[PATCH 16/22] PCI Address cache lookup code

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



16-pci-address-cache.patch

Architecture-independent PCI address caching code. 
Performs caching and lookup of pci devices based on the
I/O addresses that they use. That is, given an I/O address,
this can be used to find the pci device that uses that address.
Although it currently lives in teh ppc64 directory, it 
could potentially be common code.

This code used to live in the overly large EEH file.
This patch splits it out to its own file.

Signed-off-by: Linas Vepstas <[email protected]>

Index: linux-2.6.14-rc2-git6/arch/ppc64/kernel/Makefile
===================================================================
--- linux-2.6.14-rc2-git6.orig/arch/ppc64/kernel/Makefile	2005-10-06 17:54:14.496454897 -0500
+++ linux-2.6.14-rc2-git6/arch/ppc64/kernel/Makefile	2005-10-06 17:56:42.934627625 -0500
@@ -37,7 +37,7 @@
 			 bpa_iic.o spider-pic.o
 
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o
-obj-$(CONFIG_EEH)		+= eeh.o eeh_driver.o eeh_event.o pci_dlpar.o
+obj-$(CONFIG_EEH)		+= eeh.o eeh_cache.o eeh_driver.o eeh_event.o pci_dlpar.o
 obj-$(CONFIG_PROC_FS)		+= proc_ppc64.o
 obj-$(CONFIG_RTAS_FLASH)	+= rtas_flash.o
 obj-$(CONFIG_SMP)		+= smp.o
Index: linux-2.6.14-rc2-git6/arch/ppc64/kernel/eeh.c
===================================================================
--- linux-2.6.14-rc2-git6.orig/arch/ppc64/kernel/eeh.c	2005-10-06 17:54:14.494455177 -0500
+++ linux-2.6.14-rc2-git6/arch/ppc64/kernel/eeh.c	2005-10-06 17:56:42.936627345 -0500
@@ -78,9 +78,6 @@
  */
 #define EEH_MAX_FAILS	100000
 
-/* Misc forward declaraions */
-static void eeh_save_bars(struct pci_dev * pdev, struct pci_dn *pdn);
-
 /* RTAS tokens */
 static int ibm_set_eeh_option;
 static int ibm_set_slot_reset;
@@ -108,296 +105,8 @@
 static DEFINE_PER_CPU(unsigned long, ignored_failures);
 static DEFINE_PER_CPU(unsigned long, slot_resets);
 
