Re: Latency data - 2.6.14-rc3-rt13

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/10/05, Daniel Walker <[email protected]> wrote:
> On Mon, 2005-10-10 at 14:28 -0700, Mark Knecht wrote:
> > On 10/10/05, Mark Knecht <[email protected]> wrote:
> > <SNIP>
> > > > then goto Kernel Hacking and select
> > > > "Interrupts-off critical section latency timing"
> > > > Then select "Latency tracing"
> >
> > Only had to turn on Latency Tracing. The others I had on...
> >
> > <SNIP>
> > > >
> > > > Daniel
> > >
> > > Will do. Building now. I'll be back later.
> > >
> >
> > Unfortunately I didn't think I'd be back this fast. I built the new
> > kernel and rebooted. The boot starts, gets down to the point where it
> > tells me that the preempt debug stuff is on, and then jumps to an
> > endlessly repeating error message:
> >
> > init[1]: segfault at ffffffff8010fce0 rip ffffffff8010fce0 rsp
> > 00007fffffcb09b8 error 15
> >
> > This error repeasts endlessly until I reboot.
> >
> > Good thing I had another kernel I could boot back into! ;-)
> >
> > So, something isn't happy. Is this a -rt thing or a kernel issue?
>
> Hmm, it looks like latency tracing doesn't work on x86_64 .. I guess
> you'll have to wait till someone fixes it .
>
> Another option is to turn off "Latency Tracing" then reboot, like it was
> before but w/o the histogram. Then run,
>
> "echo 0 > /proc/sys/kernel/preempt_max_latency"
>
> Whenever a new maximum latency is observed it will log it with a stack
> trace in the system logs. You can report that back here on LKML .
>
> You can view the system log with the command "dmesg" , I think .
>
> Daniel
>
>
Yes, already that looks interesting. Do I have something going on with
acpi? This is before running Jack. I'm in Gnome.There are a lot of
these messages, but they've stopped. I suppose the 3997 is the delay?
That would coorespond with the info I sent earlier.

( softirq-timer/0-3    |#0): new 3997 us maximum-latency critical section.
 => started at timestamp 185717289: <acpi_processor_idle+0x20/0x379>
 =>   ended at timestamp 185721287: <thread_return+0xb5/0x11a>

Call Trace:<ffffffff801519ac>{check_critical_timing+492}
<ffffffff80151e05>{sub_preempt_count_ti+133}
       <ffffffff803f632c>{thread_return+70}
<ffffffff803f639b>{thread_return+181}
       <ffffffff803f6505>{schedule+261} <ffffffff8013a84a>{ksoftirqd+138}
       <ffffffff8013a7c0>{ksoftirqd+0} <ffffffff8014aa8d>{kthread+205}
       <ffffffff8010f716>{child_rip+8} <ffffffff8014a9c0>{kthread+0}
       <ffffffff8010f70e>{child_rip+0}
---------------------------
| preempt count: 00000001 ]
| 1-level deep critical section nesting:
----------------------------------------
.. [<ffffffff803f5df8>] .... __schedule+0xb8/0x5a6
.....[<00000000>] ..   ( <= 0x0)

 =>   dump-end timestamp 185721364

mark@lightning ~ $

   I started up Jack, mounted my 1394 drives and started streaming a
little bit of data. Basicaly my ultra-light load test. I see nothing
new in dmesg yet. I'll keep watching.

Thanks,
Mark
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux