Hi,
this patch doesn't work for me. Controller is
03:04.0 RAID bus controller: Marvell MV88SX6041 4-port SATA II PCI-X Controller (rev 03)
Subsystem: Super Micro Computer Inc: Unknown device 6880
Flags: bus master, fast Back2Back, 66Mhz, medium devsel, latency 64, IRQ 20
Memory at dd300000 (64-bit, non-prefetchable) [size=1M]
I/O ports at 3000 [size=256]
Capabilities: [40] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [60] PCI-X non-bridge device.
After modprobe sata_mv I got in dmesg:
sata_mv version 0.22
ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 56 (level, low) -> IRQ 20
sata_mv(0000:03:04.0) 32 slots 4 ports unknown mode IRQ via INTx
ata3: SATA max UDMA/133 cmd 0x0 ctl 0xF8A22120 bmdma 0x0 irq 20
ata4: SATA max UDMA/133 cmd 0x0 ctl 0xF8A24120 bmdma 0x0 irq 20
ata5: SATA max UDMA/133 cmd 0x0 ctl 0xF8A26120 bmdma 0x0 irq 20
ata6: SATA max UDMA/133 cmd 0x0 ctl 0xF8A28120 bmdma 0x0 irq 20
ATA: abnormal status 0x80 on port 0xF8A2211C
ATA: abnormal status 0x80 on port 0xF8A2211C
modprobe did not finished, and it is impossible to kill the modprobe
process.
Regards,
E.R.
_________________________________________________________________________
Evgeny Rodichev Sternberg Astronomical Institute
email: [email protected] Moscow State University
Phone: 007 (095) 939 2383
Fax: 007 (095) 932 8841 http://www.sai.msu.su/~er
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
