From: Hartmut Hackmann <[email protected]>
- leave I2C bridge open at pll_sleep to support Philips EUROPA based cards.
- give an error message if the communication with the pll fails.
Signed-off-by: Hartmut Hackmann <[email protected]>
Signed-off-by: Michael Krufky <[email protected]>
drivers/media/dvb/frontends/tda1004x.c | 21 +++++++++++++++++----
1 file changed, 17 insertions(+), 4 deletions(-)
--- linux-2.6.14-git3.orig/drivers/media/dvb/frontends/tda1004x.c
+++ linux-2.6.14-git3/drivers/media/dvb/frontends/tda1004x.c
@@ -420,7 +420,7 @@
struct tda1004x_state* state = fe->demodulator_priv;
tda1004x_write_byteI(state, TDA10046H_CONFPLL1, 0xf0);
- tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 10); // PLL M = 10
+ tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 0x0a); // PLL M = 10
if (state->config->xtal_freq == TDA10046_XTAL_4M ) {
dprintk("%s: setting up PLLs for a 4 MHz Xtal\n", __FUNCTION__);
tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 0); // PLL P = N = 0
@@ -597,7 +597,10 @@
// Init the tuner PLL
if (state->config->pll_init) {
tda1004x_enable_tuner_i2c(state);
- state->config->pll_init(fe);
+ if (state->config->pll_init(fe)) {
+ printk(KERN_ERR "tda1004x: pll init failed\n");
+ return -EIO;
+ }
tda1004x_disable_tuner_i2c(state);
}
@@ -667,7 +670,10 @@
// set frequency
tda1004x_enable_tuner_i2c(state);
- state->config->pll_set(fe, fe_params);
+ if (state->config->pll_set(fe, fe_params)) {
+ printk(KERN_ERR "tda1004x: pll set failed\n");
+ return -EIO;
+ }
tda1004x_disable_tuner_i2c(state);
// Hardcoded to use auto as much as possible on the TDA10045 as it
@@ -832,6 +838,8 @@
case TDA1004X_DEMOD_TDA10046:
tda1004x_write_mask(state, TDA1004X_AUTO, 0x40, 0x40);
+ msleep(1);
+ tda1004x_write_mask(state, TDA10046H_AGC_CONF, 4, 1);
break;
}
@@ -1129,7 +1137,12 @@
if (state->config->pll_sleep != NULL) {
tda1004x_enable_tuner_i2c(state);
state->config->pll_sleep(fe);
- tda1004x_disable_tuner_i2c(state);
+ if (state->config->if_freq != TDA10046_FREQ_052) {
+ /* special hack for Philips EUROPA Based boards:
+ * keep the I2c bridge open for tuner access in analog mode
+ */
+ tda1004x_disable_tuner_i2c(state);
+ }
}
tda1004x_write_mask(state, TDA1004X_CONFC4, 1, 1);
break;
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]