-/**
- * The pci address cache subsystem.  This subsystem places
- * PCI device address resources into a red-black tree, sorted
- * according to the address range, so that given only an i/o
- * address, the corresponding PCI device can be **quickly**
- * found. It is safe to perform an address lookup in an interrupt
- * context; this ability is an important feature.
- *
- * Currently, the only customer of this code is the EEH subsystem;
- * thus, this code has been somewhat tailored to suit EEH better.
- * In particular, the cache does *not* hold the addresses of devices
- * for which EEH is not enabled.
- *
- * (Implementation Note: The RB tree seems to be better/faster
- * than any hash algo I could think of for this problem, even
- * with the penalty of slow pointer chases for d-cache misses).
- */
-struct pci_io_addr_range
-{
-	struct rb_node rb_node;
-	unsigned long addr_lo;
-	unsigned long addr_hi;
-	struct pci_dev *pcidev;
-	unsigned int flags;
-};
-
-static struct pci_io_addr_cache
-{
-	struct rb_root rb_root;
-	spinlock_t piar_lock;
-} pci_io_addr_cache_root;
-
-static inline struct pci_dev *__pci_get_device_by_addr(unsigned long addr)
-{
-	struct rb_node *n = pci_io_addr_cache_root.rb_root.rb_node;
-
-	while (n) {
-		struct pci_io_addr_range *piar;
-		piar = rb_entry(n, struct pci_io_addr_range, rb_node);
-
-		if (addr < piar->addr_lo) {
-			n = n->rb_left;
-		} else {
-			if (addr > piar->addr_hi) {
-				n = n->rb_right;
-			} else {
-				pci_dev_get(piar->pcidev);
-				return piar->pcidev;
-			}
-		}
-	}
-
-	return NULL;
-}
-
-/**
- * pci_get_device_by_addr - Get device, given only address
- * @addr: mmio (PIO) phys address or i/o port number
- *
- * Given an mmio phys address, or a port number, find a pci device
- * that implements this address.  Be sure to pci_dev_put the device
- * when finished.  I/O port numbers are assumed to be offset
- * from zero (that is, they do *not* have pci_io_addr added in).
- * It is safe to call this function within an interrupt.
- */
-static struct pci_dev *pci_get_device_by_addr(unsigned long addr)
-{
-	struct pci_dev *dev;
-	unsigned long flags;
-
-	spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags);
-	dev = __pci_get_device_by_addr(addr);
-	spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
-	return dev;
-}
-
-#ifdef DEBUG
-/*
- * Handy-dandy debug print routine, does nothing more
- * than print out the contents of our addr cache.
- */
-static void pci_addr_cache_print(struct pci_io_addr_cache *cache)
-{
-	struct rb_node *n;
-	int cnt = 0;
-
-	n = rb_first(&cache->rb_root);
-	while (n) {
-		struct pci_io_addr_range *piar;
-		piar = rb_entry(n, struct pci_io_addr_range, rb_node);
-		printk(KERN_DEBUG "PCI: %s addr range %d [%lx-%lx]: %s\n",
-		       (piar->flags & IORESOURCE_IO) ? "i/o" : "mem", cnt,
-		       piar->addr_lo, piar->addr_hi, pci_name(piar->pcidev));
-		cnt++;
-		n = rb_next(n);
-	}
-}
-#endif
-
-/* Insert address range into the rb tree. */
-static struct pci_io_addr_range *
-pci_addr_cache_insert(struct pci_dev *dev, unsigned long alo,
-		      unsigned long ahi, unsigned int flags)
-{
-	struct rb_node **p = &pci_io_addr_cache_root.rb_root.rb_node;
-	struct rb_node *parent = NULL;
-	struct pci_io_addr_range *piar;
-
-	/* Walk tree, find a place to insert into tree */
-	while (*p) {
-		parent = *p;
-		piar = rb_entry(parent, struct pci_io_addr_range, rb_node);
-		if (ahi < piar->addr_lo) {
-			p = &parent->rb_left;
-		} else if (alo > piar->addr_hi) {
-			p = &parent->rb_right;
-		} else {
-			if (dev != piar->pcidev ||
-			    alo != piar->addr_lo || ahi != piar->addr_hi) {
-				printk(KERN_WARNING "PIAR: overlapping address range\n");
-			}
-			return piar;
-		}
-	}
-	piar = (struct pci_io_addr_range *)kmalloc(sizeof(struct pci_io_addr_range), GFP_ATOMIC);
-	if (!piar)
-		return NULL;
-
-	piar->addr_lo = alo;
-	piar->addr_hi = ahi;
-	piar->pcidev = dev;
-	piar->flags = flags;
-
-#ifdef DEBUG
-	printk(KERN_DEBUG "PIAR: insert range=[%lx:%lx] dev=%s\n",
-	                  alo, ahi, pci_name (dev));
-#endif
-
-	rb_link_node(&piar->rb_node, parent, p);
-	rb_insert_color(&piar->rb_node, &pci_io_addr_cache_root.rb_root);
-
-	return piar;
-}
-
-static void __pci_addr_cache_insert_device(struct pci_dev *dev)
-{
-	struct device_node *dn;
-	struct pci_dn *pdn;
-	int i;
-	int inserted = 0;
-
-	dn = pci_device_to_OF_node(dev);
-	if (!dn) {
-		printk(KERN_WARNING "PCI: no pci dn found for dev=%s\n", pci_name(dev));
-		return;
-	}
-
-	/* Skip any devices for which EEH is not enabled. */
-	pdn = PCI_DN(dn);
-	if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) ||
-	    pdn->eeh_mode & EEH_MODE_NOCHECK) {
-#ifdef DEBUG
-		printk(KERN_INFO "PCI: skip building address cache for=%s - %s\n",
-		       pci_name(dev), pdn->node->full_name);
-#endif
-		return;
-	}
-
-	/* The cache holds a reference to the device... */
-	pci_dev_get(dev);
-
-	/* Walk resources on this device, poke them into the tree */
-	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-		unsigned long start = pci_resource_start(dev,i);
-		unsigned long end = pci_resource_end(dev,i);
-		unsigned int flags = pci_resource_flags(dev,i);
-
-		/* We are interested only bus addresses, not dma or other stuff */
-		if (0 == (flags & (IORESOURCE_IO | IORESOURCE_MEM)))
-			continue;
-		if (start == 0 || ~start == 0 || end == 0 || ~end == 0)
-			 continue;
-		pci_addr_cache_insert(dev, start, end, flags);
-		inserted = 1;
-	}
-
-	/* If there was nothing to add, the cache has no reference... */
-	if (!inserted)
-		pci_dev_put(dev);
-}
-
-/**
- * pci_addr_cache_insert_device - Add a device to the address cache
- * @dev: PCI device whose I/O addresses we are interested in.
- *
- * In order to support the fast lookup of devices based on addresses,
- * we maintain a cache of devices that can be quickly searched.
- * This routine adds a device to that cache.
- */
-static void pci_addr_cache_insert_device(struct pci_dev *dev)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags);
-	__pci_addr_cache_insert_device(dev);
-	spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
-}
-
-static inline void __pci_addr_cache_remove_device(struct pci_dev *dev)
-{
-	struct rb_node *n;
-	int removed = 0;
-
-restart:
-	n = rb_first(&pci_io_addr_cache_root.rb_root);
-	while (n) {
-		struct pci_io_addr_range *piar;
-		piar = rb_entry(n, struct pci_io_addr_range, rb_node);
-
-		if (piar->pcidev == dev) {
-			rb_erase(n, &pci_io_addr_cache_root.rb_root);
-			removed = 1;
-			kfree(piar);
-			goto restart;
-		}
-		n = rb_next(n);
-	}
-
-	/* The cache no longer holds its reference to this device... */
-	if (removed)
-		pci_dev_put(dev);
-}
-
-/**
- * pci_addr_cache_remove_device - remove pci device from addr cache
- * @dev: device to remove
- *
- * Remove a device from the addr-cache tree.
- * This is potentially expensive, since it will walk
- * the tree multiple times (once per resource).
- * But so what; device removal doesn't need to be that fast.
- */
-static void pci_addr_cache_remove_device(struct pci_dev *dev)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags);
-	__pci_addr_cache_remove_device(dev);
-	spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
-}
-
-/**
- * pci_addr_cache_build - Build a cache of I/O addresses
- *
- * Build a cache of pci i/o addresses.  This cache will be used to
- * find the pci device that corresponds to a given address.
- * This routine scans all pci busses to build the cache.
- * Must be run late in boot process, after the pci controllers
- * have been scaned for devices (after all device resources are known).
- */
-void __init pci_addr_cache_build(void)
-{
-	struct device_node *dn;
-	struct pci_dev *dev = NULL;
-
-	if (!eeh_subsystem_enabled)
-		return;
-
-	spin_lock_init(&pci_io_addr_cache_root.piar_lock);
-
-	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
-		/* Ignore PCI bridges ( XXX why ??) */
-		if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) {
-			continue;
-		}
-		pci_addr_cache_insert_device(dev);
-
-		/* Save the BAR's; firmware doesn't restore these after EEH reset */
-		dn = pci_device_to_OF_node(dev);
-		eeh_save_bars(dev, PCI_DN(dn));
-	}
-
-#ifdef DEBUG
-	/* Verify tree built up above, echo back the list of addrs. */
-	pci_addr_cache_print(&pci_io_addr_cache_root);
-#endif
-}
-
 /* --------------------------------------------------------------- */
-/* Above lies the PCI Address Cache. Below lies the EEH event infrastructure */
+/* Below lies the EEH event infrastructure */
 
 void eeh_slot_error_detail (struct pci_dn *pdn, int severity)
 {
@@ -881,7 +590,7 @@
  * PCI devices are added individuallly; but, for the restore,
  * an entire slot is reset at a time.
  */
-static void eeh_save_bars(struct pci_dev * pdev, struct pci_dn *pdn)
+void eeh_save_bars(struct pci_dev * pdev, struct pci_dn *pdn)
 {
 	int i;
 
Index: linux-2.6.14-rc2-git6/arch/ppc64/kernel/eeh_cache.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.14-rc2-git6/arch/ppc64/kernel/eeh_cache.c	2005-10-06 17:56:42.937627204 -0500
@@ -0,0 +1,316 @@
+/*
+ * eeh_cache.c
+ * PCI address cache; allows the lookup of PCI devices based on I/O address
+ *
+ * Copyright (C) 2004 Linas Vepstas <[email protected]> IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/list.h>
+#include <linux/pci.h>
+#include <linux/rbtree.h>
+#include <linux/spinlock.h>
+#include <asm/atomic.h>
+#include <asm/systemcfg.h>
+#include "pci.h"
+
+#undef DEBUG
+
+/**
+ * The pci address cache subsystem.  This subsystem places
+ * PCI device address resources into a red-black tree, sorted
+ * according to the address range, so that given only an i/o
+ * address, the corresponding PCI device can be **quickly**
+ * found. It is safe to perform an address lookup in an interrupt
+ * context; this ability is an important feature.
+ *
+ * Currently, the only customer of this code is the EEH subsystem;
+ * thus, this code has been somewhat tailored to suit EEH better.
+ * In particular, the cache does *not* hold the addresses of devices
+ * for which EEH is not enabled.
+ *
+ * (Implementation Note: The RB tree seems to be better/faster
+ * than any hash algo I could think of for this problem, even
+ * with the penalty of slow pointer chases for d-cache misses).
+ */
+struct pci_io_addr_range
+{
+	struct rb_node rb_node;
+	unsigned long addr_lo;
+	unsigned long addr_hi;
+	struct pci_dev *pcidev;
+	unsigned int flags;
+};
+
+static struct pci_io_addr_cache
+{
+	struct rb_root rb_root;
+	spinlock_t piar_lock;
+} pci_io_addr_cache_root;
+
+static inline struct pci_dev *__pci_get_device_by_addr(unsigned long addr)
+{
+	struct rb_node *n = pci_io_addr_cache_root.rb_root.rb_node;
+
+	while (n) {
+		struct pci_io_addr_range *piar;
+		piar = rb_entry(n, struct pci_io_addr_range, rb_node);
+
+		if (addr < piar->addr_lo) {
+			n = n->rb_left;
+		} else {
+			if (addr > piar->addr_hi) {
+				n = n->rb_right;
+			} else {
+				pci_dev_get(piar->pcidev);
+				return piar->pcidev;
+			}
+		}
+	}
+
+	return NULL;
+}
+
+/**
+ * pci_get_device_by_addr - Get device, given only address
+ * @addr: mmio (PIO) phys address or i/o port number
+ *
+ * Given an mmio phys address, or a port number, find a pci device
+ * that implements this address.  Be sure to pci_dev_put the device
+ * when finished.  I/O port numbers are assumed to be offset
+ * from zero (that is, they do *not* have pci_io_addr added in).
+ * It is safe to call this function within an interrupt.
+ */
+struct pci_dev *pci_get_device_by_addr(unsigned long addr)
+{
+	struct pci_dev *dev;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags);
+	dev = __pci_get_device_by_addr(addr);
+	spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
+	return dev;
+}
+
+#ifdef DEBUG
+/*
+ * Handy-dandy debug print routine, does nothing more
+ * than print out the contents of our addr cache.
+ */
+static void pci_addr_cache_print(struct pci_io_addr_cache *cache)
+{
+	struct rb_node *n;
+	int cnt = 0;
+
+	n = rb_first(&cache->rb_root);
+	while (n) {
+		struct pci_io_addr_range *piar;
+		piar = rb_entry(n, struct pci_io_addr_range, rb_node);
+		printk(KERN_DEBUG "PCI: %s addr range %d [%lx-%lx]: %s\n",
+		       (piar->flags & IORESOURCE_IO) ? "i/o" : "mem", cnt,
+		       piar->addr_lo, piar->addr_hi, pci_name(piar->pcidev));
+		cnt++;
+		n = rb_next(n);
+	}
+}
+#endif
+
+/* Insert address range into the rb tree. */
+static struct pci_io_addr_range *
+pci_addr_cache_insert(struct pci_dev *dev, unsigned long alo,
+		      unsigned long ahi, unsigned int flags)
+{
+	struct rb_node **p = &pci_io_addr_cache_root.rb_root.rb_node;
+	struct rb_node *parent = NULL;
+	struct pci_io_addr_range *piar;
+
+	/* Walk tree, find a place to insert into tree */
+	while (*p) {
+		parent = *p;
+		piar = rb_entry(parent, struct pci_io_addr_range, rb_node);
+		if (ahi < piar->addr_lo) {
+			p = &parent->rb_left;
+		} else if (alo > piar->addr_hi) {
+			p = &parent->rb_right;
+		} else {
+			if (dev != piar->pcidev ||
+			    alo != piar->addr_lo || ahi != piar->addr_hi) {
+				printk(KERN_WARNING "PIAR: overlapping address range\n");
+			}
+			return piar;
+		}
+	}
+	piar = (struct pci_io_addr_range *)kmalloc(sizeof(struct pci_io_addr_range), GFP_ATOMIC);
+	if (!piar)
+		return NULL;
+
+	piar->addr_lo = alo;
+	piar->addr_hi = ahi;
+	piar->pcidev = dev;
+	piar->flags = flags;
+
+#ifdef DEBUG
+	printk(KERN_DEBUG "PIAR: insert range=[%lx:%lx] dev=%s\n",
+	                  alo, ahi, pci_name (dev));
+#endif
+
+	rb_link_node(&piar->rb_node, parent, p);
+	rb_insert_color(&piar->rb_node, &pci_io_addr_cache_root.rb_root);
+
+	return piar;
+}
+
+static void __pci_addr_cache_insert_device(struct pci_dev *dev)
+{
+	struct device_node *dn;
+	struct pci_dn *pdn;
+	int i;
+	int inserted = 0;
+
+	dn = pci_device_to_OF_node(dev);
+	if (!dn) {
+		printk(KERN_WARNING "PCI: no pci dn found for dev=%s\n", pci_name(dev));
+		return;
+	}
+
+	/* Skip any devices for which EEH is not enabled. */
+	pdn = PCI_DN(dn);
+	if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) ||
+	    pdn->eeh_mode & EEH_MODE_NOCHECK) {
+#ifdef DEBUG
+		printk(KERN_INFO "PCI: skip building address cache for=%s - %s\n",
+		       pci_name(dev), pdn->node->full_name);
+#endif
+		return;
+	}
+
+	/* The cache holds a reference to the device... */
+	pci_dev_get(dev);
+
+	/* Walk resources on this device, poke them into the tree */
+	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+		unsigned long start = pci_resource_start(dev,i);
+		unsigned long end = pci_resource_end(dev,i);
+		unsigned int flags = pci_resource_flags(dev,i);
+
+		/* We are interested only bus addresses, not dma or other stuff */
+		if (0 == (flags & (IORESOURCE_IO | IORESOURCE_MEM)))
+			continue;
+		if (start == 0 || ~start == 0 || end == 0 || ~end == 0)
+			 continue;
+		pci_addr_cache_insert(dev, start, end, flags);
+		inserted = 1;
+	}
+
+	/* If there was nothing to add, the cache has no reference... */
+	if (!inserted)
+		pci_dev_put(dev);
+}
+
+/**
+ * pci_addr_cache_insert_device - Add a device to the address cache
+ * @dev: PCI device whose I/O addresses we are interested in.
+ *
+ * In order to support the fast lookup of devices based on addresses,
