Re: 2.6.14-rc4-mm1 and later: second ata_piix controller is invisible

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Max Kellermann <[email protected]> wrote:
>
> Hi Andrew,
> 
> since 2.6.14-rc4-mm1, my second ata_piix (SATA) controller does not
> show up in dmesg, effectively hiding /dev/sdb.  2.6.14-rc2-mm2 and
> older (with the same kernel config) were ok, the same for Linus'
> kernels: 2.6.14-rc5 without -mm1 has /dev/sdb, too.
> 
> 0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150
> Storage Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
> 0000:00:1f.2 0101: 8086:24d1 (rev 02)
> 
> This PCI device (on-board on an Asus P4 mainboard) has two SATA
> connectors, showing up as ata1/sda and ata2/sdb.
> 
> dmesg from 2.6.14-rc5:
> 
> libata version 1.12 loaded.
> ata_piix version 1.04
> ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 177
> PCI: Setting latency timer of device 0000:00:1f.2 to 64
> ata1: SATA max UDMA/133 cmd 0xEFE0 ctl 0xEFAE bmdma 0xEF60 irq 177
> ata2: SATA max UDMA/133 cmd 0xEFA0 ctl 0xEFAA bmdma 0xEF68 irq 177
> ata1: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01
> 87:4003 88:207f
> ata1: dev 0 ATA, max UDMA/133, 240121728 sectors:
> ata1: dev 0 configured for UDMA/133
> 
> dmesg from 2.6.14-rc5-mm1:
> 
> libata version 1.12 loaded.
> ata_piix version 1.04
> ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 193
> PCI: Setting latency timer of device 0000:00:1f.2 to 64
> ata1: SATA max UDMA/133 cmd 0xEFE0 ctl 0xEFAE bmdma 0xEF60 irq 193
> ata1: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01
> 87:4003 88:207f
> ata1: dev 0 ATA-7, max UDMA/133, 240121728 sectors: LBA
> ata1: dev 0 configured for UDMA/133
> 
> Need more information?  I could try to disable a few patches from your
> -mm series if you name some..  it's too hard for me to guess which one
> could be responsible for the breakage.
> 

Thanks.  It'd be useful if you could test just 2.6.14-rc5+git-acpi.patch,
see if that does the same thing.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux