2.6.14-rc2-mm2 barfed as well, was: 2.6.14-rc2-git8 crashed with scsi error after 40 hours

[dth@cistron.nl (Danny ter Haar)]

2.6.14-rc2-mm2 just any other 2.6.1[34] kernel so far didn't get _my_
sign of aproval ;-)

reboot   system boot  2.6.14-rc2-mm2   Sun Oct  2 10:05 - crash (1+13:15)

----------
scsi0:0:0:0: Attempting to queue an ABORT message:CDB: 0x2a 0x0 0x1 0xdc 0x49 0xca 0x0 0x0 0x8 0x0
scsi0: At time of recovery, card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State at program address 0x26 Mode 0x22
Card was paused
HS_MAILBOX[0x0] INTCTL[0xc0]:(SWTMINTEN|SWTMINTMASK)
SEQINTSTAT[0x10]:(SEQ_SWTMRTO) SAVED_MODE[0x11]
DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT)

SCB Count = 128 CMDS_PENDING = 32 LASTSCB 0x1a CURRSCB 0x1a NEXTSCB 0xff00
qinstart = 27585 qinfifonext = 27585
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
 36 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
 23 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
------------

Full crash, dmesg/config etc @ http://newsgate.newsserver.nl/kernel/2.6.14-rc2-mm2/

Now compiling 2.6.14-rc3-git3 ...

Danny

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/