On Sat, Oct 22, 2005 at 03:14:34PM -0700, Roland Dreier wrote:
> The current quirk_amd_8131_ioapic() function sets a global
> pci_msi_quirk flag, which disables MSI/MSI-X for all devices in the
> system. This is safe but suboptimal, because there may be devices on
> other buses not related to the AMD 8131 bridge, for which MSI would
> work fine. As an example, see the end of this email for a lspci -t
> from a real Opteron system that has PCI-X buses coming from an AMD
> 8131 and PCI Express buses coming from an Nforce4 bridge -- MSI works
> fine for the Mellanox InfiniBand adapter on the PCIe bus, if we allow
> it to be enabled.
>
> I guess what we really should be doing is setting the dev->no_msi flag
> for all devices below the AMD 8131 PCI-X bridge rather than turning
> off MSI globally. Of course this is somewhat tricky, since a device
> could be hotplugged onto a bus below the AMD 8131. Greg, any thoughts
> about the proper way to use the driver model infrastructure to handle
> this?
Perhaps the right thing to do is to change pad2 (in struct pci_bus) to
bus_flags and make bit 0 PCI_BRIDGE_FLAGS_NO_MSI ?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]