+ * we maintain a cache of devices that can be quickly searched.
+ * This routine adds a device to that cache.
+ */
+void pci_addr_cache_insert_device(struct pci_dev *dev)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags);
+	__pci_addr_cache_insert_device(dev);
+	spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
+}
+
+static inline void __pci_addr_cache_remove_device(struct pci_dev *dev)
+{
+	struct rb_node *n;
+	int removed = 0;
+
+restart:
+	n = rb_first(&pci_io_addr_cache_root.rb_root);
+	while (n) {
+		struct pci_io_addr_range *piar;
+		piar = rb_entry(n, struct pci_io_addr_range, rb_node);
+
+		if (piar->pcidev == dev) {
+			rb_erase(n, &pci_io_addr_cache_root.rb_root);
+			removed = 1;
+			kfree(piar);
+			goto restart;
+		}
+		n = rb_next(n);
+	}
+
+	/* The cache no longer holds its reference to this device... */
+	if (removed)
+		pci_dev_put(dev);
+}
+
+/**
+ * pci_addr_cache_remove_device - remove pci device from addr cache
+ * @dev: device to remove
+ *
+ * Remove a device from the addr-cache tree.
+ * This is potentially expensive, since it will walk
+ * the tree multiple times (once per resource).
+ * But so what; device removal doesn't need to be that fast.
+ */
+void pci_addr_cache_remove_device(struct pci_dev *dev)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags);
+	__pci_addr_cache_remove_device(dev);
+	spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
+}
+
+/**
+ * pci_addr_cache_build - Build a cache of I/O addresses
+ *
+ * Build a cache of pci i/o addresses.  This cache will be used to
+ * find the pci device that corresponds to a given address.
+ * This routine scans all pci busses to build the cache.
+ * Must be run late in boot process, after the pci controllers
+ * have been scaned for devices (after all device resources are known).
+ */
+void __init pci_addr_cache_build(void)
+{
+	struct device_node *dn;
+	struct pci_dev *dev = NULL;
+
+	spin_lock_init(&pci_io_addr_cache_root.piar_lock);
+
+	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+		/* Ignore PCI bridges */
+		if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
+			continue;
+
+		pci_addr_cache_insert_device(dev);
+
+		/* Save the BAR's; firmware doesn't restore these after EEH reset */
+		dn = pci_device_to_OF_node(dev);
+		eeh_save_bars(dev, PCI_DN(dn));
+	}
+
+#ifdef DEBUG
+	/* Verify tree built up above, echo back the list of addrs. */
+	pci_addr_cache_print(&pci_io_addr_cache_root);
+#endif
+}
+
Index: linux-2.6.14-rc2-git6/arch/ppc64/kernel/pci.h
===================================================================
--- linux-2.6.14-rc2-git6.orig/arch/ppc64/kernel/pci.h	2005-10-06 17:54:14.497454757 -0500
+++ linux-2.6.14-rc2-git6/arch/ppc64/kernel/pci.h	2005-10-06 17:56:42.938627064 -0500
@@ -53,6 +53,14 @@
 
 /* ---- EEH internal-use-only related routines ---- */
 #ifdef CONFIG_EEH
+
+void pci_addr_cache_insert_device(struct pci_dev *dev);
+void pci_addr_cache_remove_device(struct pci_dev *dev);
+void pci_addr_cache_build(void);
+struct pci_dev *pci_get_device_by_addr(unsigned long addr);
+
+void eeh_save_bars(struct pci_dev * pdev, struct pci_dn *pdn);
+
 /**
  * eeh_slot_error_detail -- record and EEH error condition to the log
  * @severity: 1 if temporary, 2 if permanent failure.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux