Re: Status of Marvell SATA driver (was Re: Trying latest sata_mv - and getting freeze)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Oct 27 2005, Eugene Crosser wrote:
> Jens Axboe wrote:
> 
> >>>>My hardware is SMP Supermicro with 6 disks on
> >>>>Marvell MV88SX6081 8-port SATA II PCI-X Controller (rev 03)
> >>>>and the sata_mv.c is version 0.25 dated 22 Oct 2005
> >>>>
> >>>>The thing works with "old" mvsata340 driver, but the "new" kernel with
> >>>>your driver freezes when it starts to probe disks.  Even Magic SysRq
> >>>>does not work.  The last lines I see on screen are like this:
> >>>>
> >>>>sata_mv version 0.25
> >>>>ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 56 (level, low) -> IRQ 185
> >>>>sata_mv(0000:02:03.0) 32 slots 8 ports unknown mode IRQ via MSI
> >>>>ata1: SATA max UDMA/133 cmd 0x0 ctl 0xF8C22120 bmdma 0x0 irq 185
> >>>>ata2: .... <same things>            0xF8C24120 ...
> >>>>...
> >>>>ata8: .... <same thing>             0xF8C38120 ...
> >>>>ATA: abnormal status 0x80 on port 0xF8C2211C
> >>>>... <five more lines identical to the above>
> >>>>ata1: dev 0 ATA-7, max UDMA/133, 781422768 sectors: LBA48
> >>>>
> >>>>- and at this point it freezes hard.
> >>>>Any suggestions for me?  Any information I can collect to help
> >>>>troubleshooting?
> >>
> >>[...]
> >>
> >>>In the meantime, try turning off SMP and seeing if that makes a
> >>>difference.  There still might be a problem with the spinlocks and if so
> >>>it should go away in uniprocessor mode.
> >>
> >>'nosmp' makes no difference.
> > 
> > 
> > Booting with nosmp isn't enough, you need to compile the kernel with
> > CONFIG_SMP turned off. Otherwise the spinlocks will still be used and
> > could cause a hard hang.
> 
> Yeah, that was it!  It boots with the kernel compiled for UP.
> (did not yet have a chance to check how it works).
> Any chance that somebody competent would fix the driver for SMP?

Try booting with nmi_watchdog=1 with the SMP kernel, that should trigger
a watchdog oops when it hard hangs on the spinlock. Then it should be
trivial to fix.

-- 
Jens Axboe

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux