f23b66 the version failed 
> 6e9d6b8ee4e0c37d3952256e6472c57490d6780d the last known good version

df70b17f88a4d1d8545d3569a1f6d28c6004f9e4 now works.

Maybe it was too early in the morning.
Linus' git tree as of now works as expected, and boots.

$dmesg
Bootdata ok (command line is root=/dev/sda1 ro )
Linux version 2.6.14dancer-gdf70b17f (dancer@dancer64) (gcc version 4.0.2 (Debian 4.0.2-2)) #1 Wed Nov 2 06:04:52 JST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003bef0000 (usable)
 BIOS-e820: 000000003bef0000 - 000000003bef3000 (ACPI NVS)
 BIOS-e820: 000000003bef3000 - 000000003bf00000 (ACPI data)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
ACPI: RSDP (v000 HP                                    ) @ 0x00000000000f8600
ACPI: RSDT (v001 HP     AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003bef3040
ACPI: FADT (v002 HP     AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003bef30c0
ACPI: ASF! (v016 HP     AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003bef64c0
ACPI: MCFG (v001 HP     AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003bef6580
ACPI: MADT (v001 HP     AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003bef6400
ACPI: DSDT (v001 HP     AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
On node 0 totalpages: 245391
  DMA zone: 3999 pages, LIFO batch:2
  Normal zone: 241392 pages, LIFO batch:64
  HighMem zone: 0 pages, LIFO batch:2
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:15 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 3bf00000:a4100000)
Checking aperture...
CPU 0: aperture @ 6426000000 size 32 MB
Aperture from northbridge cpu 0 too small (32 MB)
No AGP bridge found
Built 1 zonelists
Kernel command line: root=/dev/sda1 ro 
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 3.579545 MHz PM timer.
time.c: Detected 2193.686 MHz processor.
time.c: Using PIT/TSC based timekeeping.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Memory: 961776k/981952k available (2528k kernel code, 19316k reserved, 1084k data, 164k init)
Calibrating delay using timer specific routine.. 4393.37 BogoMIPS (lpj=2196685)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
mtrr: v2.0 (20020519)
CPU: AMD Athlon(tm) 64 Processor 3500+ stepping 00
Using local APIC timer interrupts.
Detected 12.464 MHz APIC timer.
testing NMI watchdog ... OK.
softlockup thread 0 started up.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
PCI: Using MMCONFIG at e0000000
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
Boot video device is 0000:01:05.0
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 6 7 10 11), disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 10 11)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0800
pnp: ACPI device : hid PNP0C04
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0700
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0401
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C01
pnp: PnP ACPI: found 11 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Cannot allocate resource region 3 of device 0000:00:00.0
PCI: Cannot allocate resource region 0 of device 0000:02:00.0
PCI-DMA: Disabling IOMMU.
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:00' and the driver 'system'
pnp: 00:00: ioport range 0x228-0x22f has been reserved
pnp: 00:00: ioport range 0x40b-0x40b has been reserved
pnp: 00:00: ioport range 0x4d6-0x4d6 has been reserved
pnp: 00:00: ioport range 0xc00-0xc01 has been reserved
pnp: 00:00: ioport range 0xc14-0xc14 has been reserved
pnp: 00:00: ioport range 0xc50-0xc52 has been reserved
pnp: 00:00: ioport range 0xc6c-0xc6d has been reserved
pnp: 00:00: ioport range 0xc6f-0xc6f has been reserved
pnp: match found with the PnP device '00:05' and the driver 'system'
pnp: match found with the PnP device '00:09' and the driver 'system'
pnp: match found with the PnP device '00:0a' and the driver 'system'
PCI: Bridge: 0000:00:01.0
  IO window: c000-cfff
  MEM window: fda00000-fdafffff
  PREFETCH window: c8000000-d7ffffff
PCI: Bridge: 0000:00:05.0
  IO window: d000-dfff
  MEM window: fde00000-fdefffff
  PREFETCH window: fdb00000-fdbfffff
PCI: Bridge: 0000:00:14.4
  IO window: b000-bfff
  MEM window: fdd00000-fddfffff
  PREFETCH window: fdc00000-fdcfffff
PCI: Setting latency timer of device 0000:00:05.0 to 64
IA-32 Microcode Update Driver: v1.14 <[email protected]>
IA32 emulation $Id: dmesg,v 1.10 2005/11/01 21:23:55 dancer Exp $
audit: initializing netlink socket (disabled)
audit(1130912509.236:1): initialized
Initializing Cryptographic API
PCI: Setting latency timer of device 0000:00:05.0 to 64
pcie_portdrv_probe->Dev[5a37:1002] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie01]
usbmon: debugfs is not available
ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 16
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 16, io mem 0xfe02c000
ehci_hcd 0000:00:13.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 16, io mem 0xfe02d000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb 3-2: new full speed USB device using ohci_hcd and address 2
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 4 ports detected
usbcore: registered new driver hiddev
usb 3-2.3: new full speed USB device using ohci_hcd and address 3
