On Fri, 30 Sep 2005, Brett Russ wrote:
> The 5xxx series parts are not yet DMA capable in this driver because
> the registers have differences that haven't been accounted for yet.
In my setup with a MV88SX5041, this new driver doesn't recognize any
disk connected to the controller. The controller seems to be
recognized fine, but nothing else:
sata_mv version 0.22
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 26 (level, low) -> IRQ 209
MSI INIT SUCCESS
sata_mv(0000:02:08.0) 32 slots 4 ports SCSI mode IRQ via MSI
ata3: SATA max PIO4 cmd 0x0 ctl 0xF8A22120 bmdma 0x0 irq 209
ata4: SATA max PIO4 cmd 0x0 ctl 0xF8A24120 bmdma 0x0 irq 209
ata5: SATA max PIO4 cmd 0x0 ctl 0xF8A26120 bmdma 0x0 irq 209
ata6: SATA max PIO4 cmd 0x0 ctl 0xF8A28120 bmdma 0x0 irq 209
ata3: no device found (phy stat 00000000)
scsi2 : sata_mv
ata4: no device found (phy stat 00000000)
scsi3 : sata_mv
ata5: no device found (phy stat 00000000)
scsi4 : sata_mv
ata6: no device found (phy stat 00000000)
scsi5 : sata_mv
(starting at scsi2 'cause the first 2 are on a ata_piix SATA).
/proc/interrupts shows no interrupts received:
209: 0 0 IO-APIC-level libata
Thanks!
--
Bogdan Costescu
IWR - Interdisziplinaeres Zentrum fuer Wissenschaftliches Rechnen
Universitaet Heidelberg, INF 368, D-69120 Heidelberg, GERMANY
Telephone: +49 6221 54 8869, Telefax: +49 6221 54 8868
E-mail: [email protected]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
