Re: [PATCH 2.6.14-rc2 0/2] libata: Marvell SATA support (v0.23-0.24)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 5 Oct 2005, Brett Russ wrote:

This patch series should fix up lockups that people were seeing due to
improper spinlock placement (nested==bad).  Additionally, there are
other changes to simplify things (complex=bad).  The second patch adds
comment headers to functions that need it.

I guess that 0.24 was not supposed to fix any 50x1 problems, but I just wanted to provide more debug output. The disk (this time another one, but still connected to the first port) is still not detected:

sata_mv version 0.24
ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 26 (level, low) -> IRQ 201
mv_port_init: EDMA cfg=0x0000011f EDMA IRQ err cause/mask=0x00000000/0x00001f7f
mv_port_init: EDMA cfg=0x0000011f EDMA IRQ err cause/mask=0x00000000/0x00001f7f
mv_port_init: EDMA cfg=0x0000011f EDMA IRQ err cause/mask=0x00000000/0x00001f7f
mv_port_init: EDMA cfg=0x0000011f EDMA IRQ err cause/mask=0x00000000/0x00001f7f
mv_host_init: HC0: HC config=0x11dcf013 HC IRQ cause (before clear)=0x00000111
mv_host_init: HC MAIN IRQ cause/mask=0x00000000/0x0007ffff PCI int cause/mask=0x00000000/0x00577fe6
mv_dump_pci_cfg: 00: 504111ab 02b00007 01000003 00002008 mv_dump_pci_cfg: 10: f5000004 00000000 00000000 00000000 mv_dump_pci_cfg: 20: 00000000 00000000 00000000 81241043 mv_dump_pci_cfg: 30: 00000000 00000040 00000000 00000109 mv_dump_pci_cfg: 40: 000a5001 00000000 00000000 00000000 mv_dump_pci_cfg: 50: 00816005 fee01004 00000000 000040d9 mv_dump_pci_cfg: 60: 00300007 01830240 sata_mv(0000:02:08.0) 32 slots 4 ports SCSI mode IRQ via MSI
ata3: SATA max PIO4 cmd 0x0 ctl 0xF8A22120 bmdma 0x0 irq 201
ata4: SATA max PIO4 cmd 0x0 ctl 0xF8A24120 bmdma 0x0 irq 201
ata5: SATA max PIO4 cmd 0x0 ctl 0xF8A26120 bmdma 0x0 irq 201
ata6: SATA max PIO4 cmd 0x0 ctl 0xF8A28120 bmdma 0x0 irq 201
mv_phy_reset: ENTER, port 0, mmio 0xf8a22000
mv_phy_reset: S-regs after ATA_RST: SStat 0x00000000 SErr 0x00000000 SCtrl 0x00000000
mv_phy_reset: S-regs after PHY wake: SStat 0x00000000 SErr 0x00000000 SCtrl 0x00000000
ata3: no device found (phy stat 00000000)
scsi2 : sata_mv
mv_phy_reset: ENTER, port 1, mmio 0xf8a24000
mv_phy_reset: S-regs after ATA_RST: SStat 0x00000000 SErr 0x00000000 SCtrl 0x00000000
mv_phy_reset: S-regs after PHY wake: SStat 0x00000000 SErr 0x00000000 SCtrl 0x00000000
ata4: no device found (phy stat 00000000)
scsi3 : sata_mv
mv_phy_reset: ENTER, port 2, mmio 0xf8a26000
mv_phy_reset: S-regs after ATA_RST: SStat 0x00000000 SErr 0x00000000 SCtrl 0x00000000
mv_phy_reset: S-regs after PHY wake: SStat 0x00000000 SErr 0x00000000 SCtrl 0x00000000
ata5: no device found (phy stat 00000000)
scsi4 : sata_mv
mv_phy_reset: ENTER, port 3, mmio 0xf8a28000
mv_phy_reset: S-regs after ATA_RST: SStat 0x00000000 SErr 0x00000000 SCtrl 0x00000000
mv_phy_reset: S-regs after PHY wake: SStat 0x00000000 SErr 0x00000000 SCtrl 0x00000000
ata6: no device found (phy stat 00000000)
scsi5 : sata_mv

Thanks for working on this driver !

--
Bogdan Costescu

IWR - Interdisziplinaeres Zentrum fuer Wissenschaftliches Rechnen
Universitaet Heidelberg, INF 368, D-69120 Heidelberg, GERMANY
Telephone: +49 6221 54 8869, Telefax: +49 6221 54 8868
E-mail: [email protected]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux