Hi,
On Tuesday, 18 of October 2005 03:01, Alan Stern wrote:
> On Mon, 17 Oct 2005, Rafael J. Wysocki wrote:
> > On Monday, 17 of October 2005 20:54, Alan Stern wrote:
> > > On Mon, 17 Oct 2005, Pavel Machek wrote:
> > >
> > > > Hi!
> > > >
> > > > In -mm, usb breaks suspend to disk. Compiled without
> > > > CONFIG_USB_SUSPEND, it just plainly fails; iwth USB_SUSPEND, it
> > > > actually tries to suspend USB, but it fails and machine refuses to
> > > > suspend. Is it known or is it worth debugging?
> > >
> > > More details please.
> >
> > Fails for me too on x86-64, with the following messages:
> >
> > Stopping tasks: ========================|
> > Freeing memory... done (14642 pages freed)
> > Suspending device card0-0
> > Suspending device 2-2:1.0
> > Suspending device 2-2
> > Suspending device 3-0:1.0
> > hub 3-0:1.0: no suspend?
> > Suspending device usb3
> > Could not suspend device usb3: error -16
> > Some devices failed to suspend
> > Restarting tasks... done
> >
> > where the USB-related info returned by the kernel is this:
> >
> > ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
> > ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 11
> > ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 11 (level, low) -> IRQ 11
> > PCI: Setting latency timer of device 0000:00:02.0 to 64
> > ohci_hcd 0000:00:02.0: OHCI Host Controller
> > ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
> > ohci_hcd 0000:00:02.0: irq 11, io mem 0xfebfb000
> > hub 1-0:1.0: USB hub found
> > hub 1-0:1.0: 3 ports detected
> > ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 11
> > ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 11 (level, low) -> IRQ 11
> > PCI: Setting latency timer of device 0000:00:02.1 to 64
> > ohci_hcd 0000:00:02.1: OHCI Host Controller
> > ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
> > ohci_hcd 0000:00:02.1: irq 11, io mem 0xfebfc000
> > hub 2-0:1.0: USB hub found
> > hub 2-0:1.0: 3 ports detected
> > ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 5
> > usb 2-2: new low speed USB device using ohci_hcd and address 2
> > PCI: setting IRQ 5 as level-triggered
> > ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 5 (level, low) -> IRQ 5
> > PCI: Setting latency timer of device 0000:00:02.2 to 64
> > ehci_hcd 0000:00:02.2: EHCI Host Controller
> > ehci_hcd 0000:00:02.2: debug port 1
> > ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
> > ehci_hcd 0000:00:02.2: irq 5, io mem 0xfebfdc00
> > PCI: cache line size of 64 is not supported by device 0000:00:02.2
> > ehci_hcd 0000:00:02.2: park 0
> > ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
> > usb 2-2: device descriptor read/all, error -110
> > hub 3-0:1.0: USB hub found
> > hub 3-0:1.0: 6 ports detected
> > ohci_hcd 0000:00:02.1: wakeup
> > usb 2-2: new low speed USB device using ohci_hcd and address 4
> > usbcore: registered new driver hiddev
> > input: Logitech USB Receiver//class/input_dev as input3
> > input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-2
> > usbcore: registered new driver usbhid
> > drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> >
> > Greetings,
> > Rafael
>
> Weird.
>
> I can't tell what happened. But I can tell you that USB development
> goes on in Greg K-H's tree. The current version is available as a patch
> based on 2.6.14-rc4:
>
> http://www.kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/gregkh-all-2.6.14-rc4.patch
>
> On top of that you should apply the patch for uhci-hcd that I mentioned
> before. With this combination I have had no problem suspending three
> different machines. Sometimes they even wake up, too! :-)
Thanks a lot for all the information.
Still I'd rather like to figure out what causes the problem to appear
in -rc4-mm1. So far I have identified the offending patch which is:
gregkh-usb-usb-power-state-03.patch
(ie. with the patch the problem occurs 100% of the time and without
the patch it doesn't). I don't know which change in the patch is at
fault (yet). [Note: the patch didn't revert cleanly so I changed the
7th chunk in drivers/usb/core/hub.c a bit.]
The devices that refuse to suspend (with the above patch) are:
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.14-rc4-mm1 ehci_hcd
usb usb3: SerialNumber: 0000:00:02.2
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.14-rc4-mm1 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.1
Greetings,
Rafael
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