hub 3-2.3:1.0: USB hub found
hub 3-2.3:1.0: 3 ports detected
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
usbcore: registered new driver asix
usb 3-2.3.1: new full speed USB device using ohci_hcd and address 4
input: Chicony  PFU-65 USB Keyboard as /class/input/input0
input: USB HID v1.00 Keyboard [Chicony  PFU-65 USB Keyboard] on usb-0000:00:13.1-2.3.1
usb 3-2.3.3: new low speed USB device using ohci_hcd and address 5
input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input1
input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.1-2.3.3
usbcore: registered new driver cdc_ether
usbcore: registered new driver net1080
usbcore: registered new driver zaurus
Linux agpgart interface v0.101 (c) Dave Jones
[drm] Initialized drm 1.0.0 20040925
pnp: the driver 'i8042 kbd' has been registered
pnp: the driver 'i8042 aux' has been registered
pnp: the driver 'i8042 kbd' has been unregistered
pnp: the driver 'i8042 aux' has been unregistered
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.10 $ 4 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:07' and the driver 'serial'
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pnp: the driver 'parport_pc' has been registered
pnp: match found with the PnP device '00:08' and the driver 'parport_pc'
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 6.1.16-k2
Copyright (c) 1999-2005 Intel Corporation.
ACPI: PCI Interrupt 0000:03:0a.0[A] -> GSI 20 (level, low) -> IRQ 17
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
tg3.c:v3.43 (Oct 24, 2005)
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:02:00.0 to 64
eth1: Tigon3 [partno(BCM95751) rev 4200 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:13:d3:4f:52:a2
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
eth1: dma_rwctrl[76180000]
PPP generic driver version 2.4.2
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ATIIXP: IDE controller at PCI slot 0000:00:14.1
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 19
ATIIXP: chipset revision 0
ATIIXP: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xe400-0xe407, BIOS settings: hda:pio, hdb:pio
ATIIXP: simplex device: DMA disabled
ide1: ATIIXP Bus-Master DMA disabled (BIOS)
Probing IDE interface ide0...
hda: HL-DT-STDVDRRW GWA-4166B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(44)
Uniform CD-ROM driver Revision: 3.20
libata version 1.12 loaded.
sata_sil 0000:00:12.0: version 0.9
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 20
ata1: SATA max UDMA/100 cmd 0xFFFFC2000000E080 ctl 0xFFFFC2000000E08A bmdma 0xFFFFC2000000E000 irq 20
ata2: SATA max UDMA/100 cmd 0xFFFFC2000000E0C0 ctl 0xFFFFC2000000E0CA bmdma 0xFFFFC2000000E008 irq 20
ata1: dev 0 cfg 49:2f00 82:7869 83:7f09 84:4633 85:7869 86:3e01 87:4623 88:203f
ata1: dev 0 ATA-7, max UDMA/100, 488397168 sectors: LBA48
ata1: dev 0 configured for UDMA/100
scsi0 : sata_sil
ata2: no device found (phy stat 00000000)
scsi1 : sata_sil
  Vendor: ATA       Model: Maxtor 7L250S0    Rev: BANC
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 < sda5 sda6 > sda3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 26
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
TCP bic registered
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
powernow-k8:    0 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
powernow-k8:    1 : fid 0xa (1800 MHz), vid 0xa (1300 mV)
powernow-k8:    2 : fid 0xc (2000 MHz), vid 0x8 (1350 mV)
powernow-k8:    3 : fid 0xe (2200 MHz), vid 0x6 (1400 mV)
cpu_init done, current fid 0xe, vid 0x6
ACPI wakeup devices: 
PCI0 USB0 USB1 USB2 AUDO  P2P  MAC UAR1 
ACPI: (supports S0 S3 S4 S5)
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 164k freed
NET: Registered protocol family 1
Adding 2811332k swap on /dev/sda5.  Priority:-1 extents:1 across:2811332k
EXT3 FS on sda1, internal journal
Real Time Clock Driver v1.12
Generic RTC Driver v1.07
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 18
Linux video capture interface: v1.00
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:03:0b.0[A] -> GSI 22 (level, low) -> IRQ 22
bttv0: Bt878 (rev 17) at 0000:03:0b.0, irq: 22, latency: 64, mmio: 0xfdcff000
bttv0: detected: I-O Data Co. GV-BCTV5/PCI [card=81], PCI subsystem ID is 10fc:d018
bttv0: using: IODATA GV-BCTV5/PCI [card=81,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00f6f0f7 [init]
bttv0: using tuner=17
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw])
tuner 0-0061: type set to 17 (Philips NTSC_M (MK2))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
input: PC Speaker as /class/input/input2
ts: Compaq touchscreen protocol output
e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
NET: Registered protocol family 17
NET: Registered protocol family 10
Disabled Privacy Extensions on device ffffffff8043b040(lo)
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 24
ip_conntrack version 2.4 (3835 buckets, 30680 max) - 312 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
tg3: eth1: Link is up at 1000 Mbps, full duplex.
tg3: eth1: Flow control is on for TX and on for RX.
eth0: no IPv6 routers present
eth1: no IPv6 routers present



regards,
	junichi

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux