Le Friday 28 October 2005 00:03, Andrew Morton a écrit :
| Damir Perisa <[email protected]> wrote:
| > isn't anybody else using ide-cs? i feel lonely!
|
| That's called "stunned silence".
ah ... then it's ok ;-)
| | [...]
|
| I'd have thought this was basically impossible. It's saying that
| drivers/pcmcia/ds.c isn't present. What's the setting of
| CONFIG_PCMCIA in your .config?
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_PCMCIA_PROBE=y
all other PCMCIA are modules ( =m)
| Perhaps the modprobe dependencies are screwed up. Try modprobing
| pcmcia.o by hand before inserting the card?
[17194333.620000] cs: memory probe 0xf0000000-0xf80fffff: excluding
0xf0000000-0xf87fffff
[17194333.644000] pcmcia: Detected deprecated PCMCIA ioctl usage.
[17194333.644000] pcmcia: This interface will soon be removed from the
kernel; please expect breakage unless you upgrade to new tools.
[17194333.644000] pcmcia: see
http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for
details.
[17194334.032000] Probing IDE interface ide2...
[17194334.320000] hde: 1024MB Flash Card, CFA DISK drive
[17194334.992000] ide2 at 0x4100-0x4107,0x410e on irq 3
[17194334.992000] hde: max request size: 128KiB
[17194334.992000] hde: 2001888 sectors (1024 MB) w/1KiB Cache,
CHS=1986/16/63
[17194334.992000] hde: cache flushes not supported
[17194334.992000] hde: hde1
[17194335.004000] ide-cs: hde: Vcc = 3.3, Vpp = 0.0
[17194335.224000] hde: hde1
[17194335.632000] hde: hde1
[17194335.736000] hde: hde1
[17194335.744000] hde: hde1
... ("hde: hde1" repeating)...
ok, now the situation is less lethal, but still no proper ide-cs working.
there are no unknown symbols now, but the other output in dmesg is the
same. especially, the loop to output "hde: hde1" is here, but if i remove
the card, it stops and the system is still responsible.
i checked something i forgot to check before... is the hde device seen
in /sys somewhere, when the card is plugged in. the answer is yes!:
/sys/block/hde/hde1/
presents itself fully normal like other ide drives. in
/sys/block/hde/hde1/sample.sh
i found "mknod /dev/hde1 b 33 1" and tried to run it. successfully!
the result is: in dmesg, the "hde: hde1" output loop stopped and my card
is working again!!!
so the trouble seems not only (or not at all) related to the kernel but
(also) to udev (i use 071), hotplug (mine is 2004_09_23), pcmciautils
(010) or something else.
can somebody tell me, what state of this process (discovering device,
loading needed modules, udev creating node under /dev) is the output
"hde: hde1" to dmesg and how can it be possible that it loops?
it seems that this chain of processing is stuck somewhere and needs a
execution of the command to create the node under /dev by hand to finish.
please anybody around with more experience with this systems help or
suggest where to search.
thank you in advance + greetings,
Damir
--
Penicillin doesn't kill bacteria. Technically, it keeps it from
reproducing.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]