Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
to obtain misc fixes and cleanups, and to merge
the ATA passthru (SMART support) feature.
drivers/scsi/libata-core.c | 18 -
drivers/scsi/libata-scsi.c | 790 ++++++++++++++++++++++++++++++++++++--------
drivers/scsi/libata.h | 3
drivers/scsi/pdc_adma.c | 28 -
drivers/scsi/sata_promise.c | 4
drivers/scsi/sata_qstor.c | 2
drivers/scsi/sata_sil24.c | 35 +
drivers/scsi/sata_svw.c | 22 -
drivers/scsi/sata_vsc.c | 20 -
include/scsi/scsi.h | 3
10 files changed, 740 insertions(+), 185 deletions(-)
Al Viro:
sata_sil24 iomem annotations and fixes
Douglas Gilbert:
[libata scsi] MODE SELECT, strengthen mode sense
Ed Kear:
libata: add support for Promise SATA 300 TX2plus PDC40775
Jeff Garzik:
[libata] ATA passthru (arbitrary ATA command execution)
libata: Update 'passthru' branch for latest libata
[libata passthru] add (DRIVER_SENSE << 24) to all check-conditions
[libata passthru] update ATAPI completion for new error handling
[libata pdc_adma] minor fixes and cleanups
[libata sata_promise] add pci id
[libata] ensure ->tf_read() hook reads Status and Error registers
Jeff Raubitschek:
[libata passthru] fix leak on error
Randy Dunlap:
libata-core cleanups (updated)
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index f53d7b8..b1b1c6f 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -370,6 +370,8 @@ static void ata_tf_read_pio(struct ata_p
{
struct ata_ioports *ioaddr = &ap->ioaddr;
+ tf->command = ata_check_status(ap);
+ tf->feature = ata_chk_err(ap);
tf->nsect = inb(ioaddr->nsect_addr);
tf->lbal = inb(ioaddr->lbal_addr);
tf->lbam = inb(ioaddr->lbam_addr);
@@ -402,6 +404,8 @@ static void ata_tf_read_mmio(struct ata_
{
struct ata_ioports *ioaddr = &ap->ioaddr;
+ tf->command = ata_check_status(ap);
+ tf->feature = ata_chk_err(ap);
tf->nsect = readb((void __iomem *)ioaddr->nsect_addr);
tf->lbal = readb((void __iomem *)ioaddr->lbal_addr);
tf->lbam = readb((void __iomem *)ioaddr->lbam_addr);
@@ -4254,11 +4258,10 @@ int ata_device_add(const struct ata_prob
DPRINTK("ENTER\n");
/* alloc a container for our list of ATA ports (buses) */
- host_set = kmalloc(sizeof(struct ata_host_set) +
+ host_set = kzalloc(sizeof(struct ata_host_set) +
(ent->n_ports * sizeof(void *)), GFP_KERNEL);
if (!host_set)
return 0;
- memset(host_set, 0, sizeof(struct ata_host_set) + (ent->n_ports * sizeof(void *)));
spin_lock_init(&host_set->lock);
host_set->dev = dev;
@@ -4298,10 +4301,8 @@ int ata_device_add(const struct ata_prob
count++;
}
- if (!count) {
- kfree(host_set);
- return 0;
- }
+ if (!count)
+ goto err_free_ret;
/* obtain irq, that is shared between channels */
if (request_irq(ent->irq, ent->port_ops->irq_handler, ent->irq_flags,
@@ -4359,6 +4360,7 @@ err_out:
ata_host_remove(host_set->ports[i], 1);
scsi_host_put(host_set->ports[i]->host);
}
+err_free_ret:
kfree(host_set);
VPRINTK("EXIT, returning 0\n");
return 0;
@@ -4468,15 +4470,13 @@ ata_probe_ent_alloc(struct device *dev,
{
struct ata_probe_ent *probe_ent;
- probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
+ probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL);
if (!probe_ent) {
printk(KERN_ERR DRV_NAME "(%s): out of memory\n",
kobject_name(&(dev->kobj)));
return NULL;
}
- memset(probe_ent, 0, sizeof(*probe_ent));
-
INIT_LIST_HEAD(&probe_ent->node);
probe_ent->dev = dev;
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 5885888..89a04b1 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -40,14 +40,56 @@
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
+#include <linux/hdreg.h>
#include <asm/uaccess.h>
#include "libata.h"
+#define SECTOR_SIZE 512
+
typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scsicmd);
static struct ata_device *
ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev);
+#define RW_RECOVERY_MPAGE 0x1
+#define RW_RECOVERY_MPAGE_LEN 12
+#define CACHE_MPAGE 0x8
+#define CACHE_MPAGE_LEN 20
+#define CONTROL_MPAGE 0xa
+#define CONTROL_MPAGE_LEN 12
+#define ALL_MPAGES 0x3f
+#define ALL_SUB_MPAGES 0xff
+
+
+static const u8 def_rw_recovery_mpage[] = {
+ RW_RECOVERY_MPAGE,
+ RW_RECOVERY_MPAGE_LEN - 2,
+ (1 << 7) | /* AWRE, sat-r06 say it shall be 0 */
+ (1 << 6), /* ARRE (auto read reallocation) */
+ 0, /* read retry count */
+ 0, 0, 0, 0,
+ 0, /* write retry count */
+ 0, 0, 0
+};
+
+static const u8 def_cache_mpage[CACHE_MPAGE_LEN] = {
+ CACHE_MPAGE,
+ CACHE_MPAGE_LEN - 2,
+ 0, /* contains WCE, needs to be 0 for logic */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, /* contains DRA, needs to be 0 for logic */
+ 0, 0, 0, 0, 0, 0, 0
+};
+
+static const u8 def_control_mpage[CONTROL_MPAGE_LEN] = {
+ CONTROL_MPAGE,
+ CONTROL_MPAGE_LEN - 2,
+ 2, /* DSENSE=0, GLTSD=1 */
+ 0, /* [QAM+QERR may be 1, see 05-359r1] */
+ 0, 0, 0, 0, 0xff, 0xff,
+ 0, 30 /* extended self test time, see 05-359r1 */
+};
+
static void ata_scsi_invalid_field(struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *))
@@ -86,6 +128,150 @@ int ata_std_bios_param(struct scsi_devic
return 0;
}
+/**
+ * ata_cmd_ioctl - Handler for HDIO_DRIVE_CMD ioctl
+ * @dev: Device to whom we are issuing command
+ * @arg: User provided data for issuing command
+ *
+ * LOCKING:
+ * Defined by the SCSI layer. We don't really care.
+ *
+ * RETURNS:
+ * Zero on success, negative errno on error.
+ */
+
+int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg)
+{
+ int rc = 0;
+ u8 scsi_cmd[MAX_COMMAND_SIZE];
+ u8 args[4], *argbuf = NULL;
+ int argsize = 0;
+ struct scsi_request *sreq;
+
+ if (NULL == (void *)arg)
+ return -EINVAL;
+
+ if (copy_from_user(args, arg, sizeof(args)))
+ return -EFAULT;
+
+ sreq = scsi_allocate_request(scsidev, GFP_KERNEL);
+ if (!sreq)
+ return -EINTR;
+
+ memset(scsi_cmd, 0, sizeof(scsi_cmd));
+
+ if (args[3]) {
+ argsize = SECTOR_SIZE * args[3];
+ argbuf = kmalloc(argsize, GFP_KERNEL);
+ if (argbuf == NULL) {
+ rc = -ENOMEM;
+ goto error;
+ }
+
+ scsi_cmd[1] = (4 << 1); /* PIO Data-in */
+ scsi_cmd[2] = 0x0e; /* no off.line or cc, read from dev,
+ block count in sector count field */
+ sreq->sr_data_direction = DMA_FROM_DEVICE;
+ } else {
+ scsi_cmd[1] = (3 << 1); /* Non-data */
+ /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */
+ sreq->sr_data_direction = DMA_NONE;
+ }
+
+ scsi_cmd[0] = ATA_16;
+
+ scsi_cmd[4] = args[2];
+ if (args[0] == WIN_SMART) { /* hack -- ide driver does this too... */
+ scsi_cmd[6] = args[3];
+ scsi_cmd[8] = args[1];
+ scsi_cmd[10] = 0x4f;
+ scsi_cmd[12] = 0xc2;
+ } else {
+ scsi_cmd[6] = args[1];
+ }
+ scsi_cmd[14] = args[0];
+
+ /* Good values for timeout and retries? Values below
+ from scsi_ioctl_send_command() for default case... */
+ scsi_wait_req(sreq, scsi_cmd, argbuf, argsize, (10*HZ), 5);
+
+ if (sreq->sr_result) {
+ rc = -EIO;
+ goto error;
+ }
+
+ /* Need code to retrieve data from check condition? */
+
+ if ((argbuf)
+ && copy_to_user((void *)(arg + sizeof(args)), argbuf, argsize))
+ rc = -EFAULT;
+error:
+ scsi_release_request(sreq);
+
+ if (argbuf)
+ kfree(argbuf);
+
+ return rc;
+}
+
+/**
+ * ata_task_ioctl - Handler for HDIO_DRIVE_TASK ioctl
+ * @dev: Device to whom we are issuing command
+ * @arg: User provided data for issuing command
+ *
+ * LOCKING:
+ * Defined by the SCSI layer. We don't really care.
+ *
+ * RETURNS:
+ * Zero on success, negative errno on error.
+ */
+int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
+{
+ int rc = 0;
+ u8 scsi_cmd[MAX_COMMAND_SIZE];
+ u8 args[7];
+ struct scsi_request *sreq;
+
+ if (NULL == (void *)arg)
+ return -EINVAL;
+
+ if (copy_from_user(args, arg, sizeof(args)))
+ return -EFAULT;
+
+ memset(scsi_cmd, 0, sizeof(scsi_cmd));
+ scsi_cmd[0] = ATA_16;
+ scsi_cmd[1] = (3 << 1); /* Non-data */
+ /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */
+ scsi_cmd[4] = args[1];
+ scsi_cmd[6] = args[2];
+ scsi_cmd[8] = args[3];
+ scsi_cmd[10] = args[4];
+ scsi_cmd[12] = args[5];
+ scsi_cmd[14] = args[0];
+
+ sreq = scsi_allocate_request(scsidev, GFP_KERNEL);
+ if (!sreq) {
+ rc = -EINTR;
+ goto error;
+ }
+
+ sreq->sr_data_direction = DMA_NONE;
+ /* Good values for timeout and retries? Values below
+ from scsi_ioctl_send_command() for default case... */
+ scsi_wait_req(sreq, scsi_cmd, NULL, 0, (10*HZ), 5);
+
+ if (sreq->sr_result) {
+ rc = -EIO;
+ goto error;
+ }
+
+ /* Need code to retrieve data from check condition? */
+
+error:
+ scsi_release_request(sreq);
+ return rc;
+}
+
int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg)
{
struct ata_port *ap;
@@ -115,6 +301,16 @@ int ata_scsi_ioctl(struct scsi_device *s
return -EINVAL;
return 0;
+ case HDIO_DRIVE_CMD:
+ if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
+ return -EACCES;
+ return ata_cmd_ioctl(scsidev, arg);
+
+ case HDIO_DRIVE_TASK:
+ if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
+ return -EACCES;
+ return ata_task_ioctl(scsidev, arg);
+
default:
rc = -ENOTTY;
break;
@@ -173,23 +369,70 @@ struct ata_queued_cmd *ata_scsi_qc_new(s
}
/**
+ * ata_dump_status - user friendly display of error info
+ * @id: id of the port in question
+ * @tf: ptr to filled out taskfile
+ *
+ * Decode and dump the ATA error/status registers for the user so
+ * that they have some idea what really happened at the non
+ * make-believe layer.
+ *
+ * LOCKING:
+ * inherited from caller
+ */
+void ata_dump_status(unsigned id, struct ata_taskfile *tf)
+{
+ u8 stat = tf->command, err = tf->feature;
+
+ printk(KERN_WARNING "ata%u: status=0x%02x { ", id, stat);
+ if (stat & ATA_BUSY) {
+ printk("Busy }\n"); /* Data is not valid in this case */
+ } else {
+ if (stat & 0x40) printk("DriveReady ");
+ if (stat & 0x20) printk("DeviceFault ");
+ if (stat & 0x10) printk("SeekComplete ");
+ if (stat & 0x08) printk("DataRequest ");
+ if (stat & 0x04) printk("CorrectedError ");
+ if (stat & 0x02) printk("Index ");
+ if (stat & 0x01) printk("Error ");
+ printk("}\n");
+
+ if (err) {
+ printk(KERN_WARNING "ata%u: error=0x%02x { ", id, err);
+ if (err & 0x04) printk("DriveStatusError ");
+ if (err & 0x80) {
+ if (err & 0x04) printk("BadCRC ");
+ else printk("Sector ");
+ }
+ if (err & 0x40) printk("UncorrectableError ");
+ if (err & 0x10) printk("SectorIdNotFound ");
+ if (err & 0x02) printk("TrackZeroNotFound ");
+ if (err & 0x01) printk("AddrMarkNotFound ");
+ printk("}\n");
+ }
+ }
+}
+
+/**
* ata_to_sense_error - convert ATA error to SCSI error
- * @qc: Command that we are erroring out
* @drv_stat: value contained in ATA status register
+ * @drv_err: value contained in ATA error register
+ * @sk: the sense key we'll fill out
+ * @asc: the additional sense code we'll fill out
+ * @ascq: the additional sense code qualifier we'll fill out
*
- * Converts an ATA error into a SCSI error. While we are at it
- * we decode and dump the ATA error for the user so that they
- * have some idea what really happened at the non make-believe
- * layer.
+ * Converts an ATA error into a SCSI error. Fill out pointers to
+ * SK, ASC, and ASCQ bytes for later use in fixed or descriptor
+ * format sense blocks.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
-
-void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat)
+void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc,
+ u8 *ascq)
{
- struct scsi_cmnd *cmd = qc->scsicmd;
- u8 err = 0;
+ int i;
+
/* Based on the 3ware driver translation table */
static unsigned char sense_table[][4] = {
/* BBD|ECC|ID|MAR */
@@ -230,96 +473,184 @@ void ata_to_sense_error(struct ata_queue
{0x04, RECOVERED_ERROR, 0x11, 0x00}, // Recovered ECC error Medium error, recovered
{0xFF, 0xFF, 0xFF, 0xFF}, // END mark
};
- int i = 0;
/*
* Is this an error we can process/parse
*/
-
- if(drv_stat & ATA_ERR)
- /* Read the err bits */
- err = ata_chk_err(qc->ap);
-
- /* Display the ATA level error info */
-
- printk(KERN_WARNING "ata%u: status=0x%02x { ", qc->ap->id, drv_stat);
- if(drv_stat & 0x80)
- {
- printk("Busy ");
- err = 0; /* Data is not valid in this case */
+ if (drv_stat & ATA_BUSY) {
+ drv_err = 0; /* Ignore the err bits, they're invalid */
}
- else {
- if(drv_stat & 0x40) printk("DriveReady ");
- if(drv_stat & 0x20) printk("DeviceFault ");
- if(drv_stat & 0x10) printk("SeekComplete ");
- if(drv_stat & 0x08) printk("DataRequest ");
- if(drv_stat & 0x04) printk("CorrectedError ");
- if(drv_stat & 0x02) printk("Index ");
- if(drv_stat & 0x01) printk("Error ");
- }
- printk("}\n");
-
- if(err)
- {
- printk(KERN_WARNING "ata%u: error=0x%02x { ", qc->ap->id, err);
- if(err & 0x04) printk("DriveStatusError ");
- if(err & 0x80)
- {
- if(err & 0x04)
- printk("BadCRC ");
- else
- printk("Sector ");
+
+ if (drv_err) {
+ /* Look for drv_err */
+ for (i = 0; sense_table[i][0] != 0xFF; i++) {
+ /* Look for best matches first */
+ if ((sense_table[i][0] & drv_err) ==
+ sense_table[i][0]) {
+ *sk = sense_table[i][1];
+ *asc = sense_table[i][2];
+ *ascq = sense_table[i][3];
+ goto translate_done;
+ }
}
- if(err & 0x40) printk("UncorrectableError ");
- if(err & 0x10) printk("SectorIdNotFound ");
- if(err & 0x02) printk("TrackZeroNotFound ");
- if(err & 0x01) printk("AddrMarkNotFound ");
- printk("}\n");
+ /* No immediate match */
+ printk(KERN_WARNING "ata%u: no sense translation for "
+ "error 0x%02x\n", id, drv_err);
+ }
- /* Should we dump sector info here too ?? */
+ /* Fall back to interpreting status bits */
+ for (i = 0; stat_table[i][0] != 0xFF; i++) {
+ if (stat_table[i][0] & drv_stat) {
+ *sk = stat_table[i][1];
+ *asc = stat_table[i][2];
+ *ascq = stat_table[i][3];
+ goto translate_done;
+ }
}
+ /* No error? Undecoded? */
+ printk(KERN_WARNING "ata%u: no sense translation for status: 0x%02x\n",
+ id, drv_stat);
+
+ /* For our last chance pick, use medium read error because
+ * it's much more common than an ATA drive telling you a write
+ * has failed.
+ */
+ *sk = MEDIUM_ERROR;
+ *asc = 0x11; /* "unrecovered read error" */
+ *ascq = 0x04; /* "auto-reallocation failed" */
+
+ translate_done:
+ printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x to "
+ "SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n", id, drv_stat, drv_err,
+ *sk, *asc, *ascq);
+ return;
+}
+
+/*
+ * ata_gen_ata_desc_sense - Generate check condition sense block.
+ * @qc: Command that completed.
+ *
+ * This function is specific to the ATA descriptor format sense
+ * block specified for the ATA pass through commands. Regardless
+ * of whether the command errored or not, return a sense
+ * block. Copy all controller registers into the sense
+ * block. Clear sense key, ASC & ASCQ if there is no error.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *cmd = qc->scsicmd;
+ struct ata_taskfile *tf = &qc->tf;
+ unsigned char *sb = cmd->sense_buffer;
+ unsigned char *desc = sb + 8;
+ memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
- /* Look for err */
- while(sense_table[i][0] != 0xFF)
- {
- /* Look for best matches first */
- if((sense_table[i][0] & err) == sense_table[i][0])
- {
- ata_scsi_set_sense(cmd, sense_table[i][1] /* sk */,
- sense_table[i][2] /* asc */,
- sense_table[i][3] /* ascq */ );
- return;
- }
- i++;
+ cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
+
+ /*
+ * Read the controller registers.
+ */
+ assert(NULL != qc->ap->ops->tf_read);
+ qc->ap->ops->tf_read(qc->ap, tf);
+
+ /*
+ * Use ata_to_sense_error() to map status register bits
+ * onto sense key, asc & ascq.
+ */
+ if (unlikely(tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ))) {
+ ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
+ &sb[1], &sb[2], &sb[3]);
+ sb[1] &= 0x0f;
}
- /* No immediate match */
- if(err)
- printk(KERN_DEBUG "ata%u: no sense translation for 0x%02x\n", qc->ap->id, err);
- i = 0;
- /* Fall back to interpreting status bits */
- while(stat_table[i][0] != 0xFF)
- {
- if(stat_table[i][0] & drv_stat)
- {
- ata_scsi_set_sense(cmd, sense_table[i][1] /* sk */,
- sense_table[i][2] /* asc */,
- sense_table[i][3] /* ascq */ );
- return;
- }
- i++;
+ /*
+ * Sense data is current and format is descriptor.
+ */
+ sb[0] = 0x72;
+
+ desc[0] = 0x09;
+
+ /*
+ * Set length of additional sense data.
+ * Since we only populate descriptor 0, the total
+ * length is the same (fixed) length as descriptor 0.
+ */
+ desc[1] = sb[7] = 14;
+
+ /*
+ * Copy registers into sense buffer.
+ */
+ desc[2] = 0x00;
+ desc[3] = tf->feature; /* == error reg */
+ desc[5] = tf->nsect;
+ desc[7] = tf->lbal;
+ desc[9] = tf->lbam;
+ desc[11] = tf->lbah;
+ desc[12] = tf->device;
+ desc[13] = tf->command; /* == status reg */
+
+ /*
+ * Fill in Extend bit, and the high order bytes
+ * if applicable.
+ */
+ if (tf->flags & ATA_TFLAG_LBA48) {
+ desc[2] |= 0x01;
+ desc[4] = tf->hob_nsect;
+ desc[6] = tf->hob_lbal;
+ desc[8] = tf->hob_lbam;
+ desc[10] = tf->hob_lbah;
}
- /* No error ?? */
- printk(KERN_ERR "ata%u: called with no error (%02X)!\n", qc->ap->id, drv_stat);
- /* additional-sense-code[-qualifier] */
-
- if (cmd->sc_data_direction == DMA_FROM_DEVICE) {
- ata_scsi_set_sense(cmd, MEDIUM_ERROR, 0x11, 0x4);
- /* "unrecovered read error" */
- } else {
- ata_scsi_set_sense(cmd, MEDIUM_ERROR, 0xc, 0x2);
- /* "write error - auto-reallocation failed" */
+}
+
+/**
+ * ata_gen_fixed_sense - generate a SCSI fixed sense block
+ * @qc: Command that we are erroring out
+ *
+ * Leverage ata_to_sense_error() to give us the codes. Fit our
+ * LBA in here if there's room.
+ *
+ * LOCKING:
+ * inherited from caller
+ */
+void ata_gen_fixed_sense(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *cmd = qc->scsicmd;
+ struct ata_taskfile *tf = &qc->tf;
+ unsigned char *sb = cmd->sense_buffer;
+
+ memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
+
+ cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
+
+ /*
+ * Read the controller registers.
+ */
+ assert(NULL != qc->ap->ops->tf_read);
+ qc->ap->ops->tf_read(qc->ap, tf);
+
+ /*
+ * Use ata_to_sense_error() to map status register bits
+ * onto sense key, asc & ascq.
+ */
+ if (unlikely(tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ))) {
+ ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
+ &sb[2], &sb[12], &sb[13]);
+ sb[2] &= 0x0f;
+ }
+
+ sb[0] = 0x70;
+ sb[7] = 0x0a;
+
+ if (tf->flags & ATA_TFLAG_LBA && !(tf->flags & ATA_TFLAG_LBA48)) {
+ /* A small (28b) LBA will fit in the 32b info field */
+ sb[0] |= 0x80; /* set valid bit */
+ sb[3] = tf->device & 0x0f;
+ sb[4] = tf->lbah;
+ sb[5] = tf->lbam;
+ sb[6] = tf->lbal;
}
}
@@ -871,11 +1202,36 @@ nothing_to_do:
static int ata_scsi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
{
struct scsi_cmnd *cmd = qc->scsicmd;
+ int need_sense = drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ);
- if (unlikely(drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ)))
- ata_to_sense_error(qc, drv_stat);
- else
- cmd->result = SAM_STAT_GOOD;
+ /* For ATA pass thru (SAT) commands, generate a sense block if
+ * user mandated it or if there's an error. Note that if we
+ * generate because the user forced us to, a check condition
+ * is generated and the ATA register values are returned
+ * whether the command completed successfully or not. If there
+ * was no error, SK, ASC and ASCQ will all be zero.
+ */
+ if (((cmd->cmnd[0] == ATA_16) || (cmd->cmnd[0] == ATA_12)) &&
+ ((cmd->cmnd[2] & 0x20) || need_sense)) {
+ ata_gen_ata_desc_sense(qc);
+ } else {
+ if (!need_sense) {
+ cmd->result = SAM_STAT_GOOD;
+ } else {
+ /* TODO: decide which descriptor format to use
+ * for 48b LBA devices and call that here
+ * instead of the fixed desc, which is only
+ * good for smaller LBA (and maybe CHS?)
+ * devices.
+ */
+ ata_gen_fixed_sense(qc);
+ }
+ }
+
+ if (need_sense) {
+ /* The ata_gen_..._sense routines fill in tf */
+ ata_dump_status(qc->ap->id, &qc->tf);
+ }
qc->scsidone(cmd);
@@ -1266,13 +1622,9 @@ static void ata_msense_push(u8 **ptr_io,
static unsigned int ata_msense_caching(u16 *id, u8 **ptr_io,
const u8 *last)
{
- u8 page[] = {
- 0x8, /* page code */
- 0x12, /* page length */
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 10 zeroes */
- 0, 0, 0, 0, 0, 0, 0, 0 /* 8 zeroes */
- };
+ u8 page[CACHE_MPAGE_LEN];
+ memcpy(page, def_cache_mpage, sizeof(page));
if (ata_id_wcache_enabled(id))
page[2] |= (1 << 2); /* write cache enable */
if (!ata_id_rahead_enabled(id))
@@ -1296,15 +1648,9 @@ static unsigned int ata_msense_caching(u
static unsigned int ata_msense_ctl_mode(u8 **ptr_io, const u8 *last)
{
- const u8 page[] = {0xa, 0xa, 6, 0, 0, 0, 0, 0, 0xff, 0xff, 0, 30};
-
- /* byte 2: set the descriptor format sense data bit (bit 2)
- * since we need to support returning this format for SAT
- * commands and any SCSI commands against a 48b LBA device.
- */
-
- ata_msense_push(ptr_io, last, page, sizeof(page));
- return sizeof(page);
+ ata_msense_push(ptr_io, last, def_control_mpage,
+ sizeof(def_control_mpage));
+ return sizeof(def_control_mpage);
}
/**
@@ -1321,15 +1667,10 @@ static unsigned int ata_msense_ctl_mode(
static unsigned int ata_msense_rw_recovery(u8 **ptr_io, const u8 *last)
{
- const u8 page[] = {
- 0x1, /* page code */
- 0xa, /* page length */
- (1 << 7) | (1 << 6), /* note auto r/w reallocation */
- 0, 0, 0, 0, 0, 0, 0, 0, 0 /* 9 zeroes */
- };
- ata_msense_push(ptr_io, last, page, sizeof(page));
- return sizeof(page);
+ ata_msense_push(ptr_io, last, def_rw_recovery_mpage,
+ sizeof(def_rw_recovery_mpage));
+ return sizeof(def_rw_recovery_mpage);
}
/**
@@ -1338,7 +1679,9 @@ static unsigned int ata_msense_rw_recove
* @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
* @buflen: Response buffer length.
*
- * Simulate MODE SENSE commands.
+ * Simulate MODE SENSE commands. Assume this is invoked for direct
+ * access devices (e.g. disks) only. There should be no block
+ * descriptor for other device types.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
@@ -1348,15 +1691,22 @@ unsigned int ata_scsiop_mode_sense(struc
unsigned int buflen)
{
u8 *scsicmd = args->cmd->cmnd, *p, *last;
- unsigned int page_control, six_byte, output_len;
+ const u8 sat_blk_desc[] = {
+ 0, 0, 0, 0, /* number of blocks: sat unspecified */
+ 0,
+ 0, 0x2, 0x0 /* block length: 512 bytes */
+ };
+ u8 pg, spg;
+ unsigned int ebd, page_control, six_byte, output_len, alloc_len, minlen;
VPRINTK("ENTER\n");
six_byte = (scsicmd[0] == MODE_SENSE);
-
- /* we only support saved and current values (which we treat
- * in the same manner)
+ ebd = !(scsicmd[1] & 0x8); /* dbd bit inverted == edb */
+ /*
+ * LLBA bit in msense(10) ignored (compliant)
*/
+
page_control = scsicmd[2] >> 6;
switch (page_control) {
case 0: /* current */
@@ -1369,29 +1719,42 @@ unsigned int ata_scsiop_mode_sense(struc
goto invalid_fld;
}
- if (six_byte)
- output_len = 4;
- else
- output_len = 8;
+ if (six_byte) {
+ output_len = 4 + (ebd ? 8 : 0);
+ alloc_len = scsicmd[4];
+ } else {
+ output_len = 8 + (ebd ? 8 : 0);
+ alloc_len = (scsicmd[7] << 8) + scsicmd[8];
+ }
+ minlen = (alloc_len < buflen) ? alloc_len : buflen;
p = rbuf + output_len;
- last = rbuf + buflen - 1;
+ last = rbuf + minlen - 1;
+
+ pg = scsicmd[2] & 0x3f;
+ spg = scsicmd[3];
+ /*
+ * No mode subpages supported (yet) but asking for _all_
+ * subpages may be valid
+ */
+ if (spg && (spg != ALL_SUB_MPAGES))
+ goto invalid_fld;
- switch(scsicmd[2] & 0x3f) {
- case 0x01: /* r/w error recovery */
+ switch(pg) {
+ case RW_RECOVERY_MPAGE:
output_len += ata_msense_rw_recovery(&p, last);
break;
- case 0x08: /* caching */
+ case CACHE_MPAGE:
output_len += ata_msense_caching(args->id, &p, last);
break;
- case 0x0a: { /* control mode */
+ case CONTROL_MPAGE: {
output_len += ata_msense_ctl_mode(&p, last);
break;
}
- case 0x3f: /* all pages */
+ case ALL_MPAGES:
output_len += ata_msense_rw_recovery(&p, last);
output_len += ata_msense_caching(args->id, &p, last);
output_len += ata_msense_ctl_mode(&p, last);
@@ -1401,15 +1764,31 @@ unsigned int ata_scsiop_mode_sense(struc
goto invalid_fld;
}
+ if (minlen < 1)
+ return 0;
if (six_byte) {
output_len--;
rbuf[0] = output_len;
+ if (ebd) {
+ if (minlen > 3)
+ rbuf[3] = sizeof(sat_blk_desc);
+ if (minlen > 11)
+ memcpy(rbuf + 4, sat_blk_desc,
+ sizeof(sat_blk_desc));
+ }
} else {
output_len -= 2;
rbuf[0] = output_len >> 8;
- rbuf[1] = output_len;
+ if (minlen > 1)
+ rbuf[1] = output_len;
+ if (ebd) {
+ if (minlen > 7)
+ rbuf[7] = sizeof(sat_blk_desc);
+ if (minlen > 15)
+ memcpy(rbuf + 8, sat_blk_desc,
+ sizeof(sat_blk_desc));
+ }
}
-
return 0;
invalid_fld:
@@ -1623,7 +2002,12 @@ static int atapi_qc_complete(struct ata_
VPRINTK("ENTER, drv_stat == 0x%x\n", drv_stat);
if (unlikely(drv_stat & (ATA_BUSY | ATA_DRQ)))
- ata_to_sense_error(qc, drv_stat);
+ /* FIXME: not quite right; we don't want the
+ * translation of taskfile registers into
+ * a sense descriptors, since that's only
+ * correct for ATA, not ATAPI
+ */
+ ata_gen_ata_desc_sense(qc);
else if (unlikely(drv_stat & ATA_ERR)) {
DPRINTK("request check condition\n");
@@ -1782,6 +2166,143 @@ ata_scsi_find_dev(struct ata_port *ap, c
return dev;
}
+/*
+ * ata_scsi_map_proto - Map pass-thru protocol value to taskfile value.
+ * @byte1: Byte 1 from pass-thru CDB.
+ *
+ * RETURNS:
+ * ATA_PROT_UNKNOWN if mapping failed/unimplemented, protocol otherwise.
+ */
+static u8
+ata_scsi_map_proto(u8 byte1)
+{
+ switch((byte1 & 0x1e) >> 1) {
+ case 3: /* Non-data */
+ return ATA_PROT_NODATA;
+
+ case 6: /* DMA */
+ return ATA_PROT_DMA;
+
+ case 4: /* PIO Data-in */
+ case 5: /* PIO Data-out */
+ if (byte1 & 0xe0) {
+ return ATA_PROT_PIO_MULT;
+ }
+ return ATA_PROT_PIO;
+
+ case 10: /* Device Reset */
+ case 0: /* Hard Reset */
+ case 1: /* SRST */
+ case 2: /* Bus Idle */
+ case 7: /* Packet */
+ case 8: /* DMA Queued */
+ case 9: /* Device Diagnostic */
+ case 11: /* UDMA Data-in */
+ case 12: /* UDMA Data-Out */
+ case 13: /* FPDMA */
+ default: /* Reserved */
+ break;
+ }
+
+ return ATA_PROT_UNKNOWN;
+}
+
+/**
+ * ata_scsi_pass_thru - convert ATA pass-thru CDB to taskfile
+ * @qc: command structure to be initialized
+ * @cmd: SCSI command to convert
+ *
+ * Handles either 12 or 16-byte versions of the CDB.
+ *
+ * RETURNS:
+ * Zero on success, non-zero on failure.
+ */
+static unsigned int
+ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd)
+{
+ struct ata_taskfile *tf = &(qc->tf);
+ struct scsi_cmnd *cmd = qc->scsicmd;
+
+ if ((tf->protocol = ata_scsi_map_proto(scsicmd[1])) == ATA_PROT_UNKNOWN)
+ return 1;
+
+ /*
+ * 12 and 16 byte CDBs use different offsets to
+ * provide the various register values.
+ */
+ if (scsicmd[0] == ATA_16) {
+ /*
+ * 16-byte CDB - may contain extended commands.
+ *
+ * If that is the case, copy the upper byte register values.
+ */
+ if (scsicmd[1] & 0x01) {
+ tf->hob_feature = scsicmd[3];
+ tf->hob_nsect = scsicmd[5];
+ tf->hob_lbal = scsicmd[7];
+ tf->hob_lbam = scsicmd[9];
+ tf->hob_lbah = scsicmd[11];
+ tf->flags |= ATA_TFLAG_LBA48;
+ } else
+ tf->flags &= ~ATA_TFLAG_LBA48;
+
+ /*
+ * Always copy low byte, device and command registers.
+ */
+ tf->feature = scsicmd[4];
+ tf->nsect = scsicmd[6];
+ tf->lbal = scsicmd[8];
+ tf->lbam = scsicmd[10];
+ tf->lbah = scsicmd[12];
+ tf->device = scsicmd[13];
+ tf->command = scsicmd[14];
+ } else {
+ /*
+ * 12-byte CDB - incapable of extended commands.
+ */
+ tf->flags &= ~ATA_TFLAG_LBA48;
+
+ tf->feature = scsicmd[3];
+ tf->nsect = scsicmd[4];
+ tf->lbal = scsicmd[5];
+ tf->lbam = scsicmd[6];
+ tf->lbah = scsicmd[7];
+ tf->device = scsicmd[8];
+ tf->command = scsicmd[9];
+ }
+
+ /*
+ * Filter SET_FEATURES - XFER MODE command -- otherwise,
+ * SET_FEATURES - XFER MODE must be preceded/succeeded
+ * by an update to hardware-specific registers for each
+ * controller (i.e. the reason for ->set_piomode(),
+ * ->set_dmamode(), and ->post_set_mode() hooks).
+ */
+ if ((tf->command == ATA_CMD_SET_FEATURES)
+ && (tf->feature == SETFEATURES_XFER))
+ return 1;
+
+ /*
+ * Set flags so that all registers will be written,
+ * and pass on write indication (used for PIO/DMA
+ * setup.)
+ */
+ tf->flags |= (ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE);
+
+ if (cmd->sc_data_direction == DMA_TO_DEVICE)
+ tf->flags |= ATA_TFLAG_WRITE;
+
+ /*
+ * Set transfer length.
+ *
+ * TODO: find out if we need to do more here to
+ * cover scatter/gather case.
+ */
+ qc->nsect = cmd->bufflen / ATA_SECT_SIZE;
+
+ return 0;
+}
+
/**
* ata_get_xlat_func - check if SCSI to ATA translation is possible
* @dev: ATA device
@@ -1814,6 +2335,11 @@ static inline ata_xlat_func_t ata_get_xl
case VERIFY:
case VERIFY_16:
return ata_scsi_verify_xlat;
+
+ case ATA_12:
+ case ATA_16:
+ return ata_scsi_pass_thru;
+
case START_STOP:
return ata_scsi_start_stop_xlat;
}
@@ -1972,7 +2498,7 @@ void ata_scsi_simulate(u16 *id,
ata_scsi_rbuf_fill(&args, ata_scsiop_report_luns);
break;
- /* mandantory commands we haven't implemented yet */
+ /* mandatory commands we haven't implemented yet */
case REQUEST_SENSE:
/* all other commands */
diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h
index 3d60190..65c264b 100644
--- a/drivers/scsi/libata.h
+++ b/drivers/scsi/libata.h
@@ -50,13 +50,14 @@ extern void ata_dev_select(struct ata_po
unsigned int wait, unsigned int can_sleep);
extern void ata_tf_to_host_nolock(struct ata_port *ap, const struct ata_taskfile *tf);
extern void swap_buf_le16(u16 *buf, unsigned int buf_words);
+extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg);
+extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg);
/* libata-scsi.c */
extern void atapi_request_sense(struct ata_port *ap, struct ata_device *dev,
struct scsi_cmnd *cmd);
extern void ata_scsi_scan_host(struct ata_port *ap);
-extern void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat);
extern int ata_scsi_error(struct Scsi_Host *host);
extern unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf,
unsigned int buflen);
diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c
index 9820f27..af99feb 100644
--- a/drivers/scsi/pdc_adma.c
+++ b/drivers/scsi/pdc_adma.c
@@ -46,7 +46,7 @@
#include <linux/libata.h>
#define DRV_NAME "pdc_adma"
-#define DRV_VERSION "0.01"
+#define DRV_VERSION "0.03"
/* macro to calculate base address for ATA regs */
#define ADMA_ATA_REGS(base,port_no) ((base) + ((port_no) * 0x40))
@@ -79,7 +79,6 @@ enum {
aNIEN = (1 << 8), /* irq mask: 1==masked */
aGO = (1 << 7), /* packet trigger ("Go!") */
aRSTADM = (1 << 5), /* ADMA logic reset */
- aRSTA = (1 << 2), /* ATA hard reset */
aPIOMD4 = 0x0003, /* PIO mode 4 */
/* ADMA_STATUS register bits */
@@ -452,24 +451,25 @@ static inline unsigned int adma_intr_pkt
struct adma_port_priv *pp;
struct ata_queued_cmd *qc;
void __iomem *chan = ADMA_REGS(mmio_base, port_no);
- u8 drv_stat, status = readb(chan + ADMA_STATUS);
+ u8 drv_stat = 0, status = readb(chan + ADMA_STATUS);
if (status == 0)
continue;
handled = 1;
adma_enter_reg_mode(ap);
- if ((ap->flags & ATA_FLAG_PORT_DISABLED))
+ if (ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))
continue;
pp = ap->private_data;
if (!pp || pp->state != adma_state_pkt)
continue;
qc = ata_qc_from_tag(ap, ap->active_tag);
- drv_stat = 0;
- if ((status & (aPERR | aPSD | aUIRQ)))
- drv_stat = ATA_ERR;
- else if (pp->pkt[0] != cDONE)
- drv_stat = ATA_ERR;
- ata_qc_complete(qc, drv_stat);
+ if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
+ if ((status & (aPERR | aPSD | aUIRQ)))
+ drv_stat = ATA_ERR;
+ else if (pp->pkt[0] != cDONE)
+ drv_stat = ATA_ERR;
+ ata_qc_complete(qc, drv_stat);
+ }
}
return handled;
}
@@ -490,7 +490,7 @@ static inline unsigned int adma_intr_mmi
if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
/* check main status, clearing INTRQ */
- u8 status = ata_chk_status(ap);
+ u8 status = ata_check_status(ap);
if ((status & ATA_BUSY))
continue;
DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
@@ -561,15 +561,15 @@ static int adma_port_start(struct ata_po
if ((pp->pkt_dma & 7) != 0) {
printk("bad alignment for pp->pkt_dma: %08x\n",
(u32)pp->pkt_dma);
- goto err_out_kfree2;
+ dma_free_coherent(dev, ADMA_PKT_BYTES,
+ pp->pkt, pp->pkt_dma);
+ goto err_out_kfree;
}
memset(pp->pkt, 0, ADMA_PKT_BYTES);
ap->private_data = pp;
adma_reinit_engine(ap);
return 0;
-err_out_kfree2:
- kfree(pp);
err_out_kfree:
kfree(pp);
err_out:
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
index eee93b0..63911f1 100644
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -195,6 +195,8 @@ static struct ata_port_info pdc_port_inf
static struct pci_device_id pdc_ata_pci_tbl[] = {
{ PCI_VENDOR_ID_PROMISE, 0x3371, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_2037x },
+ { PCI_VENDOR_ID_PROMISE, 0x3570, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_2037x },
{ PCI_VENDOR_ID_PROMISE, 0x3571, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_2037x },
{ PCI_VENDOR_ID_PROMISE, 0x3373, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
@@ -207,6 +209,8 @@ static struct pci_device_id pdc_ata_pci_
board_2037x },
{ PCI_VENDOR_ID_PROMISE, 0x3d75, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_2037x },
+ { PCI_VENDOR_ID_PROMISE, 0x3d73, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_2037x },
{ PCI_VENDOR_ID_PROMISE, 0x3318, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_20319 },
diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c
index 250dafa..1aaf330 100644
--- a/drivers/scsi/sata_qstor.c
+++ b/drivers/scsi/sata_qstor.c
@@ -433,7 +433,7 @@ static inline unsigned int qs_intr_mmio(
if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
/* check main status, clearing INTRQ */
- u8 status = ata_chk_status(ap);
+ u8 status = ata_check_status(ap);
if ((status & ATA_BUSY))
continue;
DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index 32d730b..51855d3 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -220,8 +220,8 @@ struct sil24_port_priv {
/* ap->host_set->private_data */
struct sil24_host_priv {
- void *host_base; /* global controller control (128 bytes @BAR0) */
- void *port_base; /* port registers (4 * 8192 bytes @BAR2) */
+ void __iomem *host_base; /* global controller control (128 bytes @BAR0) */
+ void __iomem *port_base; /* port registers (4 * 8192 bytes @BAR2) */
};
static u8 sil24_check_status(struct ata_port *ap);
@@ -349,10 +349,12 @@ static struct ata_port_info sil24_port_i
static inline void sil24_update_tf(struct ata_port *ap)
{
struct sil24_port_priv *pp = ap->private_data;
- void *port = (void *)ap->ioaddr.cmd_addr;
- struct sil24_prb *prb = port;
+ void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
+ struct sil24_prb __iomem *prb = port;
+ u8 fis[6 * 4];
- ata_tf_from_fis(prb->fis, &pp->tf);
+ memcpy_fromio(fis, prb->fis, 6 * 4);
+ ata_tf_from_fis(fis, &pp->tf);
}
static u8 sil24_check_status(struct ata_port *ap)
@@ -376,9 +378,9 @@ static int sil24_scr_map[] = {
static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg)
{
- void *scr_addr = (void *)ap->ioaddr.scr_addr;
+ void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr;
if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
- void *addr;
+ void __iomem *addr;
addr = scr_addr + sil24_scr_map[sc_reg] * 4;
return readl(scr_addr + sil24_scr_map[sc_reg] * 4);
}
@@ -387,9 +389,9 @@ static u32 sil24_scr_read(struct ata_por
static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
{
- void *scr_addr = (void *)ap->ioaddr.scr_addr;
+ void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr;
if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
- void *addr;
+ void __iomem *addr;
addr = scr_addr + sil24_scr_map[sc_reg] * 4;
writel(val, scr_addr + sil24_scr_map[sc_reg] * 4);
}
@@ -454,7 +456,7 @@ static void sil24_qc_prep(struct ata_que
static int sil24_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
- void *port = (void *)ap->ioaddr.cmd_addr;
+ void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
struct sil24_port_priv *pp = ap->private_data;
dma_addr_t paddr = pp->cmd_block_dma + qc->tag * sizeof(*pp->cmd_block);
@@ -467,7 +469,7 @@ static void sil24_irq_clear(struct ata_p
/* unused */
}
-static int __sil24_reset_controller(void *port)
+static int __sil24_reset_controller(void __iomem *port)
{
int cnt;
u32 tmp;
@@ -493,7 +495,7 @@ static void sil24_reset_controller(struc
{
printk(KERN_NOTICE DRV_NAME
" ata%u: resetting controller...\n", ap->id);
- if (__sil24_reset_controller((void *)ap->ioaddr.cmd_addr))
+ if (__sil24_reset_controller((void __iomem *)ap->ioaddr.cmd_addr))
printk(KERN_ERR DRV_NAME
" ata%u: failed to reset controller\n", ap->id);
}
@@ -527,7 +529,7 @@ static void sil24_error_intr(struct ata_
{
struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
struct sil24_port_priv *pp = ap->private_data;
- void *port = (void *)ap->ioaddr.cmd_addr;
+ void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
u32 irq_stat, cmd_err, sstatus, serror;
irq_stat = readl(port + PORT_IRQ_STAT);
@@ -574,7 +576,7 @@ static void sil24_error_intr(struct ata_
static inline void sil24_host_intr(struct ata_port *ap)
{
struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
- void *port = (void *)ap->ioaddr.cmd_addr;
+ void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
u32 slot_stat;
slot_stat = readl(port + PORT_SLOT_STAT);
@@ -689,7 +691,8 @@ static int sil24_init_one(struct pci_dev
struct ata_port_info *pinfo = &sil24_port_info[board_id];
struct ata_probe_ent *probe_ent = NULL;
struct sil24_host_priv *hpriv = NULL;
- void *host_base = NULL, *port_base = NULL;
+ void __iomem *host_base = NULL;
+ void __iomem *port_base = NULL;
int i, rc;
if (!printed_version++)
@@ -771,7 +774,7 @@ static int sil24_init_one(struct pci_dev
writel(0, host_base + HOST_CTRL);
for (i = 0; i < probe_ent->n_ports; i++) {
- void *port = port_base + i * PORT_REGS_SIZE;
+ void __iomem *port = port_base + i * PORT_REGS_SIZE;
unsigned long portu = (unsigned long)port;
u32 tmp;
int cnt;
diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
index e0f9570..46208f5 100644
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -84,6 +84,8 @@
/* Port stride */
#define K2_SATA_PORT_OFFSET 0x100
+static u8 k2_stat_check_status(struct ata_port *ap);
+
static u32 k2_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
{
@@ -136,16 +138,24 @@ static void k2_sata_tf_load(struct ata_p
static void k2_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
- u16 nsect, lbal, lbam, lbah;
+ u16 nsect, lbal, lbam, lbah, feature;
- nsect = tf->nsect = readw(ioaddr->nsect_addr);
- lbal = tf->lbal = readw(ioaddr->lbal_addr);
- lbam = tf->lbam = readw(ioaddr->lbam_addr);
- lbah = tf->lbah = readw(ioaddr->lbah_addr);
+ tf->command = k2_stat_check_status(ap);
tf->device = readw(ioaddr->device_addr);
+ feature = readw(ioaddr->error_addr);
+ nsect = readw(ioaddr->nsect_addr);
+ lbal = readw(ioaddr->lbal_addr);
+ lbam = readw(ioaddr->lbam_addr);
+ lbah = readw(ioaddr->lbah_addr);
+
+ tf->feature = feature;
+ tf->nsect = nsect;
+ tf->lbal = lbal;
+ tf->lbam = lbam;
+ tf->lbah = lbah;
if (tf->flags & ATA_TFLAG_LBA48) {
- tf->hob_feature = readw(ioaddr->error_addr) >> 8;
+ tf->hob_feature = feature >> 8;
tf->hob_nsect = nsect >> 8;
tf->hob_lbal = lbal >> 8;
tf->hob_lbam = lbam >> 8;
diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
index 5af05fd..54273e0 100644
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -153,16 +153,24 @@ static void vsc_sata_tf_load(struct ata_
static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
- u16 nsect, lbal, lbam, lbah;
+ u16 nsect, lbal, lbam, lbah, feature;
- nsect = tf->nsect = readw(ioaddr->nsect_addr);
- lbal = tf->lbal = readw(ioaddr->lbal_addr);
- lbam = tf->lbam = readw(ioaddr->lbam_addr);
- lbah = tf->lbah = readw(ioaddr->lbah_addr);
+ tf->command = ata_check_status(ap);
tf->device = readw(ioaddr->device_addr);
+ feature = readw(ioaddr->error_addr);
+ nsect = readw(ioaddr->nsect_addr);
+ lbal = readw(ioaddr->lbal_addr);
+ lbam = readw(ioaddr->lbam_addr);
+ lbah = readw(ioaddr->lbah_addr);
+
+ tf->feature = feature;
+ tf->nsect = nsect;
+ tf->lbal = lbal;
+ tf->lbam = lbam;
+ tf->lbah = lbah;
if (tf->flags & ATA_TFLAG_LBA48) {
- tf->hob_feature = readb(ioaddr->error_addr);
+ tf->hob_feature = feature >> 8;
tf->hob_nsect = nsect >> 8;
tf->hob_lbal = lbal >> 8;
tf->hob_lbam = lbam >> 8;
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index b361172..6cb1e27 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -116,6 +116,9 @@ extern const char *const scsi_device_typ
/* values for service action in */
#define SAI_READ_CAPACITY_16 0x10
+/* Values for T10/04-262r7 */
+#define ATA_16 0x85 /* 16-byte pass-thru */
+#define ATA_12 0xa1 /* 12-byte pass-thru */
/*
* SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
