Re: [PATCH] Infineon TPM: move infineon driver off pci_dev

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: Kylene Hall <[email protected]>

On Wed, 2005-10-26 at 19:11 +0200, Marcel Selhorst wrote:
> Dear all,
> 
> the following patch moves the Infineon TPM driver off pci device
> and makes it a pure pnp-driver. It was tested with IFX0101 and
> IFX0102 and is now based on the tpm patchset (1 to 5) from Kylene
> Hall submitted yesterday.
> 
> Best regards,
> 
> Marcel Selhorst
> 
> Signed-off-by: Marcel Selhorst <[email protected]>
> ---
> 
> diff -pruN linux-2.6.14-rc5.ibm/drivers/char/tpm/tpm_infineon.c
> linux-2.6.14-rc5.infineon_v1.6/drivers/char/tpm/tpm_infineon.c
> --- linux-2.6.14-rc5.ibm/drivers/char/tpm/tpm_infineon.c	2005-10-26
> 15:21:53.000000000 +0200
> +++ linux-2.6.14-rc5.infineon_v1.6/drivers/char/tpm/tpm_infineon.c	2005-10-26
> 15:21:42.000000000 +0200
> @@ -5,6 +5,7 @@
>   * Specifications at www.trustedcomputinggroup.org
>   *
>   * Copyright (C) 2005, Marcel Selhorst <[email protected]>
> + * Sirrix AG - security technologies, http://www.sirrix.com and
>   * Applied Data Security Group, Ruhr-University Bochum, Germany
>   * Project-Homepage: http://www.prosec.rub.de/tpm
>   *
> @@ -31,7 +32,7 @@
>  /* These values will be filled after PnP-call */
>  static int TPM_INF_DATA = 0;
>  static int TPM_INF_ADDR = 0;
> -static int pnp_registered = 0;
> +static int TPM_INF_BASE = 0;
> 
>  /* TPM header definitions */
>  enum infineon_tpm_header {
> @@ -143,11 +144,9 @@ static int wait(struct tpm_chip *chip, i
>  	}
>  	if (i == TPM_MAX_TRIES) {	/* timeout occurs */
>  		if (wait_for_bit == STAT_XFE)
> -			dev_err(chip->dev,
> -				"Timeout in wait(STAT_XFE)\n");
> +			dev_err(chip->dev, "Timeout in wait(STAT_XFE)\n");
>  		if (wait_for_bit == STAT_RDA)
> -			dev_err(chip->dev,
> -				"Timeout in wait(STAT_RDA)\n");
> +			dev_err(chip->dev, "Timeout in wait(STAT_RDA)\n");
>  		return -EIO;
>  	}
>  	return 0;
> @@ -196,7 +195,7 @@ static int tpm_inf_recv(struct tpm_chip
>  	int ret;
>  	u32 size = 0;
> 
> -recv_begin:
> +      recv_begin:
>  	/* start receiving header */
>  	for (i = 0; i < 4; i++) {
>  		ret = wait(chip, STAT_RDA);
> @@ -221,8 +220,7 @@ recv_begin:
>  		}
> 
>  		if ((size == 0x6D00) && (buf[1] == 0x80)) {
> -			dev_err(chip->dev,
> -				"Error handling on vendor layer!\n");
> +			dev_err(chip->dev, "Error handling on vendor layer!\n");
>  			return -EIO;
>  		}
> 
> @@ -362,30 +360,11 @@ static const struct pnp_device_id tpm_pn
>  	{"IFX0102", 0},
>  	{"", 0}
>  };
> +
>  MODULE_DEVICE_TABLE(pnp, tpm_pnp_tbl);
> 
>  static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev,
> -					const struct pnp_device_id *dev_id)
> -{
> -	if (pnp_port_valid(dev, 0)) {
> -		TPM_INF_ADDR = (pnp_port_start(dev, 0) & 0xff);
> -		TPM_INF_DATA = ((TPM_INF_ADDR + 1) & 0xff);
> -		tpm_inf.base = pnp_port_start(dev, 1);
> -		dev_info(&dev->dev, "Found %s with ID %s\n",
> -		dev->name, dev_id->id);
> -		return 0;
> -	}
> -	return -ENODEV;
> -}
> -
> -static struct pnp_driver tpm_inf_pnp = {
> -	.name = "tpm_inf_pnp",
> -	.id_table = tpm_pnp_tbl,
> -	.probe = tpm_inf_pnp_probe,
> -};
> -
> -static int __devinit tpm_inf_probe(struct pci_dev *pci_dev,
> -				   const struct pci_device_id *pci_id)
> +				       const struct pnp_device_id *dev_id)
>  {
>  	int rc = 0;
>  	u8 iol, ioh;
> @@ -394,30 +373,23 @@ static int __devinit tpm_inf_probe(struc
>  	int productid[2];
>  	char chipname[20];
> 
> -	rc = pci_enable_device(pci_dev);
> -	if (rc)
> -		return rc;
> -
> -	dev_info(&pci_dev->dev, "LPC-bus found at 0x%x\n", pci_id->device);
> -
> -	/* read IO-ports from PnP */
> -	rc = pnp_register_driver(&tpm_inf_pnp);
> -	if (rc < 0) {
> -		dev_err(&pci_dev->dev,
> -			"Error %x from pnp_register_driver!\n",rc);
> -		goto error2;
> -	}
> -	if (!rc) {
> -		dev_info(&pci_dev->dev, "No Infineon TPM found!\n");
> -		goto error;
> +	/* read IO-ports through PnP */
> +	if (pnp_port_valid(dev, 0) &&
> +	    !(pnp_port_flags(dev, 0) & IORESOURCE_DISABLED)) {
> +		TPM_INF_ADDR = pnp_port_start(dev, 0);
> +		TPM_INF_DATA = (TPM_INF_ADDR + 1);
> +		TPM_INF_BASE = pnp_port_start(dev, 1);
> +		dev_info(&dev->dev, "Found %s with ID %s\n",
> +			 dev->name, dev_id->id);
> +		if (!((TPM_INF_BASE >> 8) & 0xff)) {
> +			tpm_inf.base = 0;
> +		} else {
> +			/* publish the base address to the tpm-driver
> +			   and use tpm_inf.base from now on */
> +			tpm_inf.base = TPM_INF_BASE;
> +		}
>  	} else {
> -		pnp_registered = 1;
> -	}
> -
> -	/* Make sure, we have received valid config ports */
> -	if (!TPM_INF_ADDR) {
> -		dev_err(&pci_dev->dev, "No valid IO-ports received!\n");
> -		goto error;
> +		return -EINVAL;
>  	}
> 
>  	/* query chip for its vendor, its version number a.s.o. */
> @@ -450,8 +422,8 @@ static int __devinit tpm_inf_probe(struc
>  	if ((vendorid[0] << 8 | vendorid[1]) == (TPM_INFINEON_DEV_VEN_VALUE)) {
> 
>  		if (tpm_inf.base == 0) {
> -			dev_err(&pci_dev->dev, "No IO-ports found!\n");
> -			goto error;
> +			dev_err(&dev->dev, "No IO-ports found!\n");
> +			return -EIO;
>  		}
>  		/* configure TPM with IO-ports */
>  		outb(IOLIMH, TPM_INF_ADDR);
> @@ -466,10 +438,10 @@ static int __devinit tpm_inf_probe(struc
>  		iol = inb(TPM_INF_DATA);
> 
>  		if ((ioh << 8 | iol) != tpm_inf.base) {
> -			dev_err(&pci_dev->dev,
> +			dev_err(&dev->dev,
>  				"Could not set IO-ports to %04x\n",
>  				tpm_inf.base);
> -			goto error;
> +			return -EIO;
>  		}
> 
>  		/* activate register */
> @@ -481,7 +453,7 @@ static int __devinit tpm_inf_probe(struc
>  		outb(RESET_LP_IRQC_DISABLE, tpm_inf.base + CMD);
> 
>  		/* Finally, we're done, print some infos */
> -		dev_info(&pci_dev->dev, "TPM found: "
> +		dev_info(&dev->dev, "TPM found: "
>  			 "config base 0x%x, "
>  			 "io base 0x%x, "
>  			 "chip version %02x%02x, "
> @@ -489,67 +461,48 @@ static int __devinit tpm_inf_probe(struc
>  			 "product id %02x%02x"
>  			 "%s\n",
>  			 TPM_INF_ADDR,
> -			 tpm_inf.base,
> +			 TPM_INF_BASE,
>  			 version[0], version[1],
>  			 vendorid[0], vendorid[1],
>  			 productid[0], productid[1], chipname);
> 
> -		rc = tpm_register_hardware(&pci_dev->dev, &tpm_inf);
> -		if (rc < 0)
> -			goto error;
> +		rc = tpm_register_hardware(&dev->dev, &tpm_inf);
> +		if (rc < 0) {
> +			return -ENODEV;
> +		}
>  		return 0;
>  	} else {
> -		dev_info(&pci_dev->dev, "No Infineon TPM found!\n");
> -error:
> -		pnp_unregister_driver(&tpm_inf_pnp);
> -error2:
> -		pci_disable_device(pci_dev);
> -		pnp_registered = 0;
> +		dev_info(&dev->dev, "No Infineon TPM found!\n");
>  		return -ENODEV;
>  	}
>  }
> 
> -static __devexit void tpm_inf_remove(struct pci_dev* pci_dev)
> +static __devexit void tpm_inf_pnp_remove(struct pnp_dev *dev)
>  {
> -	struct tpm_chip* chip = pci_get_drvdata(pci_dev);
> -	
> -	if( chip )
> +	struct tpm_chip *chip = pnp_get_drvdata(dev);
> +
> +	if (chip)
>  		tpm_remove_hardware(chip->dev);
>  }
> 
> -static struct pci_device_id tpm_pci_tbl[] __devinitdata = {
> -	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0)},
> -	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12)},
> -	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0)},
> -	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12)},
> -	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0)},
> -	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0)},
> -	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1)},
> -	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_2)},
> -	{0,}
> -};
> -
> -MODULE_DEVICE_TABLE(pci, tpm_pci_tbl);
> -
> -static struct pci_driver inf_pci_driver = {
> -	.name = "tpm_inf",
> -	.id_table = tpm_pci_tbl,
> -	.probe = tpm_inf_probe,
> -	.remove = __devexit_p(tpm_inf_remove),
> -	.suspend = tpm_pm_suspend,
> -	.resume = tpm_pm_resume,
> +static struct pnp_driver tpm_inf_pnp = {
> +	.name = "tpm_inf_pnp",
> +	.driver.owner = THIS_MODULE,
> +	.id_table = tpm_pnp_tbl,
> +	.probe = tpm_inf_pnp_probe,
> +	.remove = tpm_inf_pnp_remove,
> +	.driver.suspend = tpm_pm_suspend,
> +	.driver.resume = tpm_pm_resume,
>  };
> 
>  static int __init init_inf(void)
>  {
> -	return pci_register_driver(&inf_pci_driver);
> +	return pnp_register_driver(&tpm_inf_pnp);
>  }
> 
>  static void __exit cleanup_inf(void)
>  {
> -	if (pnp_registered)
> -		pnp_unregister_driver(&tpm_inf_pnp);
> -	pci_unregister_driver(&inf_pci_driver);
> +	pnp_unregister_driver(&tpm_inf_pnp);
>  }
> 
>  module_init(init_inf);
> @@ -557,5 +510,5 @@ module_exit(cleanup_inf);
> 
>  MODULE_AUTHOR("Marcel Selhorst <[email protected]>");
>  MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT 1.1 / SLB 9635 TT 1.2");
> -MODULE_VERSION("1.5");
> +MODULE_VERSION("1.6");
>  MODULE_LICENSE("GPL");
> 

